[Serusers] problems when starting ser

"Martínez García, Rebeca" remartinez at indra.es
Wed Dec 23 13:06:23 CET 2009


Hello all,

I have installed ser in Ubuntu Karmic by means of Synaptic without any problems or errors during the installation.
But before starting to configure the ser.cfg, I decided firstly to try the configuration by default and I got this error (I only uncommented the "log_stderror=yes"):

cng at cng:/etc/ser$ ser D E
Listening on
             udp: 127.0.0.1 [127.0.0.1]:5060
             udp: 10.1.3.207 [10.1.3.207]:5060
             udp: 192.168.50.10 [192.168.50.10]:5060
             tcp: 127.0.0.1 [127.0.0.1]:5060
             tcp: 10.1.3.207 [10.1.3.207]:5060
             tcp: 192.168.50.10 [192.168.50.10]:5060
Aliases:
             tcp: cng.local:5060
             tcp: cng:5060
             tcp: localhost:5060
             udp: cng.local:5060
             udp: cng:5060
             udp: localhost:5060

 0(2956) init_tcp: using epoll_lt as the io watch method (auto detected)
cng at cng:/etc/ser$  0(2958) Maxfwd module- initializing
 0(2958) ERROR: fifo_server.c:857: Can't create FIFO: No such file or directory (mode=384)
 0(2958) ERROR: ctl: mod_init: init ctrl. sockets failed
 0(2958) init_mod(): Error while initializing module ctl
ERROR: error while initializing modules

It seems that it starts ok but suddenly finds an error and stops.
However if I run:

cng at cng:/etc/ser$ sudo /etc/init.d/ser start
Starting ser: serListening on
             udp: 127.0.0.1 [127.0.0.1]:5060
             udp: 10.1.3.207 [10.1.3.207]:5060
             udp: 192.168.50.10 [192.168.50.10]:5060
             tcp: 127.0.0.1 [127.0.0.1]:5060
             tcp: 10.1.3.207 [10.1.3.207]:5060
             tcp: 192.168.50.10 [192.168.50.10]:5060
Aliases:
             tcp: cng.local:5060
             tcp: cng:5060
             tcp: localhost:5060
             udp: cng.local:5060
             udp: cng:5060
             udp: localhost:5060

 0(3016) init_tcp: using epoll_lt as the io watch method (auto detected)
.
 0(3018) unable to create pid file /var/run/ser/ser.pid: No such file or directory

It only complains about the ser.pid file.

I am a little bit confused. Where is the problem?

Thanks in advance,
Rebeca Martinez
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20091223/1ec6b1cc/attachment.htm>


More information about the sr-users mailing list