[Kamailio-Users] Fwd: Binding to multiple IP addresses on the same interface.

[Geoffrey Mina]

yes it does:

[root at atl-sipgateway1 ~]# ip addr show dev eth0
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
   link/ether 00:1e:c9:b6:4c:fa brd ff:ff:ff:ff:ff:ff
   inet 67.220.XX.XX/27 brd 67.220.XX.XX scope global eth0
   inet 67.220.XX.XX/27 brd 67.220.XX.XX scope global secondary eth0:1
   inet6 fe80::21e:c9ff:feb6:4cfa/64 scope link
      valid_lft forever preferred_lft forever


On Mon, Nov 30, 2009 at 12:15 PM, Alex Hermann <alex at speakup.nl> wrote:
> On Sunday 29 November 2009 20:57:59 Geoffrey Mina wrote:
>> I have a Kamailio machine that has multiple IPs assigned to a single
>>  interface.
>>
>> eth0 = 1.2.3.4
>> eth0:1 = 1.2.3.5
>
> No idea if it has any influence on Kamailio behaviour, but those seem to be
> two interfaces as far as applications are concerned. Assigning multiple IP's
> to one interface means that for all IP's, the interface should be the same.
>
> Does 'ip addr show dev eth0' show 2 IP's?
>
> --
> Alex Hermann
>
> _______________________________________________
> Kamailio (OpenSER) - Users mailing list
> Users at lists.kamailio.org
> http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
> http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
>