[Kamailio-Users] [dispatcher] configure the sending of OPTIONS pings

Pascal Maugeri pascal.maugeri at gmail.com
Mon Oct 27 11:04:02 CET 2008


Hi

Thanks this is what I was testing right now :-)
I'm also testing the "ds_probing_mode" = 1 that recommended me Klaus.

I understand that the scenario you describe is that OPTIONS are sent when
the gw is set in "probe" mode ? I have exactly the opposite behaviour here:

modparam("dispatcher", "list_file",
"/usr/local/etc/kamailio/dispatcher.list")
modparam("dispatcher", "flags", 3)
modparam("dispatcher", "dst_avp", "$avp(i:271)")
modparam("dispatcher", "grp_avp", "$avp(i:272)")
modparam("dispatcher", "cnt_avp", "$avp(i:273)")
modparam("dispatcher", "ds_ping_method", "OPTIONS")
modparam("dispatcher", "ds_ping_interval", 3)
modparam("dispatcher", "ds_ping_from",
"sip:fend1 at 10.132.184.33<sip%3Afend1 at 10.132.184.33>
")
modparam("dispatcher", "ds_probing_threshhold", 3)
modparam("dispatcher", "ds_probing_mode", 1)

I have a simple scenario of load-balancing REGISTER and it looks to work
somehow also when I shutdown one gateway my load-balancer takes to much time
to detect it.
Does the failure-route also apply to timeout error (REGISTER messages are
not handled by the gw that is shutdown) ?

Regards,
Pascal


On Mon, Oct 27, 2008 at 10:45 AM, Carsten Bock <lists at bock.info> wrote:

> Hi,
>
> you have to add a failure-route, where you set the state to probing
> (e.g. ds_set_state("p")). If this is set 3 times
> (ds_probing_threshhold), the gateway will be longer selected from
> ds_select_domain / .._dst and will be queried with an OPTIONS-request.
> In case of a successful query, the gateway will be enabled again.
> As long as the state is active, you will not see any OPTIONS-request.
>
> Carsten
>
> Am Freitag, den 24.10.2008, 18:08 +0200 schrieb Klaus Darilion:
> > Maybe try
> > http://www.kamailio.org/docs/modules/devel/dispatcher.html#id2467955
> >
> > klaus
> >
> > Pascal Maugeri schrieb:
> > > Hi
> > >
> > > How do you configure dispatcher to send OPTIONS ping to load-balanced
> > > proxies ?
> > >
> > > I'm using kamailio 1.4.2 with this of configuration:
> > >
> > > [...]
> > > modparam("dispatcher", "ds_ping_method", "OPTIONS")
> > > modparam("dispatcher", "ds_ping_interval", 5)
> > > modparam("dispatcher", "ds_ping_from", "sip:fend1 at 10.132.184.33<sip%3Afend1 at 10.132.184.33>
> > > <mailto:sip%3Afend1 at 10.132.184.33 <sip%253Afend1 at 10.132.184.33>>")
> > > modparam("dispatcher", "ds_probing_threshhold", 3)
> > > [...]
> > >
> > > The load-balancing works properly : I see the traffic being sent to my
> > > proxies. But I don't see any SIP OPTIONS packets.
> > >
> > > I've read in module doc "This method is only available, if compiled
> with
> > > the probing of failed gateways enabled. " but I can't find how to
> > > activate this on compilation time, so I'm not sure if I have this
> > > feature or not enable.
> > >
> > > Regards,
> > > Pascal
> > >
> > >
> > >
> > >
> ------------------------------------------------------------------------
> > >
> > > _______________________________________________
> > > Users mailing list
> > > Users at lists.kamailio.org
> > > http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
> >
> > _______________________________________________
> > Users mailing list
> > Users at lists.kamailio.org
> > http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20081027/e30ca5a7/attachment.htm>


More information about the sr-users mailing list