[OpenSER-Users] Hints about to capture codes negative www_authorize??
Bogdan-Andrei Iancu
bogdan at voice-system.ro
Fri May 30 22:49:17 CEST 2008
Hi Marcio,
yes, your guess is correct - the $rc pv changes after each command you
run, so in switch() it will contain the return code of log().
Try something like:
www_authorize("rio.voip.br <http://rio.voip.br>", "subscriber");
$var(x) = $rc;
if ($rc<0) {
xlog("L_ALERT", "REGISTER ($fU)($ru) nao autorizado - Return Code
DEPOIS.0 ($var(x))\n");
switch($var(x)){
case -1:
log(1,"Invalid User\n");
.........
}
regards,
Bogdan
Marcio wrote:
> Hi,
>
> Thx for the answer, I tested and worked....but with errors...in
> relation to return codes of the Authentication's Module...
>
> In my xlite I just changed the password...should have returned the
> code (-2)...but returned the codes (-4) and (-5).....pls see below the
> log....in red
>
> ......
> May 30 15:29:28 i206529 openser[24649]: Return Code - ANTES (1)
> May 30 15:29:28 i206529 openser[24649]: REGISTER
> (12141)(sip:rio.voip.br <http://rio.voip.br>) nao autorizado - Return
> Code DEPOIS.0 (-4)
> May 30 15:29:28 i206529 openser[24649]: Enviando 401 - Unauthorized
> May 30 15:29:28 i206529 openser[24649]: Process Other Requests Here
> May 30 15:29:28 i206529 openser[24649]: REGISTER - Codigo Ret (1)
> May 30 15:29:28 i206529 openser[24649]: REGISTER
> (12141)(sip:rio.voip.br <http://rio.voip.br>) nao autorizado - Return
> Code DEPOIS.1 (1)
> May 30 15:29:28 i206529 openser[24651]: Return Code - ANTES (1)
> May 30 15:29:28 i206529 openser[24651]: REGISTER
> (12141)(sip:rio.voip.br <http://rio.voip.br>) nao autorizado - Return
> Code DEPOIS.0 (-5)
> May 30 15:29:28 i206529 openser[24651]: Enviando 401 - Unauthorized
> May 30 15:29:28 i206529 openser[24651]: Process Other Requests Here
> May 30 15:29:28 i206529 openser[24651]: REGISTER - Codigo Ret (1)
> May 30 15:29:28 i206529 openser[24651]: REGISTER
> (12141)(sip:rio.voip.br <http://rio.voip.br>) nao autorizado - Return
> Code DEPOIS.1 (1)
>
> and config script...
> ........
> if (is_method("REGISTER")) {
> xlog("L_ALERT", "Chegou um REGISTER ($fU)($ru)($retcode)\n");
> route(2);
> return;
> ........
> route[2]
> xlog("L_ALERT", "Return Code - ANTES ($rc)\n");
>
> if (!www_authorize("rio.voip.br <http://rio.voip.br>",
> "subscriber")) {
> xlog("L_ALERT", "REGISTER ($fU)($ru) nao autorizado - Return
> Code DEPOIS.0 ($rc)\n");
> log(1, "Enviando 401 - Unauthorized\n");
>
> switch($rc){
> case -1:
> log(1,"Invalid User\n");
> break;
> case -2:
> log(1, "Invalid Password\n");
> break;
> case -3:
> log(1, "Stale Nonce\n");
> break;
> case -4:
> log(1, "No Credentials\n");
> break;
> case -5:
> log(1, "Generic Error\n");
> break;
> default:
> log(1, "Process Other Requests Here\n");
> xlog("L_ALERT","REGISTER - Codigo Ret ($rc)\n");
> }
> xlog("L_ALERT", "REGISTER ($fU)($ru) nao autorizado - Return
> Code DEPOIS.1 ($rc)\n");
> www_challenge("rio.voip.br <http://rio.voip.br>", "1");
> return;
> }
> if (!check_to()) {
> ............
>
> I believe it is due to the use of the functions log() and
> xlog().....that changed the value of ($rc)....
>
> regards,
> Marcio
>
>
> 2008/5/30 Bogdan-Andrei Iancu <bogdan at voice-system.ro
> <mailto:bogdan at voice-system.ro>>:
>
> Hi Marcio,
>
> Actually, the correct pseudo variable is $retcode or $rc.
>
> See:
> http://www.openser.org/dokuwiki/doku.php/pseudovariables:1.3.x#returned_code
>
> Regards,
> Bogdan
>
> Marcio wrote:
>
> Hi.....
>
> I'm grateful for the tip but within the Openser's Config the
> variable "$retval" is not recognized....
>
> Below the log....
> ERROR:core:pv_parse_spec: error searching pvar "retval"
> May 28 08:18:57 i206529 openser: ERROR:core:pv_parse_spec:
> wrong char [
> May 28 08:18:57 i206529 openser: CRITICAL:core:yyerror: parse
> error in config file, line 385, column 12-20: unknown script
> variable
>
> and the config script...
> ............................omitted output.......................
> if (!www_authorize("rio.voip.br <http://rio.voip.br>
> <http://rio.voip.br>", "subscriber")) {
>
> xlog("L_ALERT", "REGISTER ($fU) ($ru) nao
> autorizado\n");
> log(1, "Enviando 401 - Unauthorized (Username)\n");
> # perl_exec("chkval"); # check retval but still
> not working...
> switch ($retval){
> case 1:
> log("process authentication
> success");
> break;
> case -1:
> log("Non Existent User");
> break;
> case -2:
> log("Invalid Password");
> break;
> case -3:
> log("Stale Nonce");
> break;
> case -4:
> log("No Credentials");
> break;
> default:
> log("Process Other Requests Here");
> }
> www_challenge("rio.voip.br <http://rio.voip.br>
> <http://rio.voip.br>", "1");
>
> return;
> ........................omitted output................
>
> Any hint of how I can make the Openser's config recognize the
> pvar "$retval"??
>
> regards,
> Marcio
>
> 2008/5/28 Daniel-Constantin Mierla <miconda at gmail.com
> <mailto:miconda at gmail.com> <mailto:miconda at gmail.com
> <mailto:miconda at gmail.com>>>:
>
>
> Hello,
>
>
> On 05/27/08 22:13, Marcio wrote:
>
> Hi,
>
> Who would have tips on how to capture the return codes
> negative of the function "www_authorize" ???
> I read somewhere that said to use $retval........but ...How
> can I to use it ("$retval") ??
>
> -1 - Non existent user;
> -2 - invalid passwd;
> -3 - stale nonce;
> -4 - no credentials;
> -5 - error;
>
> Any help will be greatly appreciated.
>
> one mode is with switch statement:
>
> www_authorize(...);
> switch($retval)
> {
> case -1:
> ........
> break;
> case -2:
> .......
> break;
> ....
> }
>
> http://www.openser.org/dokuwiki/doku.php/core-cookbook:devel#switch
>
> Daniel
>
> thx,
>
> Marcio
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Users mailing list
> Users at lists.openser.org
> <mailto:Users at lists.openser.org>
> <mailto:Users at lists.openser.org <mailto:Users at lists.openser.org>>
>
> http://lists.openser.org/cgi-bin/mailman/listinfo/users
>
>
> -- http://www.asipto.com
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Users mailing list
> Users at lists.openser.org <mailto:Users at lists.openser.org>
> http://lists.openser.org/cgi-bin/mailman/listinfo/users
>
>
>
>
More information about the sr-users
mailing list