[OpenSER-Users] FW: OpenSER 1.3.2-tls - error tcp_blocking_connect

[Bogdan-Andrei Iancu]

TLS uses a different port than TCP. TCP is 5060 and TLS is 5061.

Regards,
Bogdan

pravin.swami at wipro.com wrote:
> Hi  Bogdan-Andrei Iancu,
>
> Thanks for your reply .
>                  
> When Sending a INVITE request without (no-TLS)  proxy establishes TCP
> connection successfully & call Succeeds.
> But, when tried INVITE  with (TLS) proxy fails to establish TCP
> connection & get the below error.
>
> Am I missing something??
> Is there any configurable parameter which has to be used in ser.cfg
>
> Regards,
> Pravin.swami
>
>
>  
>
>
> -----Original Message-----
> From: Bogdan-Andrei Iancu [mailto:bogdan at voice-system.ro] 
> Sent: Monday, July 14, 2008 2:02 PM
> To: Pravin Sidram swami (WT01 - MCE-Mobile Devices)
> Cc: users at lists.openser.org
> Subject: Re: [OpenSER-Users] FW: OpenSER 1.3.2-tls - error
> tcp_blocking_connect
>
> Hi,
>
> The error message specks for it self :
>     Connection refused
>
> So, your OpenSER tried to open a TCP/TLS connection to an address where
> nobody was listening.
>
> Regards,
> Bogdan
>
>
> pravin.swami at wipro.com wrote:
>   
>>  
>> Hi... All ,
>>  
>> I have Configured OpenSER 1.3.2-tls   source code & compiled 
>> successfully .
>>  
>> Registration is  successful with TLS handshake .
>>  
>> Below is the scenario of my test .
>>  
>> UA1 & UA2  clients Registers on TLS.
>>  
>> When UA1 send INVITE request to UA2
>>  
>> I got the Following Error :
>>  
>>  : SIP/2.0 477 Send failed (477/TM)
>>  
>> When i scanned through the logs of openser I got the following Message
>>     
>
>   
>> : proxy always trying to establish TCP connection but it Fails.
>>  
>> Jul 11 23:55:20 [22415] DBG:core:check_via_address: params 
>> 10.200.68.220, 10.200.68.220, 0 Jul 11 23:55:20 [22415] 
>> DBG:core:tcp_send: no open tcp connection found, opening new one Jul 
>> 11 23:55:20 [22415] ERROR:core:tcp_blocking_connect: poll error:
>> flags 18
>> Jul 11 23:55:20 [22415] ERROR:core:tcp_blocking_connect: failed to 
>> retrieve SO_ERROR (111) Connection refused Jul 11 23:55:20 [22415] 
>> ERROR:core:tcpconn_connect:
>> tcp_blocking_connect failed
>> Jul 11 23:55:20 [22415] ERROR:core:tcp_send: connect failed Jul 11 
>> 23:55:20 [22415] ERROR:tm:msg_send: tcp_send failed Jul 11 23:55:20 
>> [22415] ERROR:tm:t_forward_nonack: sending request failed Jul 11 
>> 23:55:20 [22415] DBG:tm:t_relay_to: t_forward_nonack returned error 
>> Jul 11 23:55:20 [22415] DBG:core:parse_headers: flags=ffffffffffffffff
>>     
>
>   
>> Jul 11 23:55:20 [22415] DBG:core:check_via_address: params 
>> 10.200.68.220, 10.200.68.220, 0 Jul 11 23:55:20 [22415] 
>> DBG:tm:run_trans_callbacks: trans=0xb5db7e50, callback type 128, id 0 
>> entered
>> ACC: call missed: 
>> timestamp=1215800720;method=INVITE;from_tag=20282693445eido3yklvo4;to_
>> tag=;call_id=8307080595eido3erlzgw;code=477;reason=Request
>> Failure
>>  
>>                   - Presently i don't have any DNS server , is that 
>> really matters ??
>>                   - While openser tries to open TCP connection with 
>> UAS it's sending port ' 0 '  , but fails  is it ok .?? , or Anything 
>> I'm missing in Configuration .
>>                    I have Attahced config file Also.
>>  
>> Thanks & Regards,
>> Pravin.swami
>>
>>