[Serusers] SER/FIFO not accessible

Steve B. sbelt at browsermedia.com
Thu Jan 31 05:56:34 CET 2008


I am new to SER. I have installed SER 0.9.6-2 on a fresh Kubuntu server using apt. I have been able 
to get SER to run using the sample ser.cfg files (only changing module paths from /usr/local/lib... 
to /usr/lib/...).

I am trying to setup the mysql support. In a nutshell, when I run serctl I get an error:

# serctl add sbelt at ser.mytestsite.com sbelt sbelt at mytestsite.com
MySql password: (here I enter 42serro11)
error: SER/FIFO not accessible: 2
#

Am I using the correct password? I am not sure which Mysql Password is being requested here. I have 
also tried the mysql root password with the same result.

I have seen other posts similar that seem to indicate it is permissions on the /tmp directory. I 
tried adding to ser.cfg fifo_mode=0777. I have verified the current user can write to the /tmp 
directory. Frankly, I do not know if this /tmp/ser_fifo is all a red herring.

Thanks for any help on how I can figure out what I am doing wrong.

Steve B.

Here is my ser.cfg


# $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $
#
# simple quick-start config script
#

# ----------- global configuration parameters ------------------------

debug=3
fork=no
log_stderror=yes

listen=192.168.32.103           # put your server IP address here
port=5060
children=4

dns=no
rev_dns=no
fifo="/tmp/ser_fifo"
fifo_mode=0777
fifo_db_url="mysql://serro:47serro11@localhost/ser"

loadmodule "/usr/lib/ser/modules/mysql.so"
loadmodule "/usr/lib/ser/modules/sl.so"
loadmodule "/usr/lib/ser/modules/tm.so"
loadmodule "/usr/lib/ser/modules/rr.so"
loadmodule "/usr/lib/ser/modules/maxfwd.so"
loadmodule "/usr/lib/ser/modules/usrloc.so"
loadmodule "/usr/lib/ser/modules/registrar.so"
loadmodule "/usr/lib/ser/modules/uri_db.so"
loadmodule "/usr/lib/ser/modules/auth.so"
loadmodule "/usr/lib/ser/modules/auth_db.so"

modparam("auth_db|uri_db|usrloc", "db_url", "mysql://serro:47serro11@localhost/ser")
modparam("auth_db", "calculate_ha1", 1)
modparam("auth_db", "password_column", "password")
modparam("usrloc", "db_mode", 2)
modparam("rr", "enable_full_lr", 1)

route {

         # -----------------------------------------------------------------
         # Sanity Check Section
         # -----------------------------------------------------------------
         if (!mf_process_maxfwd_header("10")) {
                 sl_send_reply("483", "Too Many Hops");
                 break;
         };


         if (msg:len > max_len) {
                 sl_send_reply("513", "Message Overflow");
                 break;
         };

         # -----------------------------------------------------------------
         # Record Route Section
         # -----------------------------------------------------------------
         if (method!="REGISTER") {
                 record_route();
         };

         # -----------------------------------------------------------------
         # Loose Route Section
         # -----------------------------------------------------------------
         if (loose_route()) {
                 route(1);
                 break;
         };

         # -----------------------------------------------------------------
         # Call Type Processing Section
         # -----------------------------------------------------------------
         if (uri!=myself) {
                 route(1);
                 break;
         };

         if (method=="ACK") {
                 route(1);
                 break;
         } else if (method=="INVITE") {
                 route(3);
                 break;
         } else  if (method=="REGISTER") {
                 route(2);
                 break;
         };

         lookup("aliases");
         if (uri!=myself) {
                 route(1);
                 break;
         };


         if (!lookup("location")) {
                 sl_send_reply("404", "User Not Found");
                 break;
         };

         route(1);
}

route[1] {

         # -----------------------------------------------------------------
         # Default Message Handler
         # -----------------------------------------------------------------
         if (!t_relay()) {
                 sl_reply_error();
         };
}

route[2] {

         # -----------------------------------------------------------------
         # REGISTER Message Handler
         # ----------------------------------------------------------------
         sl_send_reply("100", "Trying");

         if (!www_authorize("","subscriber")) {
                 www_challenge("","0");
                 break;
         };

         if (!check_to()) {
                 sl_send_reply("401", "Unauthorized");
                 break;
         };

         consume_credentials();

         if (!save("location")) {
                 sl_reply_error();
         };
}

route[3] {
         # -----------------------------------------------------------------
         # INVITE Message Handler
         # -----------------------------------------------------------------
         if (!proxy_authorize("","subscriber")) {
                 proxy_challenge("","0");
                 break;
         } else if (!check_from()) {
                 sl_send_reply("403", "Use From=ID");
                 break;
         };

         consume_credentials();

         lookup("aliases");
         if (uri!=myself) {
                 route(1);
                 break;
         };

         if (!lookup("location")) {
                 sl_send_reply("404", "User Not Found");
                 break;
         };

         route(1);
}





More information about the sr-users mailing list