[Serusers] problem error SER

[Atle Samuelsen]

Hi Bimantara,

The reason why you get this problem. is that the server you are trying
to run ser on, has alreaddy a process that is useing port 5060 for the
ip 10.14.200.101. 

Either check what is running on port 5060, Or change ser to run on a
different port.

A other way, could be to only listen to the ip 10.14.200.95 on port
5060. 

Best Regards

Atle

* Bimantara Jayadiputro <bim1601 at gmail.com> [080812 09:03]:
> hello sir
> i'm bimbim, student from indonesia
> now i'm trying to finish my final project
> my final project is about SER
> i have trouble with that
> when i start /etc/init.d/ser start there is an error with assigning addres
> below is the configuration of my ser
> 
> ------------------------------------------------------------------------------------------------------------------------
> cnc9 at cnc9-desktop:/var/run/ser$ sudo /etc/init.d/ser start
> Starting ser: serListening on
>              udp: 10.14.200.95 [10.14.200.95]:5060
>              udp: 2001:660:4701:1:0:0:0:1 [2001:660:4701:1:0:0:0:1]:5060
>              udp: sip4.sipv6.net [10.14.200.101]:5060
>              udp: sip6.sipv6.net [2001:660:4701:1:0:0:0:2]:5060
>              tcp: 10.14.200.95 [10.14.200.95]:5060
>              tcp: 2001:660:4701:1:0:0:0:1 [2001:660:4701:1:0:0:0:1]:5060
>              tcp: sip4.sipv6.net [10.14.200.101]:5060
>              tcp: sip6.sipv6.net [2001:660:4701:1:0:0:0:2]:5060
> Aliases:
>              tcp: localhost:5060
>              tcp: cnc9-desktop.local:5060
>              udp: localhost:5060
>              udp: cnc9-desktop.local:5060
> 
> stateless - initializing
>  0(0) .
> cnc9 at cnc9-desktop:/var/run/ser$ Maxfwd module- initializing
> textops - initializing
>  0(0) INFO: udp_init: SO_RCVBUF is initially 109568
>  0(0) INFO: udp_init: SO_RCVBUF is finally 219136
>  0(0) INFO: udp_init: SO_RCVBUF is initially 109568
>  0(0) INFO: udp_init: SO_RCVBUF is finally 219136
>  0(0) INFO: udp_init: SO_RCVBUF is initially 109568
>  0(0) INFO: udp_init: SO_RCVBUF is finally 219136
> * 0(0) ERROR: udp_init: bind(6, 0x80f8d7c, 16) on 10.14.200.101: Cannot
> assign requested address*
> 
> ------------------------------------------------------------------------------------------------------------------------
> 
> i also attached my ser.cfg
> 
> i hope you can help me resolve this problem
> thank you


> _______________________________________________
> Serusers mailing list
> Serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers