[Kamailio-Users] Authentication problems.
Buzukelis
buzukelis at gmail.com
Wed Aug 6 13:48:52 CEST 2008
*Hi all,
** I'm trying to register few ata's to openser.*
*i puted two registrations to subscribers table.*
*but registaration allwais unauthorized.*
**
**
*ngrep output: *
*interface: eth0 (192.168.27.0/255.255.255.0)
filter: (ip) and ( port 5060 )*
*U 192.168.27.117:10186 -> 192.168.27.201:5060
REGISTER sip:192.168.27.201 SIP/2.0.
Via: SIP/2.0/UDP 192.168.27.117:10186;branch=z9hG4bK645148049;rport.
From: <sip:1000 at 192.168.27.201 <sip%3A1000 at 192.168.27.201>>;tag=604945105.
To: <sip:1000 at 192.168.27.201 <sip%3A1000 at 192.168.27.201>>.
Call-ID: 53873712-10186-1 at 192.168.27.117.
CSeq: 2000 REGISTER.
Contact: *.
Max-Forwards: 70.
User-Agent: Grandstream HT-502 V1.0B 1.0.1.8.
Expires: 0.
Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, SUBSCRIBE, NOTIFY, INFO, REFER,
UPDATE.
Content-Length: 0.
.*
*
U 192.168.27.201:5060 -> 192.168.27.117:10186
SIP/2.0 401 Unauthorized.
Via: SIP/2.0/UDP 192.168.27.117:10186;branch=z9hG4bK645148049;rport=10186.
From: <sip:1000 at 192.168.27.201 <sip%3A1000 at 192.168.27.201>>;tag=604945105.
To: <sip:1000 at 192.168.27.201 <sip%3A1000 at 192.168.27.201>
>;tag=329cfeaa6ded039da25ff8cbb8668bd2.b963.
Call-ID: 53873712-10186-1 at 192.168.27.117.
CSeq: 2000 REGISTER.
WWW-Authenticate: Digest realm="192.168.27.201",
nonce="48998a3ba4544026eab5a8f7cf93dc258a5d26d7".
Server: OpenSER (1.3.2-notls (i386/linux)).
Content-Length: 0.
.
U 192.168.27.117:10186 -> 192.168.27.201:5060
REGISTER sip:192.168.27.201 SIP/2.0.
Via: SIP/2.0/UDP 192.168.27.117:10186;branch=z9hG4bK142179605;rport.
From: <sip:1000 at 192.168.27.201 <sip%3A1000 at 192.168.27.201>>;tag=604945105.
To: <sip:1000 at 192.168.27.201 <sip%3A1000 at 192.168.27.201>>.
Call-ID: 53873712-10186-1 at 192.168.27.117.
CSeq: 2001 REGISTER.
Contact: *.
Authorization: Digest username="1000", realm="192.168.27.201",
nonce="48998a3ba4544026eab5a8f7cf93dc258a5d26d7", uri="sip:19$
Max-Forwards: 70.
User-Agent: Grandstream HT-502 V1.0B 1.0.1.8.
Expires: 0.
Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, SUBSCRIBE, NOTIFY, INFO, REFER,
UPDATE.
Content-Length: 0.
.
U 192.168.27.201:5060 -> 192.168.27.117:10186
SIP/2.0 401 Unauthorized.
Via: SIP/2.0/UDP 192.168.27.117:10186;branch=z9hG4bK142179605;rport=10186.
From: <sip:1000 at 192.168.27.201 <sip%3A1000 at 192.168.27.201>>;tag=604945105.
To: <sip:1000 at 192.168.27.201 <sip%3A1000 at 192.168.27.201>
>;tag=329cfeaa6ded039da25ff8cbb8668bd2.3c26.
Call-ID: 53873712-10186-1 at 192.168.27.117.
CSeq: 2001 REGISTER.
WWW-Authenticate: Digest realm="192.168.27.201",
nonce="48998a3ba4544026eab5a8f7cf93dc258a5d26d7".
Server: OpenSER (1.3.2-notls (i386/linux)).
Content-Length: 0.
openser.cfg
:#
# $Id: openser.cfg 1676 2007-02-21 13:16:34Z bogdan_iancu $
#
# simple quick-start config script
# Please refer to the Core CookBook at
http://www.openser.org/dokuwiki/doku.php
# for a explanation of possible statements, functions and parameters.
#
# ----------- global configuration parameters ------------------------
debug=3 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no # (cmd line: -E)
children=4
# Uncomment these lines to enter debugging mode
#fork=no
#log_stderror=yes
#
port=5060
# ------------------ module loading ----------------------------------
#set module path
mpath="//lib/openser/modules/"
# Uncomment this if you want to use SQL database
loadmodule "mysql.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "mi_fifo.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "auth.so"
loadmodule "auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- mi_fifo params --
modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo")
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
};
if (msg:len >= 2048 ) {
sl_send_reply("513", "Message too big");
exit;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
if (!method=="REGISTER")
record_route();
# subsequent messages withing a dialog should take the
# path determined by record-routing
if (loose_route()) {
# mark routing logic in request
append_hf("P-hint: rr-enforced\r\n");
route(1);
};
if (!uri==myself) {
# mark routing logic in request
append_hf("P-hint: outbound\r\n");
# if you have some interdomain connections via TLS
#if(uri=~"@tls_domain1.net") {
# t_relay("tls:domain1.net");
# exit;
#} else if(uri=~"@tls_domain2.net") {
# t_relay("tls:domain2.net");
# exit;
#}
route(1);
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest.
if (!www_authorize("", "subscriber")) {
www_challenge("", "0");
exit;
};
save("location");
exit;
};
if (!proxy_authorize("","subscriber")) {
proxy_challenge("","0");
exit;
};
consume_credentials();
lookup("aliases");
if (!uri==myself) {
append_hf("P-hint: outbound alias\r\n");
route(1);
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
exit;
};
append_hf("P-hint: usrloc applied\r\n");
};
route(1);
}
route[1] {
# send it out now; use stateful forwarding as it works reliably
# even for UDP2TCP
if (!t_relay()) {
sl_reply_error();
};
exit;
}
can not understand why this configuration is not working to me???
any help will be apreciated.
*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20080806/d56a89d3/attachment.htm>
More information about the sr-users
mailing list