[OpenSER-Users] SIGILL when starting openser

Bogdan-Andrei Iancu bogdan at voice-system.ro
Wed Apr 23 15:48:02 CEST 2008


Hi Christian,

Any logs from openser during startup? if not, try to enable debug 
(debug=6) and see where is stops.

Regards,
Bogdan

Christian Koch wrote:
> Hi,
>
> when starting openser 1.3.1 it doesn't really start, but stops after 
> processing a SIGILL. When perfoming
>
> strace -f /usr/local/sbin/openser
>
> I get the following output (these are only the last few lines):
>
>     time([1208951399])                      = 1208951399
>     stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=837, ...}) = 0
>     stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=837, ...}) = 0
>     stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=837, ...}) = 0
>     send(3, "<143>Apr 23 13:49:59 /usr/local/"..., 147, MSG_NOSIGNAL) = 147
>     --- SIGILL (Illegal instruction) @ 0 (0) ---
>     Process 12746 detached
>
>
> I've compiled openser from source on the same machine. When starting 
> openser with -V everything works just fine. Output:
>
>     version: openser 1.3.1-notls (i386/linux)
>     flags: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST,
>     SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT
>     ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN
>     16, MAX_URI_SIZE 1024, BUF_SIZE 65535
>     poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
>     svnrevision: unknown
>     @(#) $Id: main.c 3590 2008-01-28 17:46:56Z bogdan_iancu $
>     main.c compiled on 10:47:24 Apr 23 2008 with gcc 3.4.5
>
>
>
> So I guessed the problem could occur inside a module. I removed auth.so 
> and auth_db.so from my config file, but openser still doesn't start. 
> But, it doesn't receive a SIGILL anymore, but SIGTERM.  Output from strace:
>
>     time([1208951661])                      = 1208951661
>     stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=837, ...}) = 0
>     stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=837, ...}) = 0
>     stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=837, ...}) = 0
>     send(3, "<139>Apr 23 13:54:21 /usr/local/"..., 103, MSG_NOSIGNAL) = 103
>     kill(0, SIGTERM)                        = 0
>     --- SIGTERM (Terminated) @ 0 (0) ---
>     sigreturn()                             = ? (mask now [])
>     time([1208951661])                      = 1208951661
>     stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=837, ...}) = 0
>
>     [...]
>
>     stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=837, ...}) = 0
>     stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=837, ...}) = 0
>     stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=837, ...}) = 0
>     send(3, "<143>Apr 23 13:54:21 /usr/local/"..., 113, MSG_NOSIGNAL) = 113
>     munmap(0xb5f58000, 33554432)            = 0
>     exit_group(-1)                          = ?
>     Process 12752 detached
>
> Any ideas how to fix this problem?
>
> Thx,
> Christian
>
>
> _______________________________________________
> Users mailing list
> Users at lists.openser.org
> http://lists.openser.org/cgi-bin/mailman/listinfo/users
>
>   





More information about the sr-users mailing list