[Serusers] SER+Mediaproxy + X-LITE in the same LAN.
pistara_bros at tin.it
pistara_bros at tin.it
Fri Sep 14 18:39:31 CEST 2007
Hi all, i'm newbie in SER,
I want to route RTP packets between 2
computers with x-lite client voip
in the same network through
Mediaproxy. I know this may have
no sense, but it's just a test
configuration.
The call use_media_proxy() seems to have no effect,
the
RTP packets go directly from one computer to
another, no packet trough
Mediaproxy.
This is my environment:
SER and Mediaproxy on the same PC
(192.168.123.186)
X-lite client_A running on 192.168.123.10
X-lite
client_B running on 192.168.123.168
Client_A call Client_B that accept,
but mediaproxy refuses to
proxy the call.
This is my ser.cfg
#
----------- global configuration parameters ------------------------
debug=3 # debug level
listen=192.168.123.186
port=5060
log_facility=LOG_LOCAL6
fork=no
log_stderror=yes
check_via=no #
(cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no #
(cmd. line: -R)
fifo="/tmp/ser_fifo"
fifo_db_url="mysql://ser:
heslo at localhost/ser"
# ------------------ module loading
----------------------------------
loadmodule
"/usr/local1/lib/ser/modules/mysql.so"
loadmodule
"/usr/local1/lib/ser/modules/sl.so"
loadmodule
"/usr/local1/lib/ser/modules/tm.so"
loadmodule
"/usr/local1/lib/ser/modules/rr.so"
loadmodule
"/usr/local1/lib/ser/modules/maxfwd.so"
loadmodule
"/usr/local1/lib/ser/modules/usrloc.so"
loadmodule
"/usr/local1/lib/ser/modules/registrar.so"
loadmodule
"/usr/local1/lib/ser/modules/textops.so"
loadmodule
"/usr/local1/lib/ser/modules/uri.so"
loadmodule
"/usr/local1/lib/ser/modules/uri_db.so"
loadmodule
"/usr/local1/lib/ser/modules/domain.so"
loadmodule
"/usr/local1/lib/ser/modules/auth.so"
loadmodule
"/usr/local1/lib/ser/modules/auth_db.so"
#MEDIA PROXY module needed
loadmodule "/usr/local1/lib/ser/modules/mediaproxy.so"
loadmodule
"/usr/local1/lib/ser/modules/nathelper.so"
# ----------------- setting
module-specific parameters ---------------
# -- usrloc params --
modparam("usrloc", "db_mode", 2)
# -- auth params --
modparam
("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1"
parameter to yes (which true in this config),
# uncomment also the
following parameter)
#
modparam("auth_db", "password_column",
"password")
#SQL settings
modparam("auth_db", "db_url", "mysql://ser:
heslo at localhost/ser")
modparam("usrloc", "db_url", "mysql://ser:
heslo at localhost/ser")
#MEDIAPROXY settings
#---------------------------
# configurazione moduli
#---------------------------
modparam("nathelper", "rtpproxy_disable",
1)
modparam("nathelper", "natping_interval", 0)
modparam("mediaproxy","
natping_interval", 30)
modparam("mediaproxy","mediaproxy_socket","
/var/run/mediaproxy.sock")
modparam("mediaproxy","sip_asymmetrics","
/usr/local1/etc/ser/sip-clients")
modparam("mediaproxy","
rtp_asymmetrics","/usr/local1/etc/ser/rtp-clients")
modparam
("registrar", "nat_flag", 6)
# -- rr params --
# add value to ;lr
param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks --
messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (msg:len >= 2048 ) {
sl_send_reply("513",
"Message too big");
break;
};
# we
record-route all messages -- to make sure that
# subsequent
messages will go through our proxy; that's
# particularly good
if upstream and downstream entities
# use different transport
protocol
#if (method=="INVITE" && client_nat_test("3")) {
# record_route_preset("192.168.123.186:5060;nat=yes");
#} else if (method!="REGISTER") {
#
record_route();
#};
if (method=="INVITE" ) {
if (client_nat_test("3")) {
record_route_preset("192.168.123.186:5060;
nat=yes");
} else record_route_preset
("192.168.123.186");
}
else if (method!="REGISTER") {
record_route();
};
if (method=="
BYE" || method=="CANCEL") {
end_media_session();
};
# subsequent messages withing a dialog should take
the
# path determined by record-routing
#
-----------------------------------------------------------------
# Loose Route Section
#
-----------------------------------------------------------------
if (loose_route()) {
if ((method=="INVITE" ||
method=="REFER") && !has_totag()) {
sl_send_reply("403", "Forbidden");
break;
};
if (method=="INVITE") {
if (!proxy_authorize("","subscriber")) {
proxy_challenge("","0");
break;
} else
if (!check_from()) {
sl_send_reply
("403", "Use From=ID");
break;
};
consume_credentials();
if (client_nat_test("3")
|| search("^Route:.*;nat=yes")) {
setflag(6);
use_media_proxy();
};
};
route(1);
break;
};
if (!uri==myself) {
route(4);
route(1);
break;
};
# if the request is for other domain use
UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if
(uri==myself) {
if (method=="ACK") {
route(1);
break;
} else if (method=="CANCEL") {
route(1);
break;
} else if
(method=="INVITE") {
route(3);
break;
} else if (method=="
REGISTER") {
route(2);
break;
};
lookup("aliases");
if (uri!=myself) {
route(4);
route(1);
break;
};
if (!lookup("location")) {
sl_send_reply("404", "User Not Found");
break;
};
};
append_hf("P-hint: usrloc applied\r\n");
route(1);
}
route[1]
{
# send it out now; use stateful forwarding as it works
reliably
# even for UDP2TCP
t_on_reply("1");
if
(!t_relay()) {
if (method=="INVITE" || method=="ACK") {
end_media_session();
};
sl_reply_error();
};
}
route[2] {
#
-----------------------------------------------------------------
# REGISTER Message Handler
#
----------------------------------------------------------------
sl_send_reply("100", "Trying");
if (!search("^Contact:
[ ]*\*") && client_nat_test("7")) {
setflag(6);
fix_nated_register();
force_rport();
};
if (!www_authorize("","subscriber")) {
www_challenge("","0");
break;
};
if (!check_to()) {
sl_send_reply("401",
"Unauthorized");
break;
};
consume_credentials();
if (!save("location")) {
sl_reply_error();
};
}
route[3] {
#
-----------------------------------------------------------------
# INVITE Message Handler
#
-----------------------------------------------------------------
if (client_nat_test("3")) {
setflag(7);
force_rport();
fix_nated_contact();
};
if (!proxy_authorize("","subscriber")) {
proxy_challenge("","0");
break;
} else if (!check_from()) {
sl_send_reply("403", "Use
From=ID");
break;
};
consume_credentials();
lookup("aliases");
if (uri!
=myself) {
route(4);
route(1);
break;
};
if (!lookup("location")) {
sl_send_reply("404", "User Not Found");
break;
};
route(4);
route(1);
}
route[4] {
#
-----------------------------------------------------------------
# NAT Traversal Section
#
-----------------------------------------------------------------
if (isflagset(6) || isflagset(7)) {
if (!
isflagset(8)) {
setflag(8);
use_media_proxy();
};
};
}
onreply_route[1] {
if ((isflagset(6) || isflagset(7)) &&
(status=~"(180)|(183)|2[0-9][0-9]")) {
if (!search
("^Content-Length:[ ]*0")) {
use_media_proxy();
};
};
if (client_nat_test("1")) {
fix_nated_contact();
};
}
And this is
Mediaproxy Log:
Listening for commands on local socket
`/var/run/mediaproxy.sock'
Listening for remote commands on `192.
168.123.186:25060'
Remote commands are allowed from: 192.168.123.186,
127.0.0.1
Using IP address `192.168.123.186' for the RTP/RTCP proxy
request B390Opu7cB 192.168.123.168:25500:audio 192.168.123.168 sip.
antech.it local 192.168.123.186 remote unknown-agent info=from:
orazio at sip.antech.it,to:j2me at sip.antech.it,
fromtag:As94,totag:
session
B390Opu7cB: started. listening on 192.168.123.186:52010
execution
time: 1.71 ms
lookup B390Opu7cB 192.168.123.186:25500:audio
192.168.123.186 sip.antech.it local sip.antech.it unknown unknown-agent
info=from:orazio at sip.antech.it,to:j2me at sip.antech.it,fr
omtag:As94,
totag:oePf
execution time: 0.57 ms
session B390Opu7cB: caller signed
in from 192.168.123.168:25500 (RTP) (will return to 192.168.123.168:
25500)
status
execution time: 0.14 ms
session B390Opu7cB: 2/0/0
packets, 344/0/0 bytes (caller/called/relayed)
session B390Opu7cB:
ended (did timeout).
delete B390Opu7cB info=
execution time: 0.14 ms
and this is dump of session.py
[root at sip mediaproxy]# ./sessions.py
Caller Via Called Status
Duration Codec Type Traffic
----------------------------------------------------------------------------------------------------
192.168.123.168:25500 - 192.168.123.186:52010 - ?.?.?.?:? inactive
0'32" GSM Audio 344/0/0
Total traffic: 0bps/0bps/0bps
(in1/in2/out)
Session count: 1
Proxy version: 1.9.0
Is mediaproxy
working just between different networks
or it's an error in my
configuration file?
Please help me. Any suggestions?
Orazio
More information about the sr-users
mailing list