[OpenSER-Users] Re: Openser SVN trunk and RtpProxy 0.3-2

[Iñaki Baz Castillo]

El Miércoles, 24 de Octubre de 2007, Iñaki Baz Castillo escribió:
> Hi, after upgrading to OpenSer SVN trunk the conexion with RtpProxy (0.3-2
> in Debian Sid) gives an error:
>
> ERROR:nathelper:send_rtpp_command: can't send command to a RTP proxy
> ERROR:nathelper:send_rtpp_command: proxy <udp:localhost:22222> does not
> respond, disable it
> WARNING:nathelper:rtpp_test: can't get version of the RTP proxy
> WARNING:nathelper:rtpp_test: support for RTP proxy <udp:localhost:22222>
> has been disabled temporarily
>
> Do I need a latest version of RtpProxy? which version exactly?

In fact I don't see newer versions of RtpProxy.

I know that the error above is the same as if I set a wrong port or IP, but 
it's not my case. My conf worked fine before upgrading OpenSer.


~# openserctl fifo nh_show_rtpp
200 OK
udp:localhost:22222::  set=0
        disabled:: 0
        weight:: 1
        recheck_ticks:: 60



This is my conf:

- Openser SVN trunk (from today)
modparam("nathelper", "received_avp", "$avp(i:42)")
modparam("nathelper", "sipping_method", "OPTIONS")
modparam("nathelper", "natping_interval", 20)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "sipping_bflag", 7)
modparam("nathelper", "sipping_from", "sip:openser at openser.domain.org")
modparam("nathelper", "rtpproxy_sock", "udp:localhost:22222")


RtpProxy runs as:

~# rtpproxy -f -l 0.0.0.0 -s udp:127.0.0.1:22222



I restart OpenSer and get:

  ERROR:nathelper:send_rtpp_command: can't send command to a RTP proxy
  ERROR:nathelper:send_rtpp_command: proxy <udp:localhost:22222> does not
    respond, disable it
  WARNING:nathelper:rtpp_test: can't get version of the RTP proxy
  WARNING:nathelper:rtpp_test: support for RTP proxy <udp:localhost:22222>
    has been disabled temporarily


ngrep in port 22222 says:

~# ngrep -d any -P ' ' -W byline -T -t "$*" port 22222
interface: any
filter: (ip or ip6) and ( port 22222 )

#
U 2007/10/24 14:34:10.557619 127.0.0.1:53545 -> 127.0.0.1:22222
5851_0 V
#
U 2007/10/24 14:34:10.557962 127.0.0.1:22222 -> 127.0.0.1:53545
5851_0 20040107

#
U 2007/10/24 14:34:10.558152 127.0.0.1:53545 -> 127.0.0.1:22222
5851_1 VF 20050322
#
U 2007/10/24 14:34:10.558186 127.0.0.1:22222 -> 127.0.0.1:53545
5851_1 1

#
U 2007/10/24 14:34:10.560929 127.0.0.1:53546 -> 127.0.0.1:22222
5852_0 V
#
U 2007/10/24 14:34:10.562735 127.0.0.1:53547 -> 127.0.0.1:22222
5853_0 V
#
U 2007/10/24 14:34:10.564556 127.0.0.1:53548 -> 127.0.0.1:22222
5854_0 V
...



Any help please? I don't see any new mandatory parameter or similar in module 
doc, what can be wrong if it worked with OpenSer 1.2.2?

Thanks for any help.


-- 
Iñaki Baz Castillo