[OpenSER-Users] REGISTER Invalid Cseq Number

[tele]

Hi Norm,

Thanks for reporting it. But i think like bogdan the vendor should check
their SIP implementation =)

:tele

On Tue, 2007-10-09 at 07:57 -0400, Norman Brandinger wrote:
> Tele:
> 
> I've run across similar problems with older sipura ata's and phones.  It
> seemed the problem started when multiple phones were behind the same NAT
> and were using the same default port settings.  Changing the port from
> say 5060/5061 to 5065/5066 for lines 1/2 of the second phone appeared to
> resolve this issue.
> 
> Regards,
> Norm
> 
> tele wrote:
> > Hi,
> >
> > Thank you bogdan, i will contact the Vendor.
> >
> > bye
> >
> > :tele
> >
> > On Tue, 2007-10-09 at 14:31 +0300, Bogdan-Andrei Iancu wrote:
> >   
> >> Hi Tele,
> >>
> >> 0 value disable the retransmission detection (same cseq), so it is the 
> >> opposite of what you are trying to do.
> >>
> >> I think the fix should be in the device (as it breaks the RFC) and not 
> >> in openser.
> >>
> >> regards,
> >> bogdan
> >>
> >> tele wrote:
> >>     
> >>> Hi all,
> >>>
> >>> I've a problem with a CPE/IAD that sometimes send a REGISTER with same
> >>> Cseq in the location entry, OpenSER response is "400 Bad Request" with
> >>> P-Registrar-Error: Invalid CSeq number. This causes the CPE/IAD to
> >>> disable the voice port.
> >>>
> >>> I want disable this kind of check, i've try to set the
> >>> modparam("usrloc", "cseq_delay", 0) for disable retrasmission check but
> >>> doesn't work
> >>>
> >>> Any other idea to solve this? i've this problem with only this CPE.
> >>>
> >>> Thanks!
> >>>
> >>> :tele
> >>>
> >>>
> >>>
> >>>
> >>> _______________________________________________
> >>> Users mailing list
> >>> Users at openser.org
> >>> http://openser.org/cgi-bin/mailman/listinfo/users
> >>>
> >>>   
> >>>       
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users at openser.org
> > http://openser.org/cgi-bin/mailman/listinfo/users
> >
> >
> >   
>