[OpenSER-Users] Re: can't get code for the src-leg attribute
Live Great
livegreat007 at yahoo.com
Wed Oct 3 01:34:49 CEST 2007
Hi Norman,
Thanks for the reply.
According to your suggestion, I have added the following lines in raddb/dicitionary:
ATTRIBUTE Src-Leg 1075 integer
ATTRIBUTE Dst-Leg 1076 integer
change in radiusclient-ng/dictionary:
ATTRIBUTE Src-Leg 1075 integer
ATTRIBUTE Dst-Leg 1076 integer
change in openser/openser.cfg:
#modparam("acc", "multi_leg_info", "src_leg=$avp(i:901);dst_leg=$avp(i:902)")
modparam("acc", "multi_leg_info", "Src-Leg=$avp(i:901);Dst-Leg=$avp(i:902)")
Note, I have commented out the original src_leg/dst_leg definition.
I don't know what is that i:901 and i:902 means, so I simply change the first letter to upper case and change "_" to "-".
Restarted radiusd, and try to start openser then found the following error in the /var/log/messages file:
ERROR:acc:extra2int: <Src-Leg> is not a number
When I started radiusd, there are info messages written to /var/log/radiusd.log file:
Wed Oct 3 09:28:45 2007 : Info: Using deprecated naslist file. Support for this will go away soon.
Wed Oct 3 09:28:45 2007 : Info: rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Wed Oct 3 09:28:45 2007 : Info: Ready to process requests.
Thanks
Sam
----- Original Message ----
From: Norman Brandinger <norm at goes.com>
To: Live Great <livegreat007 at yahoo.com>
Cc: users at openser.org
Sent: Wednesday, October 3, 2007 3:26:40 AM
Subject: Re: can't get code for the Failed attribute
Hi Sam,
If you altered the dictionary entries, you MUST make sure that your
openser.cfg, has also been updated.
For example:
modparam("acc", "radius_extra", "Src-Leg=$avp(s:source_leg);
Dst-Leg=$avp(s:destination_leg)")
Note that Src-Leg and Dst-Leg MUST be in the dictionary for BOTH
radiusclient-ng AND radiusd.
Regards,
Norm
Live Great wrote:
> Hi,
>
> In your example, do you meant openser will trainsform Src-Leg to
> src_leg and Dst-Leg to dst_leg?
> After I followed your suggestion and changed the definition to,
> ATTRIBUTE Src-Leg 1075 string
> ATTRIBUTE Dst-Leg 1076 string
>
> I get an error:
> ERROR: acc: can't get code for the src_leg attribute
>
> I have a feeling that it is case sensitive, and openser is looking for
> src_leg instead Src-Leg.
>
> Thanks
> Sam.
>
>
> ----- Original Message ----
> From: Norman Brandinger <norm at goes.com>
> To: Live Great <livegreat007 at yahoo.com>
> Cc: users at openser.org
> Sent: Tuesday, October 2, 2007 9:42:15 PM
> Subject: Re: can't get code for the Failed attribute
>
> Hello Sam,
>
> The definition you used:
>
> ATTRIBUTE src_leg 0 string
>
> Probably isn't valid because "0" is more than likely already being
> used. Notice that the various ATTRIBUTE numbers are all unique and just
> increment. So use the next higher number that is available. If the
> last ATTRIBUTE was 240 then your definition might look like:
>
> ATTRIBUTE src_leg 241 string
>
> You might also want to consider the general naming convention that is
> used. The above example would then look as follows:
>
> ATTRIBUTE Src-Leg 241 string
> Note, when you get around to inserting this data into a database, the
> column name will probably not be allowed to have a dash (unless the
> column name is quoted).
>
> Regards,
> Norm
>
>
> Live Great wrote:
> > It looks like it doesn't look up the dictionary files in
> > /usr/local/share/freeradius/ directory.
> > But src_leg and dst_leg are not defined in the share directory.
> >
> > Sam.
> >
> >
> > ----- Original Message ----
> > From: Live Great <livegreat007 at yahoo.com>
> > To: Norman Brandinger <norm at goes.com>
> > Cc: users at openser.org
> > Sent: Tuesday, October 2, 2007 10:17:47 AM
> > Subject: Re: can't get code for the Failed attribute
> >
> > Hi Norman,
> >
> > Thank you for the reply.
> > With the definition of "ATTRIBUTE src_leg 0 string", I got an error
> > "src_leg is not a number".
> > After changed it to the following definition,
> > ATTRIBUTE Acct-Status-Type 40 integer
> > ATTRIBUTE Service-Type 6 integer
> > ATTRIBUTE Event-Timestamp 55 integer
> > ATTRIBUTE Acct-Session-Id 44 string
> > ATTRIBUTE src_leg 1 integer
> > ATTRIBUTE dst_leg 1 integer
> > VALUE Acct-Status-Type Start 1
> > VALUE Acct-Status-Type Stop 2
> > VALUE Acct-Status-Type Failed 0
> > VALUE Service-Type Sip-Session 15
> >
> > I still got this error:
> > ERROR:acc:extra2int: <src_leg> is not a number
> >
> > Thanks
> > Sam
> > ----- Original Message ----
> > From: Norman Brandinger <norm at goes.com>
> > To: Live Great <livegreat007 at yahoo.com>
> > Cc: users at openser.org
> > Sent: Tuesday, October 2, 2007 9:43:41 AM
> > Subject: Re: can't get code for the Failed attribute
> >
> > Hi Sam,
> >
> > In /usr/local/share/freeradius/dictionary.rfc2866 there exists the
> > following entry:
> >
> > VALUE Acct-Status-Type Failed 15
> >
> > I'm not an expert in this area, but it appears that "Failed" is sort of
> > predefined. You probably should NOT use "Failed", instead create a
> > unique attribute such as "failed-reason". This is of course assuming
> > the rest of your definitions are good.
> >
> > Please do not cross-post configuration questions of this type to the
> > developers mailing list.
> >
> > Regards,
> > Norm
> >
> >
> > Live Great wrote:
> > > Hi,
> > >
> > > After added the following Attributes in the radiusclient-ng/dictionary
> > > file:
> > > ATTRIBUTE src_leg 0 string
> > > ATTRIBUTE dst_leg 0 string
> > > ATTRIBUTE Failed 0 string
> > >
> > > I got the following error:
> > > ERROR: acc: can't get code for the Failed attribute value
> > >
> > > How to define a proper attribute in the dictionary file?
> > > Thanks
> > > Sam
> > >
> > > ----- Original Message ----
> > > From: Norman Brandinger <norm at goes.com>
> > > To: Live Great <livegreat007 at yahoo.com>
> > > Cc: devel at openser.org
> > > Sent: Monday, October 1, 2007 9:01:54 PM
> > > Subject: Re: [OpenSER-Devel] can't get code for the Sip-Response-Code
> > > attribute
> > >
> > > Good Morning,
> > >
> > > You need to make sure the dictionary settings are correct and exactly
> > > match what you have specified in OpenSER.
> > >
> > > The dictionaries are specified in radiusclient-ng and in radiusd (and
> > > mediaproxy if you use it)
> > >
> > > The error is telling you that "Sip-Response-Code" cannot be found
> in any
> > > of the dictionaries you have specified.
> > >
> > > Regards,
> > > Norm
> > >
> > > Live Great wrote:
> > > > Hi,
> > > >
> > > > I still can't this work, that's why I posted in the development
> forum.
> > > >
> > > > I have installed openser with *_ACC=ture uncommented in the
> > acc/Makfile..
> > > > But I can't start openser now.
> > > > Here is the error when I executed /usr/local/etc/rc.d/openser start:
> > > >
> > > > core:rc.d # ./openser start
> > > > Command Monit to start OpenSER...
> > > > 'openser' start: /usr/local/etc/rc.d/openser
> > > > 'openser' failed to start
> > > > Starting Open SIP Router:
> > > > Listening on
> > > > udp: 127.0.0.1 [127.0.0.1]:5060
> > > > udp: 12x..x.x..x [12x.x.x.x]:5060
> > > > Aliases:
> > > > udp: xxx..xxx..com.au:5060
> > > > udp: localhost.xxx.com.au:5060
> > > > udp: localhost:5060
> > > >
> > > > In /var/log/messages:
> > > > ERROR: acc: can't get code for the Sip-Response-Code attribute
> > > > ERROR:acc:mod_init: failed to init radius
> > > >
> > > > core:rc.d # ps -auxww | grep openser
> > > > root 35219 0.0 0.1 1520 728 p2 R+ 12:03AM 0:00.00 grep
> > > openser
> > > > core:rc.d # ps -auxww | grep radius
> > > > root 35230 0.0 0.3 5004 3256 ?? Ss 12:04AM 0:00.00
> > > > /usr/local/sbin/radiusd
> > > > core:rc.d # ps -auxww | grep mysql
> > > > mysql 75881 0.0 0.1 1732 1116 p1- I 20Sep07 0:00.02
> /bin/sh
> > > > /usr/local/bin/mysqld_safe
> > > > --defaults-extra-file=/usr/local/var/db/mysql/my.cnf --user=mysql
> > > > --datadir=/usr/local/var/db/mysql
> > > > --pid-file=/usr/local/var/db/mysql/core.xxx.com.au.pid
> > > > mysql 75924 0.0 2.7 49016 28336 p1- S 20Sep07 10:52.77
> [mysqld]
> > > > root 35237 0.0 0.1 1544 644 p2 RL+ 12:05AM 0:00.00 grep
> > mysql
> > > >
> > > > Why I got thos acc errors when starting openser?
> > > >
> > > > Thanks
> > > > SW
> > > >
> > > >
> > > >
> > > > ----- Original Message ----
> > > > From: Norman Brandinger <norm at goes.com>
> > > > To: Live Great <livegreat007 at yahoo.com>
> > > > Cc: FreeRadius users mailing list
> > > > <freeradius-users at lists.freeradius.org>; users at openser.org
> > > > Sent: Friday, September 28, 2007 11:11:23 PM
> > > > Subject: Re: [OpenSER-Users] Failed to compile openser with
> freeradius
> > > > support
> > > >
> > > > Comment the FREERADIUS=1 in the openser/Makefile
> > > >
> > > > Make sure that in modules/acc/Makefile ENABLE_RADIUS_ACC=true is not
> > > > commented
> > > >
> > > > Regards,
> > > > Norm
> > > >
> > > >
> > > > Live Great wrote:
> > > > > HI,
> > > > >
> > > > > In FreeBSD 6.2, I got this error when I compiled openser with
> > > > > freeradius support.
> > > > >
> > > > > ../../radius.h:36:32: freeradius-client.h: No such file or
> directory
> > > > > acc.c: In function `init_acc_rad':
> > > > > acc.c:464: warning: assignment makes pointer from integer without
> > > a cast
> > > > > acc.c:475: error: `DICT_ATTR' undeclared (first use in this
> > function)
> > > > > acc.c:475: error: (Each undeclared identifier is reported only
> once
> > > > > acc.c:475: error: for each function it appears in.)
> > > > > acc.c:475: error: `da' undeclared (first use in this function)
> > > > > acc.c:475: error: `DICT_VALUE' undeclared (first use in this
> > function)
> > > > > acc.c:475: error: `dv' undeclared (first use in this function)
> > > > > acc.c: In function `acc_rad_request':
> > > > > acc.c:509: error: `VALUE_PAIR' undeclared (first use in this
> > function)
> > > > > acc.c:514: error: invalid lvalue in assignment
> > > > > acc.c:555: error: `OK_RC' undeclared (first use in this function)
> > > > > gmake[1]: *** [acc.o] Error 1
> > > > > gmake[1]: Leaving directory
> > > > > `/usr/ports/net/openser/work/openser-1.2.2-tls/modules/acc'
> > > > > gmake: *** [modules] Error 2
> > > > > *** Error code 2
> > > > >
> > > > > Stop in /usr/ports/net/openser.
> > > > > *** Error code 1
> > > > >
> > > > > Is there any way I can compile openser with freeradius support?
> > > > >
> > > > > Thanks
> > > > > SW
> > > > >
> > >
> ------------------------------------------------------------------------
> > > >
> > > >
> > ------------------------------------------------------------------------
> > > >
> > > > _______________________________________________
> > > > Devel mailing list
> > > > Devel at openser.org
> > > > http://openser.org/cgi-bin/mailman/listinfo/devel
> > > >
> > >
> > >
> >
> >
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20071002/8da1dd92/attachment.htm>
More information about the sr-users
mailing list