[OpenSER-Users] serialize_branches seems to be not working

[Marcello Lupo]

Hi Klaus,
thanks for the answer, i will try it in few minutes. Anyway i have a 
question.
As i know append_branch(...) is used to appen branches to the 
destination set.
After the execution of exec_dset i have already the destination set 
populated with my gateways information ($ds and $bR confirm it).
In my tests i tried getting 2 gateways from exec_dset with q value of 
0.1 and 0.2 as follows:

sip:123456 at 10.10.10.1:5062;q=0.2
sip:123456 at 10.10.10.10:5060;q=0.1

$ds become : Contact: sip:123456 at 10.10.10.1:5062;q=0.2, 
sip:123456 at 10.10.10.10:5060;q=0.1

RURI become: sip:123456 at 10.10.10.1:5062;q=0.2

$bR become: sip:123456 at 10.10.10.10:5060;q=0.1

Is possible that i miss understood something in the append_branch() and 
serialize_branches() usage?
Thanks,
Bye,
Marcello


Klaus Darilion wrote:
> Hi Marcello!
>
> does serialize_branches() work if you add the branches in openser.cfg? 
> E.g. you could use append_branch(......) to add the branches manually 
> and then try serialize_branches() .
>
> klaus
>
> Marcello Lupo schrieb:
>> Hi to all,
>> i made some other tests about this issue and i think it can be a bug 
>> somewhere in the serialize_branches() executed after exec_dset().
>> I made tests changing the qvalue to format:
>>
>> q=1.0
>> q=0.1
>> q=1
>>
>> both with \n and \r\n at the end of lines and serialize_branches() 
>> give me all the time the same result:
>>
>> DEBUG:serialize_branches: nothing to do - all same q!
>>
>> But if i got only one line from exec_dset() it give me:
>>
>> DEBUG:serialize_branches: nothing to do - no branches!
>>
>> So it see the difference between one line and more lines from 
>> exec_dset() .
>> Please help me with this issue i really need serial forking from 
>> exec_dset() to work.
>>
>> Thanks,
>> Bye,
>> Marcello
>>
>>
>> Marcello Lupo wrote:
>>> Hi to all,
>>> i'm using openser 1.2.2 no tls and i use exec_dset to get list of 
>>> gateways in destination set to be serialized.
>>>
>>> After execution of exec_dset i get in output:
>>>
>>> sip:123456 at 10.10.10.1:5062;q=0.2
>>> sip:123456 at 10.10.10.10:5060;q=0.1
>>>
>>> $ds become : Contact: sip:123456 at 10.10.10.1:5062;q=0.2, 
>>> sip:123456 at 10.10.10.10:5060;q=0.1
>>>
>>> RURI become: sip:123456 at 10.10.10.1:5062;q=0.2
>>>
>>> $bR become: sip:123456 at 10.10.10.10:5060;q=0.1
>>>
>>> All seems to be fine but when i run serialize_branches() i get:
>>>
>>> DEBUG:serialize_branches: nothing to do - all same q!
>>>
>>> Any ideas on what i'm missing?
>>>
>>> May be something in the output of exec_dset??
>>> I'm using the \n between lines in my custom LCR scripts to get 
>>> gateways from DB.
>>>
>>> Thanks,
>>> Bye,
>>> Marcello
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at openser.org
>>> http://openser.org/cgi-bin/mailman/listinfo/users
>>>
>>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at openser.org
>> http://openser.org/cgi-bin/mailman/listinfo/users
>
>