[Serusers] nathelper doesn't ping registered users

[Tomasz Zieleniewski]

I'm sorry for the CC
here is my config:

debug=3         # debug level (cmd line: -dddddddddd)
memdbg=5
memlog=5
log_facility=LOG_LOCAL0
fork=yes
log_stderror=no
check_via=yes    # (cmd. line: -v)
dns=no          # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
tls_port_no=5061
children=4
user=ser
group=ser
mhomed=yes
disable_tcp=no
tcp_accept_aliases=yes
enable_tls=no
sip_warning=0
reply_to_via=no
alias="voip.touk.pl"

dns_retr_time=1
dns_retr_no=1
dns_servers_no=1
dns_use_search_list=no
dns_try_ipv6=no
# dns cache & failover
use_dns_cache=on
use_dns_failover=on
# dns_cache_flags=0
dns_cache_negative_ttl=300
dns_cache_min_ttl=60
dns_cache_max_ttl=86400 # 1 day
dns_cache_mem=2048 # 2 MB
dns_cache_gc_interval=60

tcp_connection_lifetime=3600
tcp_max_connections=2048
tcp_connect_timeout=1

loadmodule ...
....

# specify the path to you database here
modparam("acc_db|auth_db|avp_db|domain|gflags|usrloc|uri_db|speeddial|msilo|lcr",
"db_url", "mysql://ser:ser@localhost/ser")

# -- usrloc params --
modparam("usrloc", "db_mode", 1)

# -- registrar params --
modparam("registrar", "default_expires", 300)
modparam("registrar", "min_expires", 60)
modparam("registrar", "max_expires", 300)
modparam("registrar", "append_branches", 1)
modparam("registrar", "received_param", "rcv")
modparam("registrar", "max_contacts", 2)

# -- auth params --
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")

# -- rr params --
modparam("rr", "enable_full_lr", 1)
modparam("rr", "cookie_filter", "uac_nat")
modparam("rr", "cookie_secret", "secret")
modparam("rr", "user_part_avp", "route_user")
modparam("rr", "next_route_avp", "route_next")

# -- gflags params --
modparam("gflags", "load_global_attrs", 1)

# -- domain params --
modparam("domain", "load_domain_attrs", 1)

# -- ctl params --
modparam("ctl", "binrpc", "unixs:/tmp/ser-bsp_ctl")
modparam("ctl", "fifo", "fifo:/tmp/ser-bsp_fifo")
# modparam("ctl", "binrpc", "tcp:localhost:2046")
modparam("ctl", "mode", 0777)

# -- tm params --
modparam("tm", "restart_fr_on_each_reply", 1)

# -- auth_radius params --
modparam("auth_radius", "radius_config",
"/usr/local/etc/radiusclient-ng/radiusclient.conf")
modparam("auth_radius", "service_type", 15)

# -- options params --
modparam("options", "accept", "*/*")
modparam("options", "accept_encoding", "")
modparam("options", "accept_language", "en")

# -- ratelimit params --
modparam("ratelimit","timer_interval", 10)
modparam("ratelimit","invite_limit", 100)
modparam("ratelimit","register_limit", 100)
modparam("ratelimit","subscribe_limit", 100)

# -- xmlrpc params --
modparam("xmlrpc", "route","RPC")

# -- nathelper params --
modparam("nathelper", "natping_interval", 20)
modparam("nathelper", "ping_nated_only", 0)
modparam("nathelper", "rtpproxy_disable", 1)
modparam("nathelper", "tcpping_crlf", 1)

# -- tls params --
modparam("tls", "config", "/home/ser/ser/ca/tls-bsp.cfg")
modparam("tls", "tls_force_run", 0)
modparam("tls", "tls_log",3)
modparam("tls", "handshake_timeout", 10)
modparam("tls", "send_timeout", 10)
modparam("tls", "tls_disable_compression", 0)
#modparam("tls", "private_key", "/etc/certs/key.pem")
#modparam("tls", "certificate", "/etc/certs/cert.pem")
#modparam("tls", "ca_list", "/etc/certs/ca_list.pem")
#modparam("tls", "require_certificate", 0)
#modparam("tls", "verify_certificate", 1)
#modparam("tls", "tls_method", "TLSv1")

route{
...
}

On Nov 24, 2007 9:35 PM, Atle Samuelsen <clona at cyberhouse.no> wrote:
> Hi,
>
> Always CC the list.
>
> then I dont know.. post your full config so people can see if they see
> something
> -A
>
> * Tomasz Zieleniewski <tzieleniewski at gmail.com> [071124 20:38]:
>
> > Hi,
> >
> > I had that parameter set to 0, but still no udp packets...
> >
> > On Nov 24, 2007 6:43 PM, Atle Samuelsen <clona at cyberhouse.no> wrote:
> > > * Tomasz Zieleniewski <tzieleniewski at gmail.com> [071124 16:50]:
> > >
> > > > HI,
> > > >
> > > > I have the following nathelper settings:
> > > > modparam("nathelper", "natping_interval", 20)
> > > > modparam("nathelper", "ping_nated_only", 1)
> > > > modparam("nathelper", "rtpproxy_disable", 1)
> > > > modparam("nathelper", "tcpping_crlf", 1)
> > > >
> > > > But i cant see any udp packets being sent to registered users.
> > > > Please point me what did I miss.
> > >
> > > Hi,
> > >
> > > without seeing any more of your config, I'm guessing that you do not set
> > > the natflag, so if you change ping_nated_only to 0, I think you will see
> > > some udp packets.
> > >
> > > - Atle
> > > (shot in the whild world of sip)
> > >
> > >
> > > >
> > > > Best
> > > > Tomasz
> > > > _______________________________________________
> > > > Serusers mailing list
> > > > Serusers at lists.iptel.org
> > > > http://lists.iptel.org/mailman/listinfo/serusers
> > >
>