[Users] BUG: qm_free ?
Bogdan-Andrei Iancu
bogdan at voice-system.ro
Wed May 30 13:02:39 CEST 2007
HI George,
first check if the you get the message "core was generated" - if yes,
you should find the core file in the working directory of openser; if
non provided from CLI, check in the root (/) directory.
regards,
bogdan
Papadopoulos Georgios wrote:
> I cannot find a core file anywhere. Where should it be? I can reproduce
> the problem very easily, so please give me more instructions on how to
> get the coredump+backtrace that you need.
>
> thank you
>
> George
>
>
>
>> -----Original Message-----
>> From: Klaus Darilion [mailto:klaus.mailinglists at pernau.at]
>> Sent: Tuesday, May 29, 2007 8:34 PM
>> To: Papadopoulos Georgios
>> Cc: users at openser.org
>> Subject: Re: [Users] BUG: qm_free ?
>>
>> Maybe a bug?
>>
>> Can you provide a coredump+backtrace? I'm sure Bogdan or
>> Daniel will take a look at it.
>>
>> regards
>> klaus
>>
>> Papadopoulos Georgios wrote:
>>
>>> Hi Klaus,
>>>
>>> It crashes immediately, I have no time to do anything. I
>>>
>> tried again
>>
>>> and I increased the log level. So now it is process 692.
>>>
>> Here is part
>>
>>> of the output. I can send you the whole output if that helps.
>>>
>>> thank you
>>>
>>> George
>>>
>>>
>>> 16(692) DEBUG: timer routine:5,tl=0xb61abdc4 next=0xb61adfd8,
>>> timeout=3000000
>>> 16(692) DEBUG: retransmission_handler : request resending
>>> (t=0xb61abc78, REGISTER ... )
>>> 16(692) DEBUG:tm:set_timer: relative timeout is 3000000
>>> 16(692) DEBUG: add_to_tail_of_timer[6]: 0xb61abdc4 (6000000)
>>> 16(692) DEBUG: retransmission_handler : done
>>> 16(692) DEBUG: timer routine:5,tl=0xb61adfd8 next=(nil),
>>> timeout=3000000
>>> 16(692) DEBUG: retransmission_handler : request resending
>>> (t=0xb61ade8c, REGISTER ... )
>>> 16(692) DEBUG:tm:set_timer: relative timeout is 3000000
>>> 16(692) DEBUG: add_to_tail_of_timer[6]: 0xb61adfd8 (6000000)
>>> 16(692) DEBUG: retransmission_handler : done
>>> 16(692) DEBUG: timer routine:0,tl=0xb6182810 next=0xb61845ac,
>>> timeout=3
>>> 16(692) DEBUG: final_response_handler:stop retr. and send CANCEL
>>> (0xb61826a8)
>>> 16(692) DEBUG:tm:t_should_relay_response: T_code=0, new_code=408
>>> 16(692) DEBUG:tm:t_pick_branch: picked branch 0, code 408
>>> 16(692) DEBUG:tm:t_should_relay_response: dns-failover
>>>
>> test: branch=0,
>>
>>> last_recv=408, flags=0
>>> 16(692) DEBUG:tm:t_should_relay_response: trying DNS-based failover
>>> 16(692) qm_malloc(0xb5f99000, 72) called from blacklists.c:
>>> add_rule_to_list(377)
>>> 16(692) qm_malloc(0xb5f99000, 72) returns address 0xb6278238 frag.
>>> 0xb6278220 (size=72) on 1 -th hit
>>> 16(692) DBG:add_list_to_head: adding to bl dns 0xb6278238,0xb6278238
>>> 16(692) DEBUG:tm:local_reply: branch=0, save=0, winner=0
>>> 16(692) DEBUG:tm:local_reply: local transaction completed
>>> 16(692) DEBUG: add_to_tail_of_timer[2]: 0xb61826f0 (8)
>>> 16(692) DEBUG: final_response_handler : done
>>> 16(692) DEBUG: timer routine:0,tl=0xb61845ac next=0xb6186c6c,
>>> timeout=3
>>> 16(692) DEBUG: timer routine:0,tl=0xb6186c6c next=0xb6188d98,
>>> timeout=3
>>> 16(692) DEBUG: final_response_handler:stop retr. and send CANCEL
>>> (0xb6186b04)
>>> 16(692) DEBUG:tm:t_should_relay_response: T_code=0, new_code=408
>>> 16(692) DEBUG:tm:t_pick_branch: picked branch 0, code 408
>>> 16(692) DEBUG:tm:t_should_relay_response: dns-failover
>>>
>> test: branch=0,
>>
>>> last_recv=408, flags=0
>>> 16(692) DEBUG:tm:t_should_relay_response: trying DNS-based failover
>>> 16(692) qm_malloc(0xb5f99000, 72) called from blacklists.c:
>>> add_rule_to_list(377)
>>> 16(692) qm_malloc(0xb5f99000, 72) returns address 0xb62782b0 frag.
>>> 0xb6278298 (size=72) on 1 -th hit
>>> 16(692) DBG:add_list_to_head: adding to bl dns 0xb62782b0,0xb62782b0
>>> 16(692) qm_free(0x8151c40, 0xb62782b0), called from blacklists.c:
>>> rm_dups(440)
>>> 16(692) BUG: qm_free: bad pointer 0xb62782b0 (out of memory
>>>
>> block!) -
>>
>>> aborting
>>>
>>>
>>>> -----Original Message-----
>>>> From: Klaus Darilion [mailto:klaus.mailinglists at pernau.at]
>>>> Sent: Tuesday, May 29, 2007 5:48 PM
>>>> To: Papadopoulos Georgios
>>>> Cc: users at openser.org
>>>> Subject: Re: [Users] BUG: qm_free ?
>>>>
>>>> The bug was in process 32133
>>>>
>>>> There are no log statements from this process. What what this
>>>> process?
>>>> (use "openserctl ps" to see the PIDs of the processes)
>>>>
>>>> regards
>>>> klaus
>>>>
>>>> Papadopoulos Georgios wrote:
>>>>
>>>>> Hello all,
>>>>>
>>>>> I am having some trouble geting Openser 1.2 to work. It
>>>>>
>>>> crashes pretty
>>>>
>>>>> much immediately. I have tried it successfully on a test
>>>>>
>>>> system but as
>>>>
>>>>> soon as I start it in the production environment, it
>>>>>
>>>> crashes. Any ideas?
>>>>
>>>>>
>>>>> Thank you for any help.
>>>>>
>>>>> George
>>>>>
>>>>>
>>>>> 0(0) INFO: statistics manager successfully initialized
>>>>> 0(0) StateLess module - initializing
>>>>> 0(0) TM - initializing...
>>>>> 0(0) Maxfwd module- initializing
>>>>> 0(0) INFO:ul_init_locks: locks array size 512
>>>>> 0(0) TextOPS - initializing
>>>>> 0(0) AVPops - initializing
>>>>> 0(0) permissions - initializing
>>>>> 0(0) WARNING: File not found:
>>>>>
>>>> /root/openser/config/permissions.allow
>>>>
>>>>> 0(0) Default allow file
>>>>>
>>>> (/root/openser/config/permissions.allow) not
>>>>
>>>>> found => empty rule set
>>>>> 0(0) WARNING: File not found:
>>>>>
>> /root/openser/config/permissions.deny
>>
>>>>> 0(0) Default deny file
>>>>>
>> (/root/openser/config/permissions.deny) not
>>
>>>>> found => empty rule set
>>>>> 0(0) AUTH module - initializing
>>>>> 0(0) AUTH_DB module - initializing
>>>>> 0(0) ACC - initializing
>>>>> 0(0) INFO:xl_parse_name: using hdr type (4) instead of <From>
>>>>> 0(0) INFO:xl_parse_name: using hdr type (3) instead of <To>
>>>>> 0(0) INFO:textops:hname_fixup: using hdr type name <Nat-flag>
>>>>> 0(0) INFO:textops:hname_fixup: using hdr type (31) instead of
>>>>> <Remote-Party-ID>
>>>>> 0(0) INFO: udp_init: SO_RCVBUF is initially 110592
>>>>> 0(0) INFO: udp_init: SO_RCVBUF is finally 262142
>>>>> 0(0) INFO: udp_init: SO_RCVBUF is initially 110592
>>>>> 0(0) INFO: udp_init: SO_RCVBUF is finally 262142
>>>>> 0(0) INFO: udp_init: SO_RCVBUF is initially 110592
>>>>> 0(0) INFO: udp_init: SO_RCVBUF is finally 262142
>>>>> 0(0) INFO: udp_init: SO_RCVBUF is initially 110592
>>>>> 0(0) INFO: udp_init: SO_RCVBUF is finally 262142
>>>>> 0(0) INFO: udp_init: SO_RCVBUF is initially 110592
>>>>> 0(0) INFO: udp_init: SO_RCVBUF is finally 262142
>>>>> 1(32087) INFO:mi_fifo:mi_child_init(1): extra fifo
>>>>>
>>>> listener processes
>>>>
>>>>> created
>>>>> 2(32093) pre_auth(): Credentials received are not filled properly
>>>>> 1(32087) ERROR: parse_to_param: spitting out [<] in status 22
>>>>> 1(32087) ERROR: parse_to: invalid To - unexpected end of
>>>>>
>>>> header in
>>>>
>>>>> state 22
>>>>> 1(32087) ERROR: get_hdr_field: bad to header
>>>>> 1(32087) ERROR: bad header field
>>>>> 1(32087) ERROR:maxfwd:is_maxfwd_present : parsing
>>>>>
>>>> MAX_FORWARD header
>>>>
>>>>> failed!
>>>>> 1(32087) ERROR: parse_to_param: spitting out [<] in status 22
>>>>> 1(32087) ERROR: parse_to: invalid To - unexpected end of
>>>>>
>>>> header in
>>>>
>>>>> state 22
>>>>> 1(32087) ERROR: get_hdr_field: bad to header
>>>>> 1(32087) ERROR: bad header field
>>>>> 1(32087) find_first_route: Error while parsing headers
>>>>> 1(32087) ERROR: parse_to_param: spitting out [<] in status 22
>>>>> 1(32087) ERROR: parse_to: invalid To - unexpected end of
>>>>>
>>>> header in
>>>>
>>>>> state 22
>>>>> 1(32087) ERROR: get_hdr_field: bad to header
>>>>> 1(32087) ERROR: bad header field
>>>>> 1(32087) find_credentials(): Error while parsing headers
>>>>> 1(32087) pre_auth(): Error while looking for credentials
>>>>> 1(32087) ERROR: parse_to_param: spitting out [<] in status 22
>>>>> 1(32087) ERROR: parse_to: invalid To - unexpected end of
>>>>>
>>>> header in
>>>>
>>>>> state 22
>>>>> 1(32087) ERROR: get_hdr_field: bad to header
>>>>> 1(32087) ERROR: bad header field
>>>>> 1(32087) ERROR: parse_to_param: spitting out [<] in status 22
>>>>> 1(32087) ERROR: parse_to: invalid To - unexpected end of
>>>>>
>>>> header in
>>>>
>>>>> state 22
>>>>> 1(32087) ERROR: get_hdr_field: bad to header
>>>>> 1(32087) ERROR: bad header field
>>>>> 1(32087) ERROR: build_res_buf_from_sip_req: alas, parse_headers
>>>>> failed
>>>>> 1(32087) pre_auth(): Error while sending 400 reply
>>>>> INFO: started (pid: 32073)
>>>>> [root at ser1 sbin]# 1(32087) pre_auth(): Credentials
>>>>>
>>>> received are not
>>>>
>>>>> filled properly
>>>>> 16(32133) BUG: qm_free: bad pointer 0xb648f38c (out of
>>>>>
>>>> memory block!)
>>>>
>>>>> - aborting
>>>>> 1(32087) WARNING: script writer didn't release transaction
>>>>> 3(32096) WARNING: script writer didn't release transaction
>>>>> 1(32087) WARNING: script writer didn't release transaction
>>>>> 3(32096) WARNING: script writer didn't release transaction
>>>>> 3(32096) WARNING: script writer didn't release transaction
>>>>> 2(32093) WARNING: script writer didn't release transaction
>>>>> 3(32096) WARNING: script writer didn't release transaction
>>>>> 1(32087) WARNING: script writer didn't release transaction
>>>>> 2(32093) WARNING: script writer didn't release transaction
>>>>> 3(32096) WARNING: script writer didn't release transaction
>>>>> 1(32087) WARNING: script writer didn't release transaction
>>>>> 3(32096) WARNING: script writer didn't release transaction
>>>>> 2(32093) WARNING: script writer didn't release transaction
>>>>> 3(32096) WARNING: script writer didn't release transaction
>>>>> 2(32093) WARNING: script writer didn't release transaction
>>>>> 3(32096) WARNING: script writer didn't release transaction
>>>>> 2(32093) WARNING: script writer didn't release transaction
>>>>> 1(32087) WARNING: script writer didn't release transaction
>>>>> 1(32087) WARNING: script writer didn't release transaction
>>>>> 3(32096) WARNING: script writer didn't release transaction
>>>>> 1(32087) WARNING: script writer didn't release transaction
>>>>> 2(32093) WARNING: script writer didn't release transaction
>>>>> 1(32087) WARNING: script writer didn't release transaction
>>>>> 3(32096) WARNING: script writer didn't release transaction
>>>>> 3(32096) WARNING: script writer didn't release transaction
>>>>> 1(32087) WARNING: script writer didn't release transaction
>>>>> 3(32096) WARNING: script writer didn't release transaction
>>>>> 3(32096) ERROR: parse_via: invalid char <=> in state 201
>>>>> 3(32096) error: parse_via_param
>>>>> 3(32096) ERROR: parse_via on: <SIP/2.0/UDP
>>>>> 87.202.97.60:59945;branc==z9hG4bK2e302aa9;rport
>>>>> From: <sip:gdt at sip.i-call.gr>;tag=as52e610af
>>>>> To: <sip:gdt at sip.i-call.gr>
>>>>> Call-ID: 1b7dabcf26487db47f520b5c7195958e at gdt.ath.cx
>>>>> <mailto:1b7dabcf26487db47f520b5c7195958e at gdt.ath.cx>
>>>>> CSeq: 4471 REGISTER
>>>>> User-Agent: Asterisk PBX
>>>>> Max-Forwards: 70
>>>>> Expires: 120
>>>>> Contact: <sip:s at 87.202.97.60:59945>
>>>>> Event: registration
>>>>> Content-Length: 0
>>>>>
>>>>> 3(32096) ERROR: parse_via parse error, parsed so
>>>>>
>> far:<SIP/2.0/UDP
>>
>>>>> 87.202.97.60:59945;branc=>
>>>>> 3(32096) ERROR: get_hdr_field: bad via
>>>>> 3(32096) ERROR: bad header field
>>>>> 3(32096) ERROR: parse_msg: message=<REGISTER sip:sip.i-call.gr
>>>>> SIP/2.0
>>>>> Via: SIP/2.0/UDP 87.202.97.60:59945;branc==z9hG4bK2e302aa9;rport
>>>>> From: <sip:gdt at sip.i-call.gr>;tag=as52e610af
>>>>> To: <sip:gdt at sip.i-call.gr>
>>>>> Call-ID: 1b7dabcf26487db47f520b5c7195958e at gdt.ath.cx
>>>>> CSeq: 4471 REGISTER
>>>>> User-Agent: Asterisk PBX
>>>>> Max-Forwards: 70
>>>>> Expires: 120
>>>>> Contact: <sip:s at 87.202.97.60:59945>
>>>>> Event: registration
>>>>> Content-Length: 0
>>>>>
>>>>> 3(32096) ERROR: receive_msg: parse_msg failed
>>>>> 3(32096) WARNING: script writer didn't release transaction
>>>>> 3(32096) WARNING: script writer didn't release transaction
>>>>> 1(32087) WARNING: script writer didn't release transaction
>>>>> 3(32096) WARNING: script writer didn't release transaction
>>>>> 1(32087) WARNING: script writer didn't release transaction
>>>>> 3(32096) WARNING: script writer didn't release transaction
>>>>> 2(32093) WARNING: script writer didn't release transaction
>>>>> 1(32087) WARNING: script writer didn't release transaction
>>>>> 2(32093) WARNING: script writer didn't release transaction
>>>>> 2(32093) WARNING: script writer didn't release transaction
>>>>> 0(32073) child process 32133 exited by a signal 6
>>>>> 0(32073) core was generated
>>>>> 0(32073) INFO: terminating due to SIGCHLD
>>>>> 1(32087) INFO: signal 15 received
>>>>> 2(32093) INFO: signal 15 received
>>>>> 3(32096) INFO: signal 15 received
>>>>> 5(32102) INFO: signal 15 received
>>>>> 6(32103) INFO: signal 15 received
>>>>> 13(32123) INFO: signal 15 received
>>>>> 14(32127) INFO: signal 15 received
>>>>> 15(32130) INFO: signal 15 received
>>>>> 1(32087) 4(32099) 7(32104) INFO: signal 15 received
>>>>> 8(32109) INFO: signal 15 received
>>>>> 9(32112) INFO: signal 15 received
>>>>> 10(32115) INFO: signal 15 received
>>>>> 11(32118) INFO: signal 15 received
>>>>> 12(32121) INFO: signal 15 received
>>>>> INFO: signal 15 received
>>>>> INFO: signal 15 received
>>>>> 0(32073) INFO:mi_fifo:mi_destroy: seems that fifo child
>>>>>
>> is already
>>
>>>>> dead!
>>>>>
>>>>>
>>>>>
>>>>> Disclaimer
>>>>> The information in this e-mail and any attachments is
>>>>>
>>>> confidential. It is intended solely for the attention and
>>>>
>> use of the
>>
>>>> named addressee(s). If you are not the intended recipient,
>>>>
>> or person
>>
>>>> responsible for delivering this information to the intended
>>>> recipient, please notify the sender immediately. Unless
>>>>
>> you are the
>>
>>>> intended recipient or his/her representative you are not
>>>>
>> authorized
>>
>>>> to, and must not, read, copy, distribute, use or retain
>>>>
>> this message
>>
>>>> or any part of it. E-mail transmission cannot be guaranteed to be
>>>> secure or error-free as information could be intercepted,
>>>>
>> corrupted,
>>
>>>> lost, destroyed, arrive late or incomplete, or contain viruses.
>>>>
>>>>>
>>>>>
>>>>>
>> ---------------------------------------------------------------------
>>
>>>> -
>>>>
>>>>> --
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users at openser.org
>>>>> http://openser.org/cgi-bin/mailman/listinfo/users
>>>>>
>
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>
>
More information about the sr-users
mailing list