[Serusers] [Serdev] loose_route behaviour, detecting single Route with myself

[JF]

Answer to 1st question: Yes.
Answer to 2nd question: if the call is routed to a SIP phone, the
Req-URI is rewritten with an appropriate SIP URI (not necessarily
sip:number_in_tel_uri at mydomain). If it goes to a PSTN gw, it is kept
unchanged as a tel URI.

JF

On 7/11/07, Nils Ohlmeier <nils at iptel.org> wrote:
> Hi,
>
> On Wednesday 11 July 2007 17:07:22 JF wrote:
> > The scenario was actually using an Application Server.
> > The AS starts a call and sends an INVITE with tel URI to a SER which
> > is the entrypoint to my SIP infrastructure. The AS uses this SER as
> > outbound proxy, so it includes its SIP URI in a Route header.
> >
> > The use-case for tel URI in the Req-URI here is that it will be the
> > task of my SIP infrastructure to determine if this tel URI is
> > associated to a SIP phone, or if it should be forwarded to a PSTN gw.
>
> But your AS uses a SIP URI as Contact in the INVITE?
> And when the call is established either to a phone or the GW there will be no
> TEL URI any more in the dialog, right?
>
> If you can answer both questions from above with yes, I would propose to add
> another check for the To-tag before we deviced if this is loose route driven
> or not. That should then hopefully solve your problem in a generic way
> without caring about the URI scheme.
>
>   Nils
>
> > JF
> >
> > On 7/11/07, Nils Ohlmeier <nils at iptel.org> wrote:
> > > Hello,
> > >
> > > I think the TEL URI was invented to make the live easier for PSTN
> > > gateways. So they should only be used between proxy's and gateways (or
> > > vice versa). This also means that a TEL URI should not be used routing
> > > between SIP proxies. IMHO basically the first fully SIP aware hop should
> > > turn the TEL URI into a SIP URI. That makes life of everybody easier.
> > >
> > > So I think that treating a TEL URI as a local URI (as if it would have
> > > one of the local domains) is not the correct solution.
> > >
> > > To understand the scenario a little bit better: in this an in-dialog
> > > request with a To-tag (then I'm wondering how this can happen), or is
> > > this an initial request without a To-tag (the devices uses your proxy as
> > > outbound proxy)?
> > >
> > > Regards
> > >   Nils
> > >
> > > On Thursday 28 June 2007 17:13:43 JF wrote:
> > > > I would propose to simply apply this patch to modules/rr/loose.c:
> > > >
> > > > @@ -1069,8 +1069,8 @@
> > > >                 return -1;
> > > >         }
> > > >
> > > > -       if (is_myself(&_m->parsed_uri.host, _m->parsed_uri.port_no)
> > > > -                       || _m->parsed_uri.type==TEL_URI_T ||
> > > > _m->parsed_uri.type==TELS_URI_T) {
> > > > +       if (_m->parsed_uri.type==TEL_URI_T ||
> > > > _m->parsed_uri.type==TELS_URI_T || +
> > > > is_myself(&_m->parsed_uri.host,
> > > > _m->parsed_uri.port_no)) {
> > > >                 DBG("loose_route: RURI is myself (or tel URI)\n");
> > > >                 if ((ret = is_myself(&puri.host, puri.port_no)) == 1 &&
> > > >                         !(enable_double_rr && is_2rr(&puri.params))) {
> > > >
> > > >
> > > > JF
> > > >
> > > > On 6/22/07, Greger Viken Teigre <greger at teigre.com> wrote:
> > > > > This seems like a corner case where the tel uri with no domain
> > > > > results in maybe a bit unfortunate return code from loose_route.
> > > > > Comments anyone? g-)
>