[OpenSER-Users] BLA errors

[Jeremy George]

Hi Anca,

  Thanks for the quick reply.  I wondered a little about the phones, too.
Alan sent me a note privately, very tactfully reminding me that I'd sent
less phone information than I should have.

The Polycom 650:
  bootrom.ld version:  3.2.3.0002
  sip version:         2.1.2.0078

The Polycom 330:
  bootrom.lod verion:  3.2.3.0021
  sip version:         2.1.2.0049

  Both phone.cfgs are attached, as well ngrep traces from reboots.  I did
two traces, rebooting each phone separately.

  Again, I appreciate the help very much.  Thanks.

- Jeremy


>-----Original Message-----
>From: Anca-Maria Vamanu [mailto:anca at voice-system.ro]
>Sent: Thursday, July 12, 2007 08:18 AM
>To: 'Jeremy George'
>Cc: users at openser.org
>Subject: Re: [OpenSER-Users] BLA errors
>
>Hello,
>
>The implementation of the  bla extension has been done according to the 
>specifications in  draft-anil-sipping-bla-03.txt, and tested with 
>Polycom 430.
> Since we received positive feedback from users impementing BLA, I am 
>thinking that the phones you use have a different behaviour and that 
>here is the cause of the errors.
>To detect the exact cause I would need some more data. Could you send 
>me  a part of the log , after starting openser and the first phones 
>registers, subscribes and is sent a Notify?
>
>regards,
>
>Anca Vamanu
>
>Jeremy George wrote:
>
>>Hello All,
>>
>>  I have BLA implemented, with errors.  An ngrep trace of relevant packets
>>showing errors follows.  The configurations of both main proxy and bla
>>presence server are attached.
>>
>>  I stripped the main proxy to the bone.  No outside routing at all.  The
>>bla presence server is almost all from the sample.
>>
>>  75.56.10.115 is a Cisco 7960 with one line registered:  jeremy/private
>>  75.56.10.116 is a Polycom 650 with two lines registered: jessica/private
>>    and helen/shared
>>  75.56.10.117 is a Polycom 330 with two lines registered: didama/private
>>    and helen/shared
>>  128.91.3.19 is the main proxy running openser v1.2.1 .
>>  128.91.2.215 is the bla presence server running openser svn 2413 .
>>
>>  This error: "1(1184) PUA:subs_cback_func: no reply message found" is
>>being produced repeatedly on the bla presence server.
>>
>>  Finally, I'm getting these error messages on the bla presence server:
>>
>> 0(1284) PUA_BLA: handle_notify: ERROR Notify in a non existing dialog
>> 0(1284) WARNING: script writer didn't release transaction
>>
>>  From time-to-time pua entries eat all of available memory.  Curiously,
>>they were all for the Polycom 330 and none were for the Polycom 650.
>>
>>  Any help is greatly appreciated.  Thanks.
>>
>>- Jeremy
>>
>>  
>>
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 330.cfg
Type: application/octet-stream
Size: 1025 bytes
Desc: not available
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20070712/a209a16c/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 650.cfg
Type: application/octet-stream
Size: 1041 bytes
Desc: not available
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20070712/a209a16c/attachment-0001.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: log330
Type: application/octet-stream
Size: 15536 bytes
Desc: not available
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20070712/a209a16c/attachment-0002.obj>