[Serusers] xlite and ser

[Verbeiren, David]

If you run a SIP client and the SER proxy on the same box (and assuming
same IP address since you've left Auto-detect-IP = yes), you need to
configure the client to listen to a different port than the standard
5060 which SER is already listening on. On XLite, you can change this in
System Settings -> Network.

 

Regards,

-David

 

________________________________

From: serusers-bounces at lists.iptel.org
[mailto:serusers-bounces at lists.iptel.org] On Behalf Of zahra bahar
Sent: 11 January 2007 09:31
To: serusers at lists.iptel.org
Subject: [Serusers] xlite and ser

 

my configure in xlite:in system setting
    in network I put these:
    Auto detect IP:yes
    Primary stun server:blank
    in sip proxy I selected default and:
    enabled:yes
    display name:user
    username:1234
    Aotorisation user:1234
    password:1234
    Domain/Realm:10.10.10.138
    sip proxy:10.10.10.138:5060
    use outband proxy:default
    send internal ip:Always
    register:default
    Is it any wrong?this xlite  phone is on a pc that ser server 
is.another one is on another PC and only in username and   display and 
password differs with  this one. 
      I am in the back of a NAT but my two clients and server are 
there. 
      what is so important in setting xlite?
      thanks.

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

  

________________________________

Cheap Talk? Check out
<http://us.rd.yahoo.com/mail_us/taglines/postman8/*http:/us.rd.yahoo.com
/evt=39663/*http:/voice.yahoo.com>  Yahoo! Messenger's low PC-to-Phone
call rates.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20070111/b7e9f8f1/attachment.htm>