[Users] Hijack 'Move Temporarily'

Sam Lee sam.lee at super.net.sg
Mon Jan 29 10:19:59 CET 2007


Sad thing is , I do the billing via the PSTN gateway.
So I definitely have to make the subscriber show up on the
callingpartynumber.
Any way of manipulating the calling party number ? 

-----Original Message-----
From: Howard Tang [mailto:howard615 at gmail.com] 
Sent: Monday, January 29, 2007 5:16 PM
To: Sam Lee
Cc: Atle Samuelsen; users at openser.org
Subject: Re: [Users] Hijack 'Move Temporarily'

Hi Sam

I have similar setup , you need muilt call leg accounting in order to do
proper billing.

Regards,
Howard


On 1/29/07, Sam Lee <sam.lee at super.net.sg> wrote:
> Hey Guys,
>
> Will I be able to manipulate the FROM header inside the failure route
?
> I tried to use UAC_replace_from() but seems like there's an error.
>
> Yes, the call forwarding is causing problem. Now it appears as though 
> the initial caller (PSTN) called the final called party (PSTN) and I 
> can't bill the subscriber !
>
> Regards,
> Sam
>
> -----Original Message-----
> From: Atle Samuelsen [mailto:clona at cyberhouse.no]
> Sent: Monday, January 29, 2007 3:00 PM
> To: Sam Lee
> Cc: Carsten Bock; users at openser.org
> Subject: Re: [Users] Hijack 'Move Temporarily'
>
> Did you do a append_branch();
>
> -atle
>
> * Sam Lee <sam.lee at super.net.sg> [070129 04:57]:
> > Hey Carsten,
> >
> > Thanks for the info.
> > The example you've provided shows t_relay , which will generate a 
> > INVITE and relays it back to the UA.
> > How do I get it to relay to the gateway I wanted ?
> > I've tried rewritehostport("x.x.x.x:5060") before t_relay but 
> > doesn't help.
> >
> > Any clue ?
> >
> > Regards,
> > Sam
> >
> > -----Original Message-----
> > From: Carsten Bock [mailto:lists at bock.info]
> > Sent: Friday, January 26, 2007 5:35 PM
> > To: Sam Lee
> > Cc: users at openser.org
> > Subject: Re: [Users] Hijack 'Move Temporarily'
> >
> > Hi Sam,
> >
> > Take a look at the uac_redirect-Module. This does exactly, what you 
> > want to.
> > Here are the docs:
> > http://openser.org/docs/modules/1.1.x/uac_redirect.html
> >
> > In the routing-logic, you just have to define the following
> > failure-route:
> >
> > failure_route[1] {
> >       if (t_check_status("3[0-9][0-9]")) {
> >               get_redirects("*");
> >               t_relay();
> >               exit;
> >       }
> > }
> >
> > An of course, in the route to the forwarder a "t_on_failure("1");".
> >
> > Carsten
> >
> > Am Freitag, den 26.01.2007, 12:02 +0800 schrieb Sam Lee:
> > > Hey Guys,
> > >
> > > Normally if the SIP-UA is call-forwarded to a different number , 
> > > it will send a 'Move Temporarily' to the proxy , which in turn 
> > > relay this
> >
> > > message to the originating gateway.
> > >
> > > The problem is , if they call forward to a number which the 
> > > originating gateway doesn't know what to do with it , it will just

> > > kill the call.
> > >
> > > Can i hijack 'Move Temporarily' directly in the proxy and sending 
> > > this
> >
> > > call to a different gateway rather than relaying it to the 
> > > originating
> >
> > > gateway ?
> > >
> > > Please let me know if you can't understand me.
> > > Thanks!
> > >
> > > Regards,
> > > Sam
> > > _______________________________________________
> > > Users mailing list
> > > Users at openser.org
> > > http://openser.org/cgi-bin/mailman/listinfo/users
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users at openser.org
> > http://openser.org/cgi-bin/mailman/listinfo/users
>
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>


--
Howard Tang
ICQ : 259083
MSN : howard615 at hotmail.com




More information about the sr-users mailing list