[Serusers] Re: Serusers Digest, Vol 43, Issue 12
wangdq at gongye.com.cn
wangdq at gongye.com.cn
Thu Feb 15 02:49:09 CET 2007
test
On Sun, 2006-11-12 at 12:00 +0000, serusers-request at lists.iptel.org
wrote:
> Send Serusers mailing list submissions to
> serusers at lists.iptel.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.iptel.org/mailman/listinfo/serusers
> or, via email, send a message with subject or body 'help' to
> serusers-request at lists.iptel.org
>
> You can reach the person managing the list at
> serusers-owner at lists.iptel.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Serusers digest..."
>
>
> Today's Topics:
>
> 1. SER not sending 486 Busy Here (Ravi *****)
> 2. Re: SER pre-release - PRESENCE ISSUES (SER LIST)
> 3. Suggestion (Eddie Johnson Jr)
> 4. SER pre-release - Presence and NOTIFY (SER LIST)
> 5. SER pre-release ser_ctl (SER LIST)
> 6. Re: SER pre-release ser_ctl (Alexandr Dubovikov)
> 7. Re: SER pre-release - PRESENCE ISSUES (Michal Matyska)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 11 Nov 2006 14:15:03 +0200
> From: "Ravi *****" <mravikreddy at gmail.com>
> Subject: [Serusers] SER not sending 486 Busy Here
> To: serusers at lists.iptel.org
> Message-ID:
> <cfbb389b0611110415l33701327vc3fd09fd9d571e10 at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi Users ,
>
> I am Using SER-0.96 , When I make a call from
> SER to Pstn it works fine I mean is all "INV"BYE"CAN".
>
> But when I recieved a call from Pstn I cannot cancel the call because
> X-lite is sending to pstn gateway 480 temp. service not available instead
> of 486 Busy Here.
>
> I am using default config. but I dont understand where
> it went wrong .
>
> Any Idea or help greatly appreciated
>
> Thank You.
> Regards,
> Ravi.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://lists.iptel.org/pipermail/serusers/attachments/20061111/e5ca6eaa/attachment-0001.htm
>
> ------------------------------
>
> Message: 2
> Date: Sat, 11 Nov 2006 19:35:55 -0500
> From: "SER LIST" <sergrp at hotmail.com>
> Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
> To: michal at iptel.org, serusers at lists.iptel.org
> Message-ID: <BAY22-F456BA0ACD074040D0775BCEF50 at phx.gbl>
> Content-Type: text/plain; format=flowed
>
> Thank you. But now when I use the new syntax lookup_domain("$fd",
> "@from.uri.host") OR
> lookup_domain("$td", "@ruri.host")
>
> I get the following error:
>
> ----------------------------
> /usr/local/sbin/ser[31115]: register_udomain(): Invalid table version (use
> ser_mysql.sh reinstall)
> /usr/local/sbin/ser[31115]: domain_fixup(): Error while registering domain
> /usr/local/sbin/ser[31115]: ERROR: fix_expr : fix_actions error
> -----------------------------
>
> And when I comment those lines, ser starts fine!!!
>
> Any suggestions.
>
> Thanks
>
>
>
> >From: Michal Matyska <michal at iptel.org>
> >To: serusers at lists.iptel.org
> >Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
> >Date: Fri, 10 Nov 2006 20:40:13 +0100
> >
> >You can find some ideas in the new ser.cfg (on CVS).
> >
> >It seems to be little bit inconsistent to have lookup_user("from") but
> >not lookup_domain("from"). I'd like to see either both or neither. :-)
> >
> >To set attr called "did" and load domain attrs (if allowed by modparam)
> >use:
> >lookup_domain("$fd", "@from.uri.host")
> >lookup_domain("$td", "@ruri.host")
> >
> >To set attr called "uid" use:
> >www_authenticate() - see new ser.cfg or
> >lookup_user("From") or lookup_user("$fu", "@from.uri")
> >
> >lookup_user("To") or lookup_user("$tu", "@to.uri")
> >lookup_user("Request-URI") or lookup_user("$tu", "@ruri")
> >
> >
> >To load attr for that user
> >load_attrs("$fu","$f.uid")
> >load_attrs("$tu","$t.uid")
> >
> >Michal
> >
> >On Fri, 2006-11-10 at 13:42 -0500, SER LIST wrote:
> > > Thank you. settig the xcap_root for the xcap module fixed the two errors
> > > relating to xcap_root.
> > >
> > > BUT I am still getting the two errors relating to the lookup_domain
> >command,
> > > namely:
> > >
> > > -------------------------------------
> > > ser: parse error (192,24-25): unknown command, missing loadmodule?
> > > ser: parse error (261,26-27): unknown command, missing loadmodule?
> > > ser: ERROR: bad config file (2 errors)
> > > ser startup failed
> > > ----------------------------------
> > >
> > > I am using the presence example file. The excerpt from my ser.cfg file
> >is (I
> > > have marked the LINES where the error occurs):
> > >
> > > ---- start ---
> > >
> > > loadmodule "/usr/local/lib/ser/modules/sl.so"
> > > loadmodule "/usr/local/lib/ser/modules/avp.so"
> > > loadmodule "/usr/local/lib/ser/modules/avpops.so"
> > > loadmodule "/usr/local/lib/ser/modules/tm.so"
> > > loadmodule "/usr/local/lib/ser/modules/rr.so"
> > > loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> > > loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> > > loadmodule "/usr/local/lib/ser/modules/registrar.so"
> > > loadmodule "/usr/local/lib/ser/modules/domain.so"
> > > loadmodule "/usr/local/lib/ser/modules/textops.so"
> > > loadmodule "/usr/local/lib/ser/modules/mysql.so"
> > > loadmodule "/usr/local/lib/ser/modules/dialog.so"
> > > loadmodule "/usr/local/lib/ser/modules/rls.so"
> > > loadmodule "/usr/local/lib/ser/modules/pa.so"
> > > loadmodule "/usr/local/lib/ser/modules/xcap.so"
> > > loadmodule "/usr/local/lib/ser/modules/presence_b2b.so"
> > > loadmodule "/usr/local/lib/ser/modules/uri.so"
> > > loadmodule "/usr/local/lib/ser/modules/uri_db.so"
> > > loadmodule "/usr/local/lib/ser/modules/fifo.so"
> > > loadmodule "/usr/local/lib/ser/modules/xmlrpc.so"
> > > loadmodule "/usr/local/lib/ser/modules/xlog.so"
> > > loadmodule "/usr/local/lib/ser/modules/auth.so"
> > > loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> > > loadmodule "/usr/local/lib/ser/modules/msilo.so"
> > >
> > >
> > > { LINES TRUNCATED}
> > >
> > >
> > > if (uri==myself) {
> > >
> > > if (!lookup_domain("To")) { <--------------------------
> > > LINE 192
> > >
> > > xlog("L_ERR", "Unknown domain to: %tu from:
> >%fu\n");
> > > route(1);
> > > break;
> > > }
> > >
> > > if (method=="SUBSCRIBE") {
> > > if (!t_newtran()) {
> > > sl_reply_error();
> > > break;
> > > };
> > >
> > >
> > > (lines truncated)
> > >
> > > if (lookup_domain("From")) { <---------------------- LINE 261
> > >
> > > if (lookup_user("From"))
> >{
> > >
> > > if
> > > (is_simple_rls_target("$uid-list")) {
> > > # log(1,
> >"it
> > > is simple subscription!\n");
> > > # takes
> >From
> > > UID and makes XCAP query for user's
> > > # list
> >named
> > > "default"
> > >
> > > if
> > > (!query_resource_list("default")) {
> > >
> > > t_reply("404", "No such user list");
> > >
> > > break;
> > > }
> > > }
> > > }
> > > }
> > >
> > > ----------- END ---------------------
> > >
> > > Any suggestions??
> > >
> > > THanks in advance
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > >From: samuel <samu60 at gmail.com>
> > > >To: "SER LIST" <sergrp at hotmail.com>
> > > >CC: serusers at iptel.org, serdev at iptel.org
> > > >Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
> > > >Date: Fri, 10 Nov 2006 10:14:17 +0100
> > > >
> > > >XCAP parameters where removed from rls and pa and a new module, called
> > > >xcap contains the xcap root so you have to delete pa and rls xcap
> > > >parameter, load the new module xcap.so and set the xcap_root parameter
> > > >of xcap module to the directory having the doc structure.
> > > >
> > > >About the lookup_domain, there can be a typo. Can you post the config
> > > >file syntax??
> > > >
> > > >Hope it helps!
> > > >
> > > >Samuel
> > > >
> > > >2006/11/10, SER LIST <sergrp at hotmail.com>:
> > > >>I installed the SER pre-release along w/ all modules. The problem is
> >that
> > > >>presence now does not run (it was working w/ the
> >presence-release-10.99).
> > > >>The errors I get are:
> > >
> > >>----------------------------------------------------------------------------------------------------------
> > > >>set_mod_param_regex: parameter <xcap_root> not found in module <rls>
> > > >>ser: parse error (82,20-21): Can't set module parameter
> > > >>set_mod_param_regex: parameter <auth_xcap_root> not found in module
> ><pa>
> > > >>parse error (97,20-21): Can't set module parameter
> > > >>ser: parse error (186,24-25): unknown command, missing loadmodule?
> > > >>parse error (255,26-27): unknown command, missing loadmodule?
> > > >>ERROR: bad config file (4 errors)
> > >
> > >>-------------------------------------------------------------------------------------------------------------
> > > >>I checked the pa module code and also the rls code and the parameters
> > > >>auth_xcap_root and xcap_root are NOT defined !!!!
> > > >>
> > > >>The error on line 185 and 255 refer to the "Lookup_domain" function. I
> > > >>verified that the domain module has been compiled and included in the
> > > >>ser.cfrg file
> > >
> > > _________________________________________________________________
> > > Ready for the world's first international mobile film festival
> >celebrating
> > > the creative potential of today's youth? Check out Mobile Jam Fest for
> >your
> > > a chance to WIN $10,000! www.mobilejamfest.com
> > >
> > > _______________________________________________
> > > Serusers mailing list
> > > Serusers at lists.iptel.org
> > > http://lists.iptel.org/mailman/listinfo/serusers
> >
> >_______________________________________________
> >Serusers mailing list
> >Serusers at lists.iptel.org
> >http://lists.iptel.org/mailman/listinfo/serusers
>
> _________________________________________________________________
> Say hello to the next generation of Search. Live Search try it now.
> http://www.live.com/?mkt=en-ca
>
>
>
> ------------------------------
>
> Message: 3
> Date: Sat, 11 Nov 2006 22:23:25 -0500
> From: "Eddie Johnson Jr" <ilo at ilo-infosystems.us>
> Subject: [Serusers] Suggestion
> To: <serusers at lists.iptel.org>
> Message-ID: <000501c70609$ec422a60$0300a8c0 at fiverings>
> Content-Type: text/plain; charset="us-ascii"
>
> I am new to setting up SER and this is the test setup.
>
>
>
> 1. DHCP running from router
>
> 2. SJ Phone on laptop 192.168.X.X
>
> 3. Grandstream Budgetone 101 192.168.X.X
>
> 4. SIP Express Router 192.168.X.X
>
> 5. Asterisk Server 192.168.X.X attached to tdm400p card is an analog phone
>
>
>
> Will this work internally? There is no connection to a telco.
>
> The SJ phone is showing the following: nat/firewall: Port Restricted Cone
> NAT
>
> SIP calls use outbound proxy: 192.168.X.X (SER)
>
> Will I have to register the SJ, Grandstream and Asterisk PBX?
>
>
>
> Ed
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://lists.iptel.org/pipermail/serusers/attachments/20061111/110a602c/attachment-0001.html
>
> ------------------------------
>
> Message: 4
> Date: Sat, 11 Nov 2006 23:22:34 -0500
> From: "SER LIST" <sergrp at hotmail.com>
> Subject: [Serusers] SER pre-release - Presence and NOTIFY
> To: serusers at iptel.org
> Message-ID: <BAY22-F7EF8C2DE63242B0126F89CEF50 at phx.gbl>
> Content-Type: text/plain; format=flowed
>
> Hi, I have SER Proxy and PRESENCE running on different machines. REGISTERS
> are being forwarded by SER Proxy to PRESENCE and PRESENCE is storing the
> location information in "location" db.
>
> What I am seeing is that when the PRESENCE Server sends NOTIFYs to watchers,
> it sends them to the SER PROXY (destination IP Is that of SER PROXY) but the
> URI in NOTIFY is that of the watchers LOCATION INFO. Is this correct? I
> would like the NOTIFY URI to contain the SIP DOMAIN and not the contact
> info.
>
> e.g. user 444 registers with SER PROXY (sip.xx.com). It is registering from
> 10.1.1.1:12321 (location info). SER PROXY sends the REGISTER TO Presence
> server which stores this info in location database (location is
> 444 at 10.1.1.1:12321). Now when Presence Server sends NOTIFY, it sends it to
> the SER PROXY IP BUT the NOTIFY URI IS:
>
> NOTIFY sip:444 at 10.1.1.1:12321 SIP/2.0
>
> How can I have the NOTIFY URI to be :
>
> NOTIFY sip:444 at sip.xx.com SIP/2.0
>
>
> Any suggestions would be higlhy appreciated.
>
> _________________________________________________________________
> Ready for the world's first international mobile film festival celebrating
> the creative potential of today's youth? Check out Mobile Jam Fest for your
> a chance to WIN $10,000! www.mobilejamfest.com
>
>
>
> ------------------------------
>
> Message: 5
> Date: Sun, 12 Nov 2006 00:47:15 -0500
> From: "SER LIST" <sergrp at hotmail.com>
> Subject: [Serusers] SER pre-release ser_ctl
> To: serusers at iptel.org
> Message-ID: <BAY22-F2269411124939F92DAE36ACEF50 at phx.gbl>
> Content-Type: text/plain; format=flowed
>
> Hello, When I try to run the ser_ctl command to do something like
>
> ser_ctl version or any other command, I get the error
>
> ser_ctl: (111, 'Connection refused'): error
>
>
> SER is running while I type the command.
>
> Any hints will be appreciated.
>
> _________________________________________________________________
> Buy, Load, Play. The new Sympatico / MSN Music Store works seamlessly with
> Windows Media Player. Just Click PLAY.
> http://musicstore.sympatico.msn.ca/content/viewer.aspx?cid=SMS_Sept192006
>
>
>
> ------------------------------
>
> Message: 6
> Date: Sun, 12 Nov 2006 10:23:27 +0100
> From: Alexandr Dubovikov <shurik at start4.info>
> Subject: Re: [Serusers] SER pre-release ser_ctl
> To: SER LIST <sergrp at hotmail.com>
> Cc: serusers at iptel.org
> Message-ID: <20061112092327.GA99428 at start4.info>
> Content-Type: text/plain; charset=koi8-r
>
> On Sun, Nov 12, 2006 at 12:47:15AM -0500, SER LIST wrote:
> > Hello, When I try to run the ser_ctl command to do something like
>
> Hi,
>
> >
> > ser_ctl version or any other command, I get the error
> >
> > ser_ctl: (111, 'Connection refused'): error
> >
>
> do you have read/write permissions to ser_socket ?
>
> try it with root.
>
> >
> > SER is running while I type the command.
> >
> > Any hints will be appreciated.
> >
> > _________________________________________________________________
>
> Wbr,
> --
> Alexandr Dubovikov * baron at iRC RusNet * mailto:shurik at start4.info
> AD1-UANIC * ICQ: 122351182 * http://www.start4.info
>
>
> ------------------------------
>
> Message: 7
> Date: Sun, 12 Nov 2006 11:47:22 +0100
> From: Michal Matyska <michal at iptel.org>
> Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
> To: SER LIST <sergrp at hotmail.com>, serusers at lists.iptel.org
> Message-ID: <1163328442.22177.10.camel at localhost>
> Content-Type: text/plain
>
> Yes, the db schema has changed a lot since 0.9.x. You'll need to create
> the new one using the ser_mysql.sh reinstall.
>
> Or if you have lot of data provisioned, wait a moment, upgrade script
> might be under construction.
>
> If you still want to try the new version, then run:
> ser_mysql.sh -n ser010 reinstall
> (it will create new database called ser010) and change db_url in your
> new ser.cfg to "mysql://ser:heslo@127.0.0.1/ser010".
>
>
> Michal
>
> On Sat, 2006-11-11 at 19:35 -0500, SER LIST wrote:
> > Thank you. But now when I use the new syntax lookup_domain("$fd",
> > "@from.uri.host") OR
> > lookup_domain("$td", "@ruri.host")
> >
> > I get the following error:
> >
> > ----------------------------
> > /usr/local/sbin/ser[31115]: register_udomain(): Invalid table version (use
> > ser_mysql.sh reinstall)
> > /usr/local/sbin/ser[31115]: domain_fixup(): Error while registering domain
> > /usr/local/sbin/ser[31115]: ERROR: fix_expr : fix_actions error
> > -----------------------------
> >
> > And when I comment those lines, ser starts fine!!!
> >
> > Any suggestions.
> >
> > Thanks
> >
> >
> >
> > >From: Michal Matyska <michal at iptel.org>
> > >To: serusers at lists.iptel.org
> > >Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
> > >Date: Fri, 10 Nov 2006 20:40:13 +0100
> > >
> > >You can find some ideas in the new ser.cfg (on CVS).
> > >
> > >It seems to be little bit inconsistent to have lookup_user("from") but
> > >not lookup_domain("from"). I'd like to see either both or neither. :-)
> > >
> > >To set attr called "did" and load domain attrs (if allowed by modparam)
> > >use:
> > >lookup_domain("$fd", "@from.uri.host")
> > >lookup_domain("$td", "@ruri.host")
> > >
> > >To set attr called "uid" use:
> > >www_authenticate() - see new ser.cfg or
> > >lookup_user("From") or lookup_user("$fu", "@from.uri")
> > >
> > >lookup_user("To") or lookup_user("$tu", "@to.uri")
> > >lookup_user("Request-URI") or lookup_user("$tu", "@ruri")
> > >
> > >
> > >To load attr for that user
> > >load_attrs("$fu","$f.uid")
> > >load_attrs("$tu","$t.uid")
> > >
> > >Michal
> > >
> > >On Fri, 2006-11-10 at 13:42 -0500, SER LIST wrote:
> > > > Thank you. settig the xcap_root for the xcap module fixed the two errors
> > > > relating to xcap_root.
> > > >
> > > > BUT I am still getting the two errors relating to the lookup_domain
> > >command,
> > > > namely:
> > > >
> > > > -------------------------------------
> > > > ser: parse error (192,24-25): unknown command, missing loadmodule?
> > > > ser: parse error (261,26-27): unknown command, missing loadmodule?
> > > > ser: ERROR: bad config file (2 errors)
> > > > ser startup failed
> > > > ----------------------------------
> > > >
> > > > I am using the presence example file. The excerpt from my ser.cfg file
> > >is (I
> > > > have marked the LINES where the error occurs):
> > > >
> > > > ---- start ---
> > > >
> > > > loadmodule "/usr/local/lib/ser/modules/sl.so"
> > > > loadmodule "/usr/local/lib/ser/modules/avp.so"
> > > > loadmodule "/usr/local/lib/ser/modules/avpops.so"
> > > > loadmodule "/usr/local/lib/ser/modules/tm.so"
> > > > loadmodule "/usr/local/lib/ser/modules/rr.so"
> > > > loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> > > > loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> > > > loadmodule "/usr/local/lib/ser/modules/registrar.so"
> > > > loadmodule "/usr/local/lib/ser/modules/domain.so"
> > > > loadmodule "/usr/local/lib/ser/modules/textops.so"
> > > > loadmodule "/usr/local/lib/ser/modules/mysql.so"
> > > > loadmodule "/usr/local/lib/ser/modules/dialog.so"
> > > > loadmodule "/usr/local/lib/ser/modules/rls.so"
> > > > loadmodule "/usr/local/lib/ser/modules/pa.so"
> > > > loadmodule "/usr/local/lib/ser/modules/xcap.so"
> > > > loadmodule "/usr/local/lib/ser/modules/presence_b2b.so"
> > > > loadmodule "/usr/local/lib/ser/modules/uri.so"
> > > > loadmodule "/usr/local/lib/ser/modules/uri_db.so"
> > > > loadmodule "/usr/local/lib/ser/modules/fifo.so"
> > > > loadmodule "/usr/local/lib/ser/modules/xmlrpc.so"
> > > > loadmodule "/usr/local/lib/ser/modules/xlog.so"
> > > > loadmodule "/usr/local/lib/ser/modules/auth.so"
> > > > loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> > > > loadmodule "/usr/local/lib/ser/modules/msilo.so"
> > > >
> > > >
> > > > { LINES TRUNCATED}
> > > >
> > > >
> > > > if (uri==myself) {
> > > >
> > > > if (!lookup_domain("To")) { <--------------------------
> > > > LINE 192
> > > >
> > > > xlog("L_ERR", "Unknown domain to: %tu from:
> > >%fu\n");
> > > > route(1);
> > > > break;
> > > > }
> > > >
> > > > if (method=="SUBSCRIBE") {
> > > > if (!t_newtran()) {
> > > > sl_reply_error();
> > > > break;
> > > > };
> > > >
> > > >
> > > > (lines truncated)
> > > >
> > > > if (lookup_domain("From")) { <---------------------- LINE 261
> > > >
> > > > if (lookup_user("From"))
> > >{
> > > >
> > > > if
> > > > (is_simple_rls_target("$uid-list")) {
> > > > # log(1,
> > >"it
> > > > is simple subscription!\n");
> > > > # takes
> > >From
> > > > UID and makes XCAP query for user's
> > > > # list
> > >named
> > > > "default"
> > > >
> > > > if
> > > > (!query_resource_list("default")) {
> > > >
> > > > t_reply("404", "No such user list");
> > > >
> > > > break;
> > > > }
> > > > }
> > > > }
> > > > }
> > > >
> > > > ----------- END ---------------------
> > > >
> > > > Any suggestions??
> > > >
> > > > THanks in advance
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > >From: samuel <samu60 at gmail.com>
> > > > >To: "SER LIST" <sergrp at hotmail.com>
> > > > >CC: serusers at iptel.org, serdev at iptel.org
> > > > >Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
> > > > >Date: Fri, 10 Nov 2006 10:14:17 +0100
> > > > >
> > > > >XCAP parameters where removed from rls and pa and a new module, called
> > > > >xcap contains the xcap root so you have to delete pa and rls xcap
> > > > >parameter, load the new module xcap.so and set the xcap_root parameter
> > > > >of xcap module to the directory having the doc structure.
> > > > >
> > > > >About the lookup_domain, there can be a typo. Can you post the config
> > > > >file syntax??
> > > > >
> > > > >Hope it helps!
> > > > >
> > > > >Samuel
> > > > >
> > > > >2006/11/10, SER LIST <sergrp at hotmail.com>:
> > > > >>I installed the SER pre-release along w/ all modules. The problem is
> > >that
> > > > >>presence now does not run (it was working w/ the
> > >presence-release-10.99).
> > > > >>The errors I get are:
> > > >
> > > >>----------------------------------------------------------------------------------------------------------
> > > > >>set_mod_param_regex: parameter <xcap_root> not found in module <rls>
> > > > >>ser: parse error (82,20-21): Can't set module parameter
> > > > >>set_mod_param_regex: parameter <auth_xcap_root> not found in module
> > ><pa>
> > > > >>parse error (97,20-21): Can't set module parameter
> > > > >>ser: parse error (186,24-25): unknown command, missing loadmodule?
> > > > >>parse error (255,26-27): unknown command, missing loadmodule?
> > > > >>ERROR: bad config file (4 errors)
> > > >
> > > >>-------------------------------------------------------------------------------------------------------------
> > > > >>I checked the pa module code and also the rls code and the parameters
> > > > >>auth_xcap_root and xcap_root are NOT defined !!!!
> > > > >>
> > > > >>The error on line 185 and 255 refer to the "Lookup_domain" function. I
> > > > >>verified that the domain module has been compiled and included in the
> > > > >>ser.cfrg file
> > > >
> > > > _________________________________________________________________
> > > > Ready for the world's first international mobile film festival
> > >celebrating
> > > > the creative potential of today's youth? Check out Mobile Jam Fest for
> > >your
> > > > a chance to WIN $10,000! www.mobilejamfest.com
> > > >
> > > > _______________________________________________
> > > > Serusers mailing list
> > > > Serusers at lists.iptel.org
> > > > http://lists.iptel.org/mailman/listinfo/serusers
> > >
> > >_______________________________________________
> > >Serusers mailing list
> > >Serusers at lists.iptel.org
> > >http://lists.iptel.org/mailman/listinfo/serusers
> >
> > _________________________________________________________________
> > Say hello to the next generation of Search. Live Search try it now.
> > http://www.live.com/?mkt=en-ca
>
>
>
> ------------------------------
>
> _______________________________________________
> Serusers mailing list
> Serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
>
> End of Serusers Digest, Vol 43, Issue 12
> ****************************************
>
More information about the sr-users
mailing list