[Serusers] Radius accounting - User-Name parameter in the Start Acct-Status-Type

[tzieleniewski]

Hi!

Is it possible to configure acc_radius in such a way that it will send a User-Name parameter in the Accounting Packet because now it doesn't:

rad_recv: Accounting-Request packet from host 127.0.0.1 port 32844, id=246, length=474
        SER-Attr = ""
        Acct-Session-Id = "6012E956-D8D3-2367-979B-753579FE59FF at 192.168.1.2"
        Sip-To-Tag = "572241288"
        SER-From = "tomix <sip:tomix at tezet.no-ip.org:7060>;tag=2020612254"
        SER-Flags = 8
        SER-Original-Request-ID = "sip:hellboy at tezet.no-ip.org"
        Sip-Method = "INVITE"
        Sip-Cseq = 20886
        Sip-Translated-Request-ID = "sip:hellboy at 192.168.1.10:5060"
        Sip-Source-IP-Address = 192.168.1.2
        Sip-From-Tag = "2020612254"
        SER-To = "<sip:hellboy at tezet.no-ip.org>;tag=572241288"
        SER-Digest-Username = "tomix"
        SER-Request-Timestamp = 1171023334
        Calling-Station-Id = "sip:tomix at tezet.no-ip.org:7060"
        Sip-Source-Port = 7060
        SER-Digest-Realm = "tezet.no-ip.org"
        Sip-Response-Code = 200
        Called-Station-Id = "sip:hellboy at tezet.no-ip.org"
        SER-Response-Timestamp = 1171023341
        Acct-Status-Type = Start
        Service-Type = IAPP-Register
        NAS-Port = 5060
        Acct-Delay-Time = 0
        NAS-IP-Address = 127.0.0.1

Cheers
Tomasz