[Serusers] Forwarding and mediaproxy

[Greger V. Teigre]

you should remove t_relay_to_udp, as well as the break and make sure 
that on return to failure_route you don't run more commands.
g-)

Shaun Hofer wrote:
> I tried making route just to house the commands, I call for both:
> route[7] {
> 	revert_uri();
> 	rewritehostport("202.168.41.218:5060");
> 	append_branch();
>  	t_relay_to_udp("202.168.41.218", "5060");
> 	break;
> }
>
> When I did this I found that it wouldn't work properly. I did play around with 
> putting something like use_mediaproxy and calling other routes but seemed 
> like they failed to be called correctly.  I'm thinking either I mediaproxy 
> all traffic before from the start or let rtp travel directly between UA and 
> Asterisk.
>
> On Wednesday 31 January 2007 18:21, you wrote:
>   
>> You could create a route and then call the route from failure_route. 
>> However, I'm not sure if that will work as the INVITE was already sent 
>> to the UA not responding. But try.
>> g-)
>>
>> Shaun Hofer wrote:
>>     
>>> Hi,
>>>
>>> I wish to forward busy and no answer calls to Asterisk, and have the RTP 
>>> stream go through mediaproxy. At the moment, some calls use mediaproxy and 
>>> some don't. If the call is not using mediaproxy to get it too. I have 
>>>       
> noticed 
>   
>>> that I can't call use_media_proxy() from failed route. I don't want to use 
>>> mediaproxy for every call between UA's, if not needed. Any suggestions on 
>>>       
> how 
>   
>>> I might be able to get calls to use mediaproxy if forwarded ?
>>>
>>> current fail route:
>>>
>>> failure_route[1] {
>>>         if (t_check_status("487")) {
>>>                 break;
>>>         };
>>>         if (isflagset(26) && t_check_status("486")) {
>>>                 avp_delete("s:fwdbusy");
>>>                 resetflag(26);
>>>                 revert_uri();
>>>                 rewritehostport("202.168.41.218:5060");
>>>                 append_branch();
>>>                 t_relay_to_udp("202.168.41.218", "5060");
>>>                 break;
>>>         };
>>>         if (isflagset(27) && t_check_status("408")) {
>>>                 avp_delete("s:fwdnoanswer");
>>>                 resetflag(27);
>>>  		revert_uri();
>>>                 rewritehostport("202.168.41.218:5060");
>>>                 append_branch();
>>>                 t_relay_to_udp("202.168.41.218", "5060");
>>>                 break;
>>> 	};
>>>         end_media_session();
>>> }
>>>
>>>
>>> Thanks
>>>   
>>>       
>
>   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20070201/a7222fbf/attachment.htm>