[Users] radius authentication

[Stefano Capitanio]

Hi,

i've configured also "servers" files.
i've also set:
modparam("auth_radius", "service_type", 6)
but i cannot set:
modparam("auth_radius","Sip-Session",15), it says "parameter 
<Sip-Session> not found in module <auth_radius>"

my dictionary file is:
#### Attributes ###
ATTRIBUTE User-Name                      1  string     # RFC2865, acc, 
auth_radius, avp_radius, group_radius, uri_radius
ATTRIBUTE Service-Type                   6  integer    # RFC2865, acc, 
auth_radius, avp_radius, group_radius, uri_radius
#ATTRIBUTE Called-Station-Id             30  string     # RFC2865, acc
#ATTRIBUTE Calling-Station-Id            31  string     # RFC2865, acc
#ATTRIBUTE Acct-Status-Type              40  integer    # RFC2865, acc
#ATTRIBUTE Acct-Session-Id               44  string     # RFC2865, acc
ATTRIBUTE Sip-Method                   101  integer    # Schulzrinne, acc
ATTRIBUTE Sip-Response-Code            102  integer    # Schulzrinne, acc
ATTRIBUTE Sip-Cseq                     103  string     # Schulzrinne, acc
ATTRIBUTE Sip-To-Tag                   104  string     # Schulzrinne, acc
ATTRIBUTE Sip-From-Tag                 105  string     # Schulzrinne, acc
ATTRIBUTE Sip-Translated-Request-URI   107  string     # Proprietary, acc
ATTRIBUTE Digest-Response              206  string     # Sterman, 
auth_radius
ATTRIBUTE Sip-Uri-User                 208  string     # Proprietary, 
auth_radius
ATTRIBUTE Sip-Group                    211  string     # Proprietary, 
group_radius
ATTRIBUTE Sip-Rpid                     213  string     # Proprietary, 
auth_radius
ATTRIBUTE SIP-AVP                      225  string     # Proprietary, 
avp_radius
ATTRIBUTE Digest-Realm                1063  string     # Sterman, 
auth_radius
ATTRIBUTE Digest-Nonce                1064  string     # Sterman, 
auth_radius
ATTRIBUTE Digest-Method               1065  string     # Sterman, 
auth_radius
ATTRIBUTE Digest-URI                  1066  string     # Sterman, 
auth_radius
ATTRIBUTE Digest-QOP                  1067  string     # Sterman, 
auth_radius
ATTRIBUTE Digest-Algorithm            1068  string     # Sterman, 
auth_radius
ATTRIBUTE Digest-Body-Digest          1069  string     # Sterman, 
auth_radius
ATTRIBUTE Digest-CNonce               1070  string     # Sterman, 
auth_radius
ATTRIBUTE Digest-Nonce-Count          1071  string     # Sterman, 
auth_radius
ATTRIBUTE Digest-User-Name            1072  string     # Sterman, 
auth_radius

### CISCO Vendor Specific Attributes ###
#VENDOR Cisco              9
#ATTRIBUTE Cisco-AVPair    1   string   Cisco           # VSA, auth_radius

### Acct-Status-Type Values ###
#VALUE Acct-Status-Type     Start             1         # RFC2866, acc
#VALUE Acct-Status-Type     Stop              2         # RFC2866, acc
VALUE Acct-Status-Type     Failed           15         # RFC2866, acc

### Service-Type Values ###
VALUE Service-Type         Call-Check       10         # RFC2865, uri_radius
VALUE Service-Type         Group-Check      12         # Proprietary, 
group_radius
VALUE Service-Type         Sip-Session      15         # Schulzrinne, 
acc, auth_radius
VALUE Service-Type         SIP-Caller-AVPs  30         # Proprietary, 
avp_radius
VALUE Service-Type         SIP-Callee-AVPs  31         # Proprietary, 
avp_radius

any idea?

raviprakash sunkara ha scritto:
> Can U Check the     servers in radiusclient dir.
> That host and key should match the Radiu server NASlist file or nas 
> tables and client.conf file
>
> modparam("auth_radius","Sip-Session",15);
>
> On 2/15/07, *Stefano Capitanio* <s.capitanio at caspur.it 
> <mailto:s.capitanio at caspur.it>> wrote:
>
>     Ciao!
>
>     I'm trying to authenticate using Radius.
>     I've installed radiusclient-ng 0.5.2
>     i've configured radiusclient.conf with the IP address of the
>     radius server.
>     I've configured SER with:
>     ...
>     modparam("auth_radius", "radius_config",
>     "/etc/radiusclient-ng/radiusclient.conf")
>     ...
>     if (method=="REGISTER") {
>     if (!radius_www_authorize(" example.it <http://example.it>")) {
>                                             www_challenge("example.it
>     <http://example.it>", "0");
>                                             exit;
>                             }
>     save("location");
>     }
>
>     but it doesn't work: there seem to be a problem in the client because
>     there is no IP Packet that goes out directed to the radius server...
>     in the log of SER  i have  no errors...
>
>     thank you for any help,
>     Stefano
>
>     _______________________________________________
>     Users mailing list
>     Users at openser.org <mailto:Users at openser.org>
>     http://openser.org/cgi-bin/mailman/listinfo/users
>
>
>
>
> -- 
> Thanks and Regards
> Ravi Prakash Sunkara
> ravi.sunkara at hyperion-tech.com <mailto:ravi.sunkara at hyperion-tech.com>
> M:+91 9985077535
> www.hyperion-tech.com <http://www.hyperion-tech.com>
> Client and Parent company :- www.august-networks.com 
> <http://www.august-networks.com>