[Users] How can i make my OpenSER server with presence module work properly with the db_text database?

Mon Feb 5 14:35:13 CET 2007

Hi,

Here is the SIP messages that i captured when OpenSER crashed.
After package number 312 (PUBLISH) OpenSER crashed.

No. Time Source Destination Protocol Info
303 395.082565 192.168.3.172 192.168.3.170 SIP
Request:REGISTER sip:192.168.3.170 sip:192.168.3.170
CSeq: 1 REGISTER
Expires: 60
User-Agent: X-Lite
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE,
SUBSCRIBE, INFO

No. Time Source Destination Protocol Info
304 395.086627 192.168.3.170 192.168.3.172 SIP
Status: 200 OK (1 bindings)
CSeq: 1 REGISTER
Server: OpenSer (1.2.0-dev14-notls (i386/linux))

No. Time Source Destination Protocol Info
305 395.393790 192.168.3.172 192.168.3.170 SIP
Request:SUBSCRIBE sip:Klaas at 192.168.3.170
CSeq: 1 SUBSCRIBE
Expires: 3600
Accept: application/watcherinfo+xml
Event: presence.winfo
User-Agent: X-Lite

No. Time Source Destination Protocol Info
306 395.393944 192.168.3.172 192.168.3.170 SIP
Request:SUBSCRIBE sip:Chelsea at 192.168.3.170
CSeq: 1 SUBSCRIBE
Expires: 3600
Accept: multipart/related, application/rlmi+xml, application/pidf+xml
Event: presence
User-Agent: X-Lite

No. Time Source Destination Protocol Info
307 395.394042 192.168.3.172 192.168.3.170 SIP/XML
Request:PUBLISH sip:Klaas at 192.168.3.170
CSeq: 1 PUBLISH
Expires: 3600
Content-Type: application/pidf+xml
User-Agent: X-Lite
Event: presence

No. Time Source Destination Protocol Info
308 395.397656 192.168.3.170 192.168.3.172 SIP
Status: 404 Not Found
CSeq: 1 SUBSCRIBE
Server: OpenSer (1.2.0-dev14-notls (i386/linux))

No. Time Source Destination Protocol Info
309 395.536895 192.168.3.170 192.168.3.172 SIP
Request:SUBSCRIBE sip:Klaas at 192.168.3.172:14188;rinstance=38756ac05409b128
CSeq: 1 SUBSCRIBE
Expires: 3600
User-Agent: X-Lite
Accept: application/watcherinfo+xml
Event: presence.winfo
P-hint: usrloc applied

No. Time Source Destination Protocol Info
310 395.638825 192.168.3.172 192.168.3.170 SIP
Status: 489 Event Package Not Supported
CSeq: 1 SUBSCRIBE
User-Agent: X-Lite

No. Time Source Destination Protocol Info
311 395.641067 192.168.3.170 192.168.3.172 SIP
Status: 489 Event Package Not Supported
CSeq: 1 SUBSCRIBE
User-Agent: X-Lite

No. Time Source Destination Protocol Info
312 395.946974 192.168.3.172 192.168.3.170 SIP/XML
Request:PUBLISH sip:Klaas at 192.168.3.170
CSeq: 1 PUBLISH
Expires: 3600
Content-Type: application/pidf+xml
User-Agent: X-Lite
Event: presence

No. Time Source Destination Protocol Info
313 395.949651 192.168.3.170 192.168.3.172 ICMP
Destination unreachable (Port unreachable)
Internet Control Message Protocol

Kinds regards,

Kc

On 2/5/07, Daniel-Constantin Mierla <daniel at voice-system.ro> wrote:
> Hello,
>
> presence.winfo should be supported. Cesc could you send some netork
> trace to watch a bit?
>
> The issue with strlen might be there. I will have a look in these days.
>
> Cheers,
> Daniel
>
>
> On 02/04/07 13:16, Nicolas Palix wrote:
> > Hi,
> >
> > "strange event package" .winfo is RFC3857
> >
> > A Watcher Information Event Template-Package for
> >                  the Session Initiation Protocol (SIP)
> >
> > http://www.ietf.org/rfc/rfc3857.txt
> >
> >
> > Le vendredi 02 février 2007 16:54, Cesc a écrit :
> >
> >> Hi,
> >>
> >> Just add something my colleague forgot to mention and i think it may help.
> >> This error happened after the phone sends a subscribe (or was it a
> >> publish?) message with a strange event package = presence.winfo (or
> >> something like this).
> >> The reaction of presence module (out of my head, so could be wrong) is
> >> to answer with a 484 Event package not known ...
> >> Then, after a while, a timer gets called which tries to clean the
> >> active watchers table ... and then ... pum! :) the seg fault here
> >> attached ...
> >>
> >> As you can see in the bt, the problem seems to be in strlen call ...
> >> probably the row_vals returned is null (?) ... and strlen I think is
> >> not very robust against this sort of perversions :)
> >>
> >>
> >>> 610 subs.event_id.len = strlen(row_vals[event_id_col].val.str_val.s);
> >>>
> >> Cesc
> >> PS - The work around seems to be to start openser with a clean
> >> (=empty) active_watchers dbtext file ...
> >>
> >> On 2/2/07, Kc Ayuba <kc.ayuba at gmail.com> wrote:
> >>
> >>> Hi,
> >>> I'm trying to use db_text database with the presence module of
> >>> OpenSER(1.2.x).
> >>> User agent is X-Lite(3.0). When I try to send a REGISTER message to
> >>> OpenSER, OpenSER still works.
> >>> But if i sent a SUBSCRIBE or a PUBLISH message, then openser crashes.
> >>> If i use the MySQL database, then everything works just fine. But i
> >>> prefer to use the db_text database.
> >>> Here is the core file that was generated when OpenSER crashed.
> >>>
> >>> Core generated:
> >>>
> >>> Program terminated with signal 11, Segmentation fault.
> >>> #0 0xa7ced659 in msg_active_watchers_clean (ticks=100, param=0x0) at
> >>> subscribe.c:610
> >>> 610 subs.event_id.len =
> >>> strlen(row_vals[event_id_col].val.str_val.s);
> >>> (gdb) bt
> >>> #0 0xa7ced659 in msg_active_watchers_clean (ticks=100, param=0x0) at
> >>> subscribe.c:610
> >>> #1 0x080a3f6c in timer_ticker () at timer.c:141
> >>> #2 0x0806b51f in main_loop () at main.c:724
> >>> #3 0x0806d43b in main (argc=3, argv=0xaff0a2e4) at main.c:1438
> >>> (gdb) frame 0
> >>> #0 0xa7ced659 in msg_active_watchers_clean (ticks=100, param=0x0) at
> >>> subscribe.c:610
> >>> 610 subs.event_id.len =
> >>> strlen(row_vals[event_id_col].val.str_val.s);
> >>> (gdb) list
> >>> 605
> >>> 606 subs.from_domain.s =
> >>> row_vals[from_domain_col].val.str_val.s;
> >>> 607 subs.from_domain.len =
> >>> strlen(row_vals[from_domain_col].val.str_val.s);
> >>> 608
> >>> 609 subs.event_id.s = row_vals[event_id_col].val.str_val.s;
> >>> 610 subs.event_id.len =
> >>> strlen(row_vals[event_id_col].val.str_val.s);
> >>> 611
> >>> 612 subs.to_tag.s = row_vals[to_tag_col].val.str_val.s;
> >>> 613 subs.to_tag.len =
> >>> strlen(row_vals[to_tag_col].val.str_val.s);
> >>> 614
> >>> (gdb)
> >>> 615 subs.from_tag.s = row_vals[from_tag_col].val.str_val.s;
> >>> 616 subs.from_tag.len =
> >>> strlen(row_vals[from_tag_col].val.str_val.s);
> >>> 617
> >>> 618 subs.callid.s = row_vals[callid_col].val.str_val.s;
> >>> 619 subs.callid.len =
> >>> strlen(row_vals[callid_col].val.str_val.s);
> >>> 620
> >>> 621 subs.contact.s = row_vals[contact_col].val.str_val.s;
> >>> 622 subs.contact.len =
> >>> strlen(row_vals[contact_col].val.str_val.s);
> >>> 623
> >>> 624 subs.cseq = row_vals[cseq_col].val.int_val;
> >>>
> >>>
> >>> I really hope that someone can help me with this problem. Thanks in
> >>> advance.
> >>>
> >>> Kind regards,
> >>>
> >>> Kc
> >>> _______________________________________________
> >>> Users mailing list
> >>> Users at openser.org
> >>> http://openser.org/cgi-bin/mailman/listinfo/users
> >>>
> >> _______________________________________________
> >> Users mailing list
> >> Users at openser.org
> >> http://openser.org/cgi-bin/mailman/listinfo/users
> >>
> >
> >
>
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>