[OpenSER-Users] starting openser trunk version

Patrick Baker pbaker at adeptra.com
Fri Dec 7 17:49:33 CET 2007


Interestingly enough, I'm not sure why asterisk is telling SER to respond to the public IP??  When I commented out externip, everything works as it should, but this will obviously break external SIP clients!  Does anyone else have an issue like this?

### ASTERISK CONFIG ### 1.4 SVN HEAD

[general]
matchexterniplocally=yes
canreinvite=no
externip=xxx.206.xxx.136
localnet=10.3.1.0/255.255.255.0
context=default                 ; Default context for incoming calls
bindport=5061                   ; UDP Port to bind to (SIP standard port is 5060)
bindaddr=0.0.0.0                ; IP address to bind to (0.0.0.0 binds to all)
sipdebug=yes                    ; Turn on SIP debugging by default, from
nat=no

[openser]
type=friend
context=default
insecure=very
externalnotify=yes
allow=all
host=10.3.1.31

Sip Client = 10.3.1.115
OpenSer = 10.3.1.31:5060
Asterisk = 10.3.1.31:5061
Outside IP (NAT) = xxx.206.xxx.136


|Time     | 10.3.1.115        | 10.3.1.31         | xxx.206.xxx.136   |
|6.791    |         Request: INVITE sip           |                   |SIP/SDP: Request: INVITE sip:500 at 10.3.1.31, with session description
|         |(5060)   ------------------>  (5060)   |                   |
|6.791    |         Status: 100 Trying            |                   |SIP: Status: 100 Trying
|         |(5060)   <------------------  (5060)   |                   |
|6.791    |         Status: 407 Proxy A           |                   |SIP: Status: 407 Proxy Authentication Required
|         |(5060)   <------------------  (5060)   |                   |
|6.794    |         Request: ACK sip:50           |                   |SIP: Request: ACK sip:500 at 10.3.1.31
|         |(5060)   ------------------>  (5060)   |                   |
|6.799    |         Request: INVITE sip           |                   |SIP/SDP: Request: INVITE sip:500 at 10.3.1.31, with session description
|         |(5060)   ------------------>  (5060)   |                   |
|6.800    |         Status: 100 Trying            |                   |SIP: Status: 100 Trying
|         |(5060)   <------------------  (5060)   |                   |
|6.803    |         Status: 200 OK, wit           |                   |SIP/SDP: Status: 200 OK, with session description
|         |(5060)   <------------------  (5060)   |                   |
|6.817    |         Request: ACK sip:50           |                   |SIP: Request: ACK sip:500 at xxx.206.xxx.136
|         |(5060)   ------------------>  (5060)   |                   |
|6.817    |                   |         Request: ACK sip:50           |SIP: Request: ACK sip:500 at xxx.206.xxx.136
|         |                   |(5060)   ------------------>  (5060)   |
|7.804    |         Status: 200 OK, wit           |                   |SIP/SDP: Status: 200 OK, with session description
|         |(5060)   <------------------  (5060)   |                   |
|7.806    |         Request: ACK sip:50           |                   |SIP: Request: ACK sip:500 at xxx.206.xxx.136
|         |(5060)   ------------------>  (5060)   |                   |
|7.807    |                   |         Request: ACK sip:50           |SIP: Request: ACK sip:500 at xxx.206.xxx.136
|         |                   |(5060)   ------------------>  (5060)   |
|8.803    |         Status: 200 OK, wit           |                   |SIP/SDP: Status: 200 OK, with session description
|         |(5060)   <------------------  (5060)   |                   |
|8.805    |         Request: ACK sip:50           |                   |SIP: Request: ACK sip:500 at xxx.206.xxx.136
|         |(5060)   ------------------>  (5060)   |                   |
|8.805    |                   |         Request: ACK sip:50           |SIP: Request: ACK sip:500 at xxx.206.xxx.136
|         |                   |(5060)   ------------------>  (5060)   |
|10.803   |         Status: 200 OK, wit           |                   |SIP/SDP: Status: 200 OK, with session description
|         |(5060)   <------------------  (5060)   |                   |
|10.806   |         Request: ACK sip:50           |                   |SIP: Request: ACK sip:500 at xxx.206.xxx.136
|         |(5060)   ------------------>  (5060)   |                   |
|10.807   |                   |         Request: ACK sip:50           |SIP: Request: ACK sip:500 at xxx.206.xxx.136
|         |                   |(5060)   ------------------>  (5060)   |
|14.803   |         Status: 200 OK, wit           |                   |SIP/SDP: Status: 200 OK, with session description
|         |(5060)   <------------------  (5060)   |                   |
|14.805   |         Request: ACK sip:50           |                   |SIP: Request: ACK sip:500 at xxx.206.xxx.136
|         |(5060)   ------------------>  (5060)   |                   |
|14.806   |                   |         Request: ACK sip:50           |SIP: Request: ACK sip:500 at xxx.206.xxx.136
|         |                   |(5060)   ------------------>  (5060)   |
|18.803   |         Status: 200 OK, wit           |                   |SIP/SDP: Status: 200 OK, with session description
|         |(5060)   <------------------  (5060)   |                   |
|18.806   |         Request: ACK sip:50           |                   |SIP: Request: ACK sip:500 at xxx.206.xxx.136
|         |(5060)   ------------------>  (5060)   |                   |
|18.806   |                   |         Request: ACK sip:50           |SIP: Request: ACK sip:500 at xxx.206.xxx.136
|         |                   |(5060)   ------------------>  (5060)   |
|22.802   |         Status: 200 OK, wit           |                   |SIP/SDP: Status: 200 OK, with session description
|         |(5060)   <------------------  (5060)   |                   |
|22.805   |         Request: ACK sip:50           |                   |SIP: Request: ACK sip:500 at xxx.206.xxx.136
|         |(5060)   ------------------>  (5060)   |                   |
|22.805   |                   |         Request: ACK sip:50           |SIP: Request: ACK sip:500 at xxx.206.xxx.136
|         |                   |(5060)   ------------------>  (5060)   |
|38.046   |         Request: BYE sip:50           |                   |SIP: Request: BYE sip:500 at xxx.206.xxx.136
|         |(5060)   ------------------>  (5060)   |                   |
|38.046   |                   |         Request: BYE sip:50           |SIP: Request: BYE sip:500 at xxx.206.xxx.136
|         |                   |(5060)   ------------------>  (5060)   |
|38.491   |                   |         Request: BYE sip:50           |SIP: Request: BYE sip:500 at xxx.206.xxx.136
|         |                   |(5060)   ------------------>  (5060)   |
|39.491   |                   |         Request: BYE sip:50           |SIP: Request: BYE sip:500 at xxx.206.xxx.136
|         |                   |(5060)   ------------------>  (5060)   |
|39.548   |         Request: BYE sip:50           |                   |SIP: Request: BYE sip:500 at xxx.206.xxx.136
|         |(5060)   ------------------>  (5060)   |                   |
|41.491   |                   |         Request: BYE sip:50           |SIP: Request: BYE sip:500 at xxx.206.xxx.136
|         |                   |(5060)   ------------------>  (5060)   |
|42.788   |         Request: BYE sip:50           |                   |SIP: Request: BYE sip:500 at xxx.206.xxx.136
|         |(5060)   ------------------>  (5060)   |                   |
|45.494   |                   |         Request: BYE sip:50           |SIP: Request: BYE sip:500 at xxx.206.xxx.136
|         |                   |(5060)   ------------------>  (5060)   |
|49.495   |                   |         Request: BYE sip:50           |SIP: Request: BYE sip:500 at xxx.206.xxx.136
|         |                   |(5060)   ------------------>  (5060)   |


-----Original Message-----
From: users-bounces at lists.openser.org on behalf of Daniel Grotti
Sent: Thu 12/6/2007 10:32 AM
To: Henning Westerholt
Cc: users at lists.openser.org
Subject: Re: [OpenSER-Users] starting openser trunk version
 
thanks!
daniel

Henning Westerholt wrote:
> On Thursday 06 December 2007, Daniel wrote:
>   
>> I'm using the latest trunk version of openser.
>> When I start the proxy I see on debug this messages repeated forever...
>> I'm using a config file that worked well wiht openser release 1.2.2.
>>
>> Dec  6 15:55:14 [28924] DBG:core:qm_free: params(0x817ada0, 0x81caa24),
>> called from nathelper.c: nh_timer(2941)
>> Dec  6 15:55:14 [28924] DBG:core:qm_free: freeing frag. 0x81caa0c alloc'ed
>> from nathelper.c: nh_timer(2841)
>> Dec  6 15:55:15 [28924] DBG:core:qm_malloc: params (0x817ada0, 8), called
>> from nathelper.c: nh_timer(2841)
>> Dec  6 15:55:15 [28924] DBG:core:qm_malloc: params (0x817ada0, 8), returns
>> address 0x81caa24 frag. 0x81caa0c (size=8) on 1 -th hit
>>     
>
> Hi Daniel,
>
> this is the (harmless) memory debugging that was activated to catch some 
> errors in memory management. This will be decativated next week, when 1.3 is 
> released. So you can either deactivate it by yourself (look in 
> Makefile.defs), ignore the messages or wait one week. ;-)
>
> Cheers,
>
> Henning
>
>   

-- 

---------------------------------------------------
Daniel Grotti
DEIS - University of Bologna
Via Venezia, 52 - 47023 Cesena (FC) - ITALY

Contacts
e-mail : daniel.grotti at unibo.it
Skype name : Daniel Grotti
---------------------------------------------------


_______________________________________________
Users mailing list
Users at lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users





More information about the sr-users mailing list