[OpenSER-Users] Not connection from public IP

[ram]

On 8/18/07, Arya <arya6000 at gmail.com> wrote:
>
> Hi guys
>
> I'm new to OpenSER so I used a article to install and configure it, I was
> able to connect to it from my lan, but it never works from my public IP.
> This is the tutorila I used:
> http://www.oldskoolphreak.com/tfiles/voip/beginners_openser.txt  I
> forwarded port 5060 to the server but its no use. I also tried this on two
> diffrent ISPs with the same result. Is there anything that I need to change
> in the configuration to make it accept connections from a public IP?
>

Hi

suggest you to post your config

and

use ngrep to capture the network trace

ram
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20070819/b7c42fa5/attachment.htm>