[Serusers] problem with compiling the new CVS release

İlker Aktuna (Koç.net) ilkera at koc.net
Mon Apr 2 16:58:23 CEST 2007


I tried but they are completely different.
Besides, this new file has extra configuration which I can not support, such as TLS.

Can anybody send me a simple configuration for NAT + mediaproxy on the new Ser build ?

Thanks,
ilker

-----Original Message-----
From: serusers-bounces at lists.iptel.org [mailto:serusers-bounces at lists.iptel.org] On Behalf Of İlker Aktuna (Koç.net)
Sent: Monday, April 02, 2007 4:54 PM
To: Ladislav Andel
Cc: serusers at iptel.org
Subject: RE: [Serusers] problem with compiling the new CVS release

Thank you.
I will check that configuration. In fact, I use mediaproxy instead of RTP proxy.
So maybe I can optimize it for mediaproxy.

Thanks,
ilker 

-----Original Message-----
From: Ladislav Andel [mailto:ladaan at iptel.org]
Sent: Monday, April 02, 2007 4:52 PM
To: İlker Aktuna (Koç.net)
Cc: serusers at iptel.org
Subject: Re: [Serusers] problem with compiling the new CVS release

Hi İlker,
there is no simple config out yet. Look at http://www.iptel.org/ser/howtos/optimizing_the_use_of_rtp_proxy
In this document it is more complex but you might be able to see how to configure it for simple setup.
I'm author of the document and am preparing a new revision which will be out soon. I will include a simple config too.

Lada

İlker Aktuna (Koç.net) napsal(a):
> Hi Lada,
>
> Thanks for your reply.
> In my sample configuration I have the following line which is rejected by the registrar module.
>
> modparam("registrar", "nat_flag", 6)
>
> I got the sample from :  
> http://siprouter.onsip.org/doc/gettingstarted/ch08.html
>
> What can I use instead of this line ?
> If a newer configuration is needed, can you point me to a simple configuration which is specially created for NAT clients with mediaproxy.
>
> Kind Regards,
> ilker
>
> -----Original Message-----
> From: Ladislav Andel [mailto:ladaan at iptel.org]
> Sent: Monday, April 02, 2007 2:48 PM
> To: İlker Aktuna (Koç.net)
> Cc: Vaclav Kubart; serusers at iptel.org
> Subject: Re: [Serusers] problem with compiling the new CVS release
>
> In Ottendorf registrar module are parameters:   save_nat_flag and 
> load_nat_flag
>
> in ser.cfg it could be defined for example:
>
> modparam("registrar", "save_nat_flag", "FLAG_NAT_UAC") 
> modparam("registrar", "load_nat_flag", "FLAG_NAT_UAS")
>
> Lada
>
>
> İlker Aktuna (Koç.net) wrote:
>   
>> Thanks, by excluding some modules (unixsock postgres bdb oracle osp) it compiles now.
>> However, this version also does not include the "nat_flag" parameter in module registrar:
>>
>>  0(5917) set_mod_param_regex: parameter <nat_flag> not found in 
>> module <registrar>
>>
>> Where can I find a version which supports this parameter and can be compiled ?
>>
>> Regards,
>> ilker
>>
>>
>> -----Original Message-----
>> From: Vaclav Kubart [mailto:vaclav.kubart at iptel.org]
>> Sent: Monday, April 02, 2007 1:54 PM
>> To: İlker Aktuna (Koç.net)
>> Cc: Jan Janak; serusers at iptel.org
>> Subject: Re: [Serusers] problem with compiling the new CVS release
>>
>> Hi Ilker,
>> try to add parameter exclude_modules="bdb" when running make.
>>
>> 	Vaclav
>>
>> On Mon, Apr 02, 2007 at 01:47:27PM +0300, ?lker Aktuna (Koç.net) wrote:
>>   
>>     
>>>  
>>> Hi Michal and Jan,
>>>
>>> I tried it with also "-D 20070328" parameter.
>>> This time it does not compile:
>>>
>>>
>>>
>>> make[1]: Entering directory `/root/yeni/sip_router/modules/bdb'
>>> gcc -shared  -Wl,-O2 -Wl,-E   bdb_api.o bdb_base.o bdb.o bdb_rval.o bdb_sval.o bdb_uval.o bdb_val.o   -L/usr/local/lib -ldb-4.4   -o bdb.so
>>> /usr/bin/ld: cannot find -ldb-4.4
>>> collect2: ld returned 1 exit status
>>> make[1]: *** [bdb.so] Error 1
>>> make[1]: Leaving directory `/root/yeni/sip_router/modules/bdb'
>>> make: *** [modules] Error 1
>>> #
>>>
>>> What now ?
>>>
>>> Thanks,
>>> ilker
>>>
>>> -----Original Message-----
>>> From: serusers-bounces at lists.iptel.org 
>>> [mailto:serusers-bounces at lists.iptel.org] On Behalf Of ?lker Aktuna
>>> (Koç.net)
>>> Sent: Monday, April 02, 2007 1:11 PM
>>> To: Jan Janak
>>> Cc: serusers at iptel.org
>>> Subject: RE: [Serusers] problem with compiling the new CVS release
>>>
>>> Hi Jan,
>>>
>>> This one compiles but does not have the "nat_flag" parameter in registrar module.
>>> Should I try with this :
>>> "cvs -d :pserver:anonymous at cvs.berlios.de:/cvsroot/ser checkout -D 20070328 sip_router"
>>>
>>> Thanks,
>>> ilker
>>>
>>> -----Original Message-----
>>> From: serusers-bounces at lists.iptel.org 
>>> [mailto:serusers-bounces at lists.iptel.org] On Behalf Of ?lker Aktuna
>>> (Koç.net)
>>> Sent: Monday, April 02, 2007 10:51 AM
>>> To: Jan Janak
>>> Cc: serusers at iptel.org
>>> Subject: RE: [Serusers] problem with compiling the new CVS release
>>>
>>>  
>>> Thank you,
>>>
>>> Trying right now...
>>>
>>>
>>> -----Original Message-----
>>> From: Jan Janak [mailto:jan at iptel.org]
>>> Sent: Monday, April 02, 2007 10:08 AM
>>> To: ?lker Aktuna (Koç.net)
>>> Cc: Michal Matyska; serusers at iptel.org
>>> Subject: Re: [Serusers] problem with compiling the new CVS release
>>>
>>> Hello,
>>>
>>> Get the code from the 2.0 branch:
>>>
>>> cvs -d :pserver:anonymous at cvs.berlios.de:/cvsroot/ser checkout -r 
>>> rel_2_0_0 sip_router
>>>
>>>   Jan.
>>>
>>> ?lker Aktuna (Koç.net) wrote:
>>>     
>>>       
>>>> Hi Michal,
>>>>
>>>> Thank you for your reply.
>>>> I didn't understand what to do. Should I add the option to the command "cvs -d :pserver:anonymous at cvs.berlios.de:/cvsroot/ser checkout sip_router" ?
>>>> I gues not, because it does not accept that parameter.
>>>>
>>>> What should I do now ?
>>>> Should I download a stable version ? Where can I find a stable version with presence support ?
>>>>
>>>> In fact, I only need the new registrar module which includes "nat_flag" parameter.
>>>> But when I just add the new registrar module to my old sources, I can't compile it.
>>>>
>>>> Thanks,
>>>> ilker
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: Michal Matyska [mailto:michal at iptel.org]
>>>> Sent: Saturday, March 31, 2007 10:01 PM
>>>> To: ?lker Aktuna (Koç.net)
>>>> Cc: serusers at iptel.org
>>>> Subject: Re: [Serusers] problem with compiling the new CVS release
>>>>
>>>> Hi,
>>>>
>>>> Sorry for the inconvinience... checkout the CVS code before the DB API started to change (e.g. add -D 20070328 option to the cvs co command). 
>>>>
>>>> Until all modules will be changed and using new API, it won't compile for a while.
>>>>
>>>> Michal
>>>>
>>>> On Thu, 2007-03-29 at 11:48 +0200, Jan Janak wrote: 
>>>>       
>>>>         
>>>>> Folks,
>>>>>
>>>>> I have been working on a new database abstraction layer for SER 
>>>>> for a while and I'll start commiting it in CVS now. Please excuse 
>>>>> me if something is broken temporarily, this is a major improvement 
>>>>> that touches all modules that use the database. This change does 
>>>>> not affect Ottendorf, of course. The new DB layer will appear in
>>>>> 2.1
>>>>>
>>>>> The main objectives for doing major changes in the DB API are:
>>>>>
>>>>> 1) Better support for databases that are not based on SQL, like
>>>>>    Berkeley db, LDAP, and fas in-memory databases.
>>>>>
>>>>> 2) The new code will no more store fetch all data from the database
>>>>>    in one step, it will be possible to get the data row by row (common
>>>>>    problem in usrloc)
>>>>>
>>>>> 3) Support for queries over multiple databases with various strategies
>>>>>    (i.e. usrloc database can be partitioned).
>>>>>
>>>>> 4) Support for database failover (i.e. if the primary database fails
>>>>>    that SER can start using another one, which can be even of different
>>>>>    type, i.e. mysql->postgres)
>>>>>
>>>>> I provide you with more details and documentation later once the 
>>>>> first version is in CVS.
>>>>>
>>>>>     Jan.
_____________________________________________________________________________________________________________________________________________
Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa,  icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz  ve  tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz.  Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. 
This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential  information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however,  sender  cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence.
_____________________________________________________________________________________________________________________________________________



More information about the sr-users mailing list