[Users] Malformed Radius packet

[Edson]

Sorry...

The contents follows:

Radius Protocol
    Code: Accounting-Request (4)
    Packet identifier: 0x61 (97)
    Length: 128
    Authenticator: 22B8D8F7AEE79429749AED94FBC1874C
    Attribute Value Pairs
        AVP: l=6  t=Acct-Status-Type(40): Start(1)
        AVP: l=6  t=Service-Type(6): IAPP-Register(15)
        AVP: l=6  t=Unknown-Attribute(102): 000000C8
        AVP: l=6  t=Error-Cause(101): Unknown(1)
        [Not enough room in packet for AVP]

Looking on the dictionary, there is no attribute 102... neither error-cause
101 or attribute value of C8. Any ideas where they are?

Edson.


> -----Original Message-----
> From: Edson [mailto:4lists at gmail.com]
> Sent: terça-feira, 24 de abril de 2007 15:10
> To: 'Juha Heinanen'
> Cc: 'users at openser.org'
> Subject: RE: [Users] Malformed Radius packet
> 
> Humm....
> 
> This is what appears:
> 
> 
> Edson.
> ------
> "It wouldn't be sell if it were easy..." (myself)
> 
> 
> > -----Original Message-----
> > From: Juha Heinanen [mailto:jh at tutpro.com]
> > Sent: terça-feira, 24 de abril de 2007 14:51
> > To: Edson
> > Cc: users at openser.org
> > Subject: [Users] Malformed Radius packet
> >
> > Edson writes:
> >
> >  > Error: WARNING: Malformed RADIUS packet from host 127.0.0.1: packet
> >  > attributes do NOT exactly fill the packet
> >
> > can you repeat this error at will?  if so, check using wireshark how the
> > packet looks like.
> >
> > -- juha