[Users] Cisco/OpenSER called number issues after ENUM lookup

[Bogdan-Andrei Iancu]

Hi Luca,

if you cannot configure the Cisco GW to provide the original called 
number information, the logical solution is indeed to move the ENUM part 
on the proxy.

regards,
bogdan

Luca Corti wrote:
> Hello,
>
> I've got an AS5350 receiving calls on ISDN E1 and forwarding calls to
> OpenSER. At the moment ENUM translations are performed on the AS5350 and
> calls received by OpenSER already contain the correct SIP URIs.
>
> Unfortunately I verified that the called party number information is
> lost in the process and at the called side I cannot distinguish numbers
> if I associate multiple PSTN numbers to the same sip user.
>
> I guess this is Cisco's fault, since it should add a Remote-Party-ID of
> type "called" to the INVITE. Do I have to move ENUM mapping to OpenSER
> or is there a quicker solution?
>
> thanks
>
> Luca
>
>
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>
>