[Users] Cannot start openser 1.1

[Papadopoulos Georgios]

Hello Daniel,

Thank you for the response. Which is better, disabling epoll in openser,
or enabling epoll in the kernel?

George 

> -----Original Message-----
> From: Daniel-Constantin Mierla [mailto:daniel at voice-system.ro] 
> Sent: Wednesday, September 20, 2006 11:40 AM
> To: Papadopoulos Georgios
> Cc: users at openser.org
> Subject: Re: [Users] Cannot start openser 1.1
> 
> Seems that epoll was disabled from kernel. Is it right?
> 
> If yes, disable epoll at compilation:
> 
> make proper
> NO_EPOLL=1 make all
> NO_EPOLL=1 make install
> 
> 
> also, there are some escape in the replacement string of 
> avp_subst() which shouldn't.
> 
> Cheers,
> Daniel
> 
> 
> On 09/20/06 11:31, Papadopoulos Georgios wrote:
> > hello,
> >
> > After using OpenSer 1.0 successfully for about a year, I am 
> trying to 
> > migrate to 1.1. My configuration has not changed (except 
> for changes 
> > in the avp functions due to the new syntax). However I 
> cannot get the 
> > process started. Below you can see the output that I am getting. It 
> > seems like some poll function is missing.
> >
> > Any help will be very welcome. Thank you.
> >
> > George Papadopoulos
> >
> >
> > # uname -a
> > Linux Fury 2.6.17-gentoo-r8 #1 Fri Sep 15 16:47:15 EEST 
> 2006 sparc64 
> > sun4u TI UltraSparc II  (BlackBird) GNU/Linux
> >
> >
> > #
> >  0(17608) WARNING: fix_socket_list: could not rev. resolve 
> > 172.31.100.6
> >  0(17608) WARNING: fix_socket_list: could not rev. resolve 
> > 172.31.100.7
> >  0(17608) WARNING: fix_socket_list: could not rev. resolve 
> > 172.31.100.6
> >  0(17608) WARNING: fix_socket_list: could not rev. resolve 
> > 172.31.100.7 Listening on
> >              udp: 172.31.100.5 [172.31.100.5]:5060
> >              udp: 172.31.100.6 [172.31.100.6]:5060
> >              udp: 172.31.100.7 [172.31.100.7]:5060
> >              tcp: 172.31.100.5 [172.31.100.5]:5060
> >              tcp: 172.31.100.6 [172.31.100.6]:5060
> >              tcp: 172.31.100.7 [172.31.100.7]:5060
> > Aliases: 
> >              tcp: Fury:5060
> >              tcp: Fury.acn.gr:5060
> >              udp: Fury:5060
> >              udp: Fury.acn.gr:5060
> >              *: sip.altecnet.gr:*
> >              *: altecnet.gr:*
> >
> >  0(17608) init_tcp: using epoll_lt as the io watch method (auto
> > detected)
> >  0(0) INFO: statistics manager successfully initialized
> >  0(0) StateLess module - initializing
> >  0(0) TM - initializing...
> > Fury sbin #  0(0) Maxfwd module- initializing
> >  0(0) TextOPS - initializing
> >  0(0) AVPops - initializing
> >  0(0) permissions - initializing
> >  0(0) WARNING: File not found: /usr/local/etc/ser/permissions.allow
> >  0(0) Default allow file (/usr/local/etc/ser/permissions.allow) not 
> > found => empty rule set
> >  0(0) WARNING: File not found: /usr/local/etc/ser/permissions.deny
> >  0(0) Default deny file (/usr/local/etc/ser/permissions.deny) not 
> > found => empty rule set
> >  0(0) AUTH module - initializing
> >  0(0) AUTH_DB module - initializing
> >  0(0) subst_parser: WARNING: \* unknown escape in 
> > /(.*)/$avp(s:prefix)$avp(s:destname)\*\!\^$avp(s:destdomain)/
> >  0(0) subst_parser: WARNING: \! unknown escape in 
> > /(.*)/$avp(s:prefix)$avp(s:destname)\*\!\^$avp(s:destdomain)/
> >  0(0) subst_parser: WARNING: \^ unknown escape in 
> > /(.*)/$avp(s:prefix)$avp(s:destname)\*\!\^$avp(s:destdomain)/
> >  0(0) INFO:textops:hname_fixup: using hdr type (31) instead of 
> > <Remote-Party-ID>
> >  0(0) INFO:textops:hname_fixup: using hdr type (31) instead of 
> > <Remote-Party-ID>
> >  0(0) INFO: udp_init: SO_RCVBUF is initially 118784
> >  0(0) INFO: udp_init: SO_RCVBUF is finally 237568
> >  0(0) INFO: udp_init: SO_RCVBUF is initially 118784
> >  0(0) INFO: udp_init: SO_RCVBUF is finally 237568
> >  0(0) INFO: udp_init: SO_RCVBUF is initially 118784
> >  0(0) INFO: udp_init: SO_RCVBUF is finally 237568
> >  0(0) INFO: udp_init: SO_RCVBUF is initially 118784
> >  0(0) INFO: udp_init: SO_RCVBUF is finally 237568
> >  1(17622) INFO: fifo process starting: 17622
> > 15(17649) ERROR: init_epoll: epoll_create: Function not implemented 
> > [90]
> > 15(17649) ERROR: init_io_wait: epoll init failed
> > 15(17649) ERROR: tcp_receive_loop: exiting...16(17650) ERROR:
> > init_epoll: epoll_create: Function not implemented [90]
> > 16(17650) ERROR: init_io_wait: epoll init failed
> > 16(17650) ERROR: tcp_receive_loop: exiting...17(17651) ERROR:
> > init_epoll: epoll_create: Function not implemented [90]
> > 17(17651) ERROR: init_io_wait: epoll init failed
> > 17(17651) ERROR: tcp_receive_loop: exiting...18(17652) ERROR:
> > init_epoll: epoll_create: Function not implemented [90]
> > 18(17652) ERROR: init_io_wait: epoll init failed
> > 18(17652) ERROR: tcp_main_loop: exiting... 0(17610) child process 
> > 17649 exited normally, status=255
> >  0(17610) child process 17650 exited normally, status=255
> >  0(17610) child process 17651 exited normally, status=255
> >  0(17610) child process 17652 exited normally, status=255
> >  0(17610) INFO: terminating due to SIGCHLD
> >  1(17622) INFO: signal 15 received
> >  2(17623) INFO: signal 15 received
> >  3(17624) INFO: signal 15 received
> >  4(17625) INFO: signal 15 received
> > 14(17648) INFO: signal 15 received
> > 13(17642) INFO: signal 15 received
> > 12(17641) INFO: signal 15 received
> > 11(17640) INFO: signal 15 received
> > 10(17639) INFO: signal 15 received
> >  9(17638) INFO: signal 15 received
> >  8(17632) INFO: signal 15 received
> >  7(17631) INFO: signal 15 received
> >  6(17630) INFO: signal 15 received
> >  5(17629) INFO: signal 15 received
> >
> > Disclaimer
> > The information in this e-mail and any attachments is 
> confidential. It is intended solely for the attention and use 
> of the named addressee(s). If you are not the intended 
> recipient, or person responsible for delivering this 
> information to the intended recipient, please notify the 
> sender immediately. Unless you are the intended recipient or 
> his/her representative you are not authorized to, and must 
> not, read, copy, distribute, use or retain this message or 
> any part of it. E-mail transmission cannot be guaranteed to 
> be secure or error-free as information could be intercepted, 
> corrupted, lost, destroyed, arrive late or incomplete, or 
> contain viruses.
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users at openser.org
> > http://openser.org/cgi-bin/mailman/listinfo/users
> >
> >   
>