[Users] help with configuring openser on vmware

[Seema]

Hi,

result of openser -c -f openser.cfg says that config is ok.

root at ubuntu:/usr/local/etc/openser# openser -c -f openser.cfg
 0(7604) WARNING: fix_socket_list: could not rev. resolve 192.168.0.108
 0(7604) WARNING: fix_socket_list: could not rev. resolve 192.168.0.108
Listening on
             udp: 192.168.0.108 [192.168.0.108]:5060
             tcp: 192.168.0.108 [192.168.0.108]:5060
Aliases:

WARNING: no fork mode
config file ok, exiting...

here is the config file:

 $Id: openser.cfg,v 1.5 2005/10/28 19:45:33 bogdan_iancu Exp $
#
# simple quick-start config script
#

# ----------- global configuration parameters ------------------------

debug=4            # debug level (cmd line: -dddddddddd)
fork=no
log_stderror=yes    # (cmd line: -E)



/* Uncomment these lines to enter debugging mode
fork=no
log_stderror=yes
*/
check_via=no	# (cmd. line: -v)
dns=no          # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
listen=192.168.0.108
listen=127.0.0.1

port=5060
children=4
fifo="/tmp/openser_fifo"

#
# uncomment the following lines for TLS support
#disable_tls = 0
#listen = tls:your_IP:5061
#tls_verify = 1
#tls_require_certificate = 0
#tls_method = TLSv1
#tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem"
#tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem"
#tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database
#loadmodule "/usr/local/lib/openser/modules/mysql.so"

loadmodule "/usr/local/lib/openser/modules/sl.so"
loadmodule "/usr/local/lib/openser/modules/tm.so"
loadmodule "/usr/local/lib/openser/modules/rr.so"
loadmodule "/usr/local/lib/openser/modules/maxfwd.so"
loadmodule "/usr/local/lib/openser/modules/usrloc.so"
loadmodule "/usr/local/lib/openser/modules/registrar.so"
loadmodule "/usr/local/lib/openser/modules/textops.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "/usr/local/lib/openser/modules/auth.so"
#loadmodule "/usr/local/lib/openser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# -------------------------  request routing logic -------------------

# main routing logic

route{

	# initial sanity checks -- messages with
	# max_forwards==0, or excessively long requests
	if (!mf_process_maxfwd_header("10")) {
		sl_send_reply("483","Too Many Hops");
		exit;
	};

	if (msg:len >=  2048 ) {
		sl_send_reply("513", "Message too big");
		exit;
	};

	# we record-route all messages -- to make sure that
	# subsequent messages will go through our proxy; that's
	# particularly good if upstream and downstream entities
	# use different transport protocol
	if (!method=="REGISTER")
		record_route();

	# subsequent messages withing a dialog should take the
	# path determined by record-routing
	if (loose_route()) {
		# mark routing logic in request
		append_hf("P-hint: rr-enforced\r\n");
		route(1);
	};

	if (!uri==myself) {
		# mark routing logic in request
		append_hf("P-hint: outbound\r\n");
		# if you have some interdomain connections via TLS
		#if(uri=~"@tls_domain1.net") {
		#	t_relay_to_tls("IP_domain1","port_domain1");
		#	exit;
		#} else if(uri=~"@tls_domain2.net") {
		#	t_relay_to_tls("IP_domain2","port_domain2");
		#	exit;
		#}
		route(1);
	};

	# if the request is for other domain use UsrLoc
	# (in case, it does not work, use the following command
	# with proper names and addresses in it)
	if (uri==myself) {

		if (method=="REGISTER") {

			# Uncomment this if you want to use digest authentication
			#if (!www_authorize("openser.org", "subscriber")) {
			#	www_challenge("openser.org", "0");
			#	exit;
			#};

			save("location");
			exit;
		};

		lookup("aliases");
		if (!uri==myself) {
			append_hf("P-hint: outbound alias\r\n");
			route(1);
		};

		# native SIP destinations are handled using our USRLOC DB
		if (!lookup("location")) {
			sl_send_reply("404", "Not Found");
			exit;
		};
		append_hf("P-hint: usrloc applied\r\n");
	};

	route(1);
}


route[1] {
	# send it out now; use stateful forwarding as it works reliably
	# even for UDP2TCP
	if (!t_relay()) {
		sl_reply_error();
	};
	exit;
}



On 10/10/06, ram <talk2ram at gmail.com> wrote:
> Hi
>
> i recomend before you run
>
> try to see if the config is ok
>
> openser -c -f openser.cfg
>
> you get errors , kindly post them
>
> or post your config along with errors
>
> its easy to help
>
> Ram
>
>
> On 10/9/06, Seema <seema.p.a at gmail.com> wrote:
> >
> > I have ubuntu running on a vmware server on my windows machine. I have
> > installed openser on ubuntu. The network connection is bridged.
> > I have set listen=vmware's ip in openser.cfg
> >
> > When I start openser, it gives me a warning
> > fix_socket_list: cannot resolve (ip addressin cfg)
> >
> > I dont know if this is the cause of the problem, but I cannot register
> > a minisip client with the openser server. The client runs on my
> > windows m/c ,so its url is client at windowsip and its sip proxy address
> > is openser's ip.
> >
> > Ethereal shows me that the client is sending a request:register but it
> > seems to be getting a request:register back as well whereupon the
> > client replies with a icmp dest unreachable.
> >
> > I have no experience with voip, and would greatly appreciate any help.
> >
> > _______________________________________________
> > Users mailing list
> > Users at openser.org
> > http://openser.org/cgi-bin/mailman/listinfo/users
> >
>
>