[Serusers] auth_radius won't loaded

[Ericson Ferdinand Pasaribu]

Hello, I'm trying to buld a system of SER with radius support. I use
Redhat 9 and radiusclient-ng-0.5.2. In my system, I installed SER
0.9.5 and freeRADIUS 1.1.1.
I was able installing all of them succesfully. After I configure SER
to have the radius support, I get this error message when I try to
start SER:

 0(5071) ERROR: load_module: could not open module
</usr/local/lib/ser/modules/auth_radius.so>: libradiusclient-ng.so.2:
cannot open shared object file: No such file or directory
 0(5071) parse error (32,13-14): failed to load module
 0(5071) parse error (89,32-33): unknown command, missing loadmodule?

I have checked the SER modules in my system, and there is
auth_radius.so in /usr/local/lib/ser/modules. I also checked the
libradiusclient library, and there is libradiusclient-ng.so.2 in
/usr/local/lib.
I don't know what's wrong with my system. Below is my ser.cfg file. Is
there anybody that can give some help?


# ----------- global configuration parameters ------------------------

debug=3         # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no	# (cmd line: -E)

check_via=no	# (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

loadmodule "/usr/local/lib/ser/modules/mysql.so"

loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_radius.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode",   0)
modparam("usrloc", "db_mode", 2)

# -- auth params --
#
modparam("auth_radius", "radius_config",
"/usr/local/etc/radiusclient-ng/radiusclient.conf")
#
#modparam("auth_db", "calculate_ha1", yes)
#
#modparam("auth_db", "password_column", "password")
#

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# -------------------------  request routing logic -------------------

# main routing logic

route{

	if (!mf_process_maxfwd_header("10")) {
		sl_send_reply("483","Too Many Hops");
		break;
	};
	if (msg:len >=  2048 ) {
		sl_send_reply("513", "Message too big");
		break;
	};
	

	if (!method=="REGISTER") record_route();	

	if (loose_route()) {
		append_hf("P-hint: rr-enforced\r\n");
		route(1);
		break;
	};

	if (!uri==myself) {
		append_hf("P-hint: outbound\r\n");
		route(1);
		break;
	};

	if (uri==myself) {

		if (method=="REGISTER") {

			if (!www_authorize("bohr.ee.net", "subscriber")) {
				www_challenge("bohr.ee.net", "0");
				break;
			};

			save("location");
			break;
		};

		lookup("aliases");
		if (!uri==myself) {
			append_hf("P-hint: outbound alias\r\n");
			route(1);
			break;
		};

		if (!lookup("location")) {
			sl_send_reply("404", "Not Found");
			break;
		};
	};
	append_hf("P-hint: usrloc applied\r\n");
	route(1);
}

route[1]
{
	if (!t_relay()) {
		sl_reply_error();
	};
}