[Serusers] Ser start but no PID

[sip]

This is usually an indication that there was an error in the ser.cfg file.  If you look in the system messages log (/var/log/messages), it should give you more specific information about which error occurred. 

N.

On Tue, 9 May 2006 14:00:49 +0700, Linh Pham wrote
> Hi, I compile SER 0.9.6 from source on a computer running Fedora Core 4.
> I suppose make all, make install all go well as I can't see any warning or error.
> When I start ser, it seems normal but I can't find the pid with ps.
> [root at localhost ~]# serctl start
> 
> Starting SER : started pid(18726)
> [root at localhost ~]# ser
> Listening on
>              udp: 127.0.0.1 [127.0.0.1]:5060
>              udp: 192.168.1.4 [192.168.1.4]:5060
>              udp: 192.168.1.17 [192.168.1.17]:5060
>              tcp: 127.0.0.1 [127.0.0.1]:5060
>              tcp: 192.168.1.4 [192.168.1.4]:5060
>              tcp: 192.168.1.17 [192.168.1.17]:5060
> Aliases:
>              tcp: localhost:5060
>              tcp: localhost.localdomain:5060
>              udp: localhost:5060
>              udp: localhost.localdomain:5060
> 
> [root at localhost ~]# serctl stop
> Stopping SER : /usr/local/sbin/serctl: line 813: kill: (18726) - No such processstopped
> [root at localhost ~]#
> 
> How can I fix this so ser run normally?
> Thank you.
> -- 
> Best regards,
> 
> Linh Pham


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20060509/3730e9ea/attachment.htm>