[Serusers] unable to start SER
ram
talk2ram at gmail.com
Mon May 8 18:27:52 CEST 2006
Hi
as per your change
I have modidifed
when i give the command
[root at crm ser]# serctl start
Starting SER : PID file /var/run/ser.pid does not exist -- SER start failed
and when i check the message
May 8 22:02:28 crm /usr/local/sbin/ser[3732]: Maxfwd module- initializing
May 8 22:02:28 crm /usr/local/sbin/ser[3732]: table_version(): Invalid
number of rows received: 7, subscriber
May 8 22:02:28 crm /usr/local/sbin/ser[3732]: auth_db:str_fixup(): Error
while querying table version
May 8 22:02:28 crm /usr/local/sbin/ser[3732]: ERROR: fix_expr : fix_actions
error
my ser.cfg
[root at crm ser]# more ser.cfg
#
# $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
#debug=3 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode
fork=no
log_stderror=yes
*/
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
#children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (msg:len >= 2048 ) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
if (method!="REGISTER") {
record_route();
};
# subsequent messages withing a dialog should take the
# path determined by record-routing
if (loose_route()) {
# mark routing logic in request
append_hf("P-hint: rr-enforced\r\n");
route(1);
break;
};
if (uri!=myself) {
# mark routing logic in request
append_hf("P-hint: outbound\r\n");
route(1);
break;
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
if (!www_authorize("balajimail.com", "subscriber")) {
www_challenge(" balajimail.com", "0");
break;
};
save("location");
break;
};
lookup("aliases");
if (uri!=myself) {
append_hf("P-hint: outbound alias\r\n");
route(1);
break;
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
append_hf("P-hint: usrloc applied\r\n");
route(1);
}
route[1]
{
# send it out now; use stateful forwarding as it works reliably
# even for UDP2TCP
if (!t_relay()) {
sl_reply_error();
};
}
On 5/8/06, Andrey Kouprianov <andrey.kouprianov at gmail.com> wrote:
>
> Hi,
>
> There are some differences between ser 0.8.x and 0.9.x. One problem I
> see is with logical operators. For instance,
>
> if (!method=="REGISTER") record_route();
>
> will now become
>
> if (method!="REGISTER") record_route();
>
> Anyway, I fixed your ser.cfg. Try starting SER with "serctl start"
> command (not just "ser"). Btw, get a document called Getting Started
> 05 from www.onsip.org (you'll need to register as well). This document
> is perfect for understanding how to start configuring SER from the
> very beginning to the complex stuff, like PSTN or NAT. Also, try using
> xlog module to log your messages. Helps a lot.
>
> Good luck :)
>
> -------------------------- your new ser.cfg below ------------------------
>
> #
> # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $
> #
> # simple quick-start config script
> #
>
> # ----------- global configuration parameters ------------------------
>
> #debug=3 # debug level (cmd line: -dddddddddd)
> fork=yes
> log_stderror=no # (cmd line: -E)
>
> /* Uncomment these lines to enter debugging mode
> fork=no
> log_stderror=yes
> */
>
> check_via=no # (cmd. line: -v)
> dns=no # (cmd. line: -r)
> rev_dns=no # (cmd. line: -R)
> port=5060
> #children=4
> fifo="/tmp/ser_fifo"
>
> # ------------------ module loading ----------------------------------
>
> # Uncomment this if you want to use SQL database
> loadmodule "/usr/local/lib/ser/modules/mysql.so"
>
> loadmodule "/usr/local/lib/ser/modules/sl.so"
> loadmodule "/usr/local/lib/ser/modules/tm.so"
> loadmodule "/usr/local/lib/ser/modules/rr.so"
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> loadmodule "/usr/local/lib/ser/modules/registrar.so"
> loadmodule "/usr/local/lib/ser/modules/textops.so"
>
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> loadmodule "/usr/local/lib/ser/modules/auth.so"
> loadmodule "/usr/local/lib/ser/modules/auth_db.so"
>
> # ----------------- setting module-specific parameters ---------------
>
> # -- usrloc params --
>
> #modparam("usrloc", "db_mode", 0)
>
> # Uncomment this if you want to use SQL database
> # for persistent storage and comment the previous line
> modparam("usrloc", "db_mode", 2)
>
> # -- auth params --
> # Uncomment if you are using auth module
> #
> modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which true in this config),
> # uncomment also the following parameter)
> #
> modparam("auth_db", "password_column", "password")
>
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
>
> # ------------------------- request routing logic -------------------
>
> # main routing logic
>
> route{
>
> # initial sanity checks -- messages with
> # max_forwards==0, or excessively long requests
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> break;
> };
> if (msg:len >= 2048 ) {
> sl_send_reply("513", "Message too big");
> break;
> };
>
>
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy; that's
> # particularly good if upstream and downstream entities
> # use different transport protocol
> if (method!="REGISTER") {
> record_route();
> };
>
> # subsequent messages withing a dialog should take the
> # path determined by record-routing
> if (loose_route()) {
> # mark routing logic in request
> append_hf("P-hint: rr-enforced\r\n");
> route(1);
> break;
> };
>
> if (uri!=myself) {
> # mark routing logic in request
> append_hf("P-hint: outbound\r\n");
> route(1);
> break;
> };
>
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following command
> # with proper names and addresses in it)
> if (uri==myself) {
>
> if (method=="REGISTER") {
>
> # Uncomment this if you want to use digest authentication
> if (!www_authorize("balajimail.com", "subscriber"))
> {
> www_challenge(" balajimail.com", "0");
> break;
> };
>
> save("location");
> break;
> };
>
> lookup("aliases");
> if (uri!=myself) {
> append_hf("P-hint: outbound alias\r\n");
> route(1);
> break;
> };
>
> # native SIP destinations are handled using our USRLOC DB
> if (!lookup("location")) {
> sl_send_reply("404", "Not Found");
> break;
> };
> };
> append_hf("P-hint: usrloc applied\r\n");
> route(1);
> }
>
> route[1]
> {
> # send it out now; use stateful forwarding as it works reliably
> # even for UDP2TCP
> if (!t_relay()) {
> sl_reply_error();
> };
> }
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20060508/eb9c7544/attachment.htm>
More information about the sr-users
mailing list