[Users] OpenSER dimensioning. How many calls/sec can it set up?

Bogdan-Andrei Iancu bogdan at voice-system.ro
Wed May 31 11:23:40 CEST 2006


Hi,

simple SIP-Proxy  refer to a simple config file, like the one provided 
by default by openser.
Performance will decrease once your script complexity increases.

but notice that if you do not use any kind of media relay, the proxy is 
not affected by the number of parallel calls since it;s transaction 
stateful and not dialog stateful....so you can have hundred of thousands 
of call in parallel with 0 load on the proxy.

regards,
bogdan

unplug wrote:

> What do you mean a 'simple' SIP-Proxy?
> Is it UA -- SIPproxy -- UA?
> I have also tested openser without using NAT  (All device is in the
> same network).  But the maximum number of current calls is only around
> 80.
> For the configuration file, I use those files download from
> http://www.onsip.org/.  I think they are the simple configuration that
> I can trust.
> Finally, just want to say the target usage of openser.  Does it target
> for a small group of users instead of a global voip environment?
>
>
> On 5/30/06, Edson <4lists at gmail.com> wrote:
>
>> My two cents:
>>
>> OpenSER/SER can handle hundreds of concurrent calls, but as a 'simple'
>> SIP-Proxy not as a media-proxy (RTP-Proxy). Your numbers would be 
>> clearer if
>> You could aggregate information on the loads only from OpenSER/SER, 
>> without
>> MediaProxy or RTPProxy. You would get some very impressive numbers,
>> unfortunately dropped by the [Media|RTP]proxy presence.
>>
>> Try to review Your configuration, so that You forward to media-aware 
>> servers
>> only calls that needed it (with one UA sitting behind a NAT 
>> box,p.ex.), not
>> all. It would give a 'little' more headache for design and 
>> maintenance, but
>> would permit a higher concurrent call number... ;)
>>
>> Edson.
>>
>> > -----Original Message-----
>> > From: users-bounces at openser.org [mailto:users-bounces at openser.org] On
>> > Behalf Of unplug
>> > Sent: segunda-feira, 29 de maio de 2006 22:23
>> > To: Juha Heinanen
>> > Cc: OpenSER-users
>> > Subject: Re: [Users] OpenSER dimensioning. How many calls/sec can 
>> it set
>> > up?
>> >
>> > You are right that you can have 10 servers installed mediaproxy to
>> > handle 300 concurrent calls.  However, it is not a practical way to
>> > implement a system to support several hundred concurrent calls using
>> > several servers.  As someone said, openser can handle several hundred
>> > calls, maybe thousand.  Comparing to my testing result, I have no idea
>> > the capacity of openser can handle.  Anyone can tell me the real
>> > capacity that openser can handle?
>> >
>> > On 5/29/06, Juha Heinanen <jh at tutpro.com> wrote:
>> > > unplug writes:
>> > >
>> > >  > mediaproxy spends much of the CPU to handle the call compared 
>> with
>> > >  > rtpproxy.  From the result that I made in the load test, the 
>> number
>> > of
>> > >  > concurrent call is much much less than we expected.
>> > >  > maximum concurrent call using mediaproxy (openser & mediaproxy 
>> in the
>> > >  > same server): 30
>> > >  > maximum concurrent call using rtpproxy (openser & rtpproxy in the
>> > same
>> > >  > server): 60
>> > >
>> > > you can distribute mediaproxy to as many host you want.  or are you
>> > > saying that mediaproxy module functions 
>> use_mediaproxy/end_mediaproxy
>> > > are the bottleneck?
>> > >
>> > > -- juha
>> > >
>> >
>> > _______________________________________________
>> > Users mailing list
>> > Users at openser.org
>> > http://openser.org/cgi-bin/mailman/listinfo/users
>>
>>
>
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>





More information about the sr-users mailing list