[Serusers] presence problem

[Rodrigo Gonzalez]

2 things....

		if (method=="SUBSCRIBE" || method=="PUBLISH") {
                        if (t_newtran()) {
                                handle_subscription("registrar");
				break;
                        };
                };       

handle_subscription is for SUBSCRIBE and handle_publish is for PUBLISH, so you need 2 if, one for SUBSCRIBE method and one for PUBLISH one.

Second, after fixing this, if you have any problems, please send the msgs to see the problem



queyeah at adinet.com.uy wrote:

>I read the SER presence handbook as you told me, I follow the 
>instructions to install ser with presence modules but i receive some 
>erros and modules wasn't installed.
>I go back to my old ser installation with pa module, configure some 
>lines in ser.gfc to handle subscribe but now I'm receiving an error to 
>SUSCRIBE and PUBLISH, it's like pa module can't process messages: 
>Status: 400 Bad Request (ethereal)
>
>this is my ser.cfg:
>
># ----------- global configuration parameters ------------------------
>
>#debug=3         # debug level (cmd line: -dddddddddd)
>#fork=yes
>#log_stderror=no	# (cmd line: -E)
>
>/* Uncomment these lines to enter debugging mode 
>fork=no
>log_stderror=yes
>*/
>
>check_via=no	# (cmd. line: -v)
>dns=no           # (cmd. line: -r)
>rev_dns=no      # (cmd. line: -R)
>#port=5060
>#children=4
>fifo="/tmp/ser_fifo"
>fifo_mode=666
>
># ------------------ module loading ----------------------------------
>
># Uncomment this if you want to use SQL database
>loadmodule "/usr/lib/ser/modules/mysql.so"
>
>loadmodule "/usr/lib/ser/modules/sl.so"
>loadmodule "/usr/lib/ser/modules/tm.so"
>loadmodule "/usr/lib/ser/modules/rr.so"
>loadmodule "/usr/lib/ser/modules/maxfwd.so"
>loadmodule "/usr/lib/ser/modules/usrloc.so"
>loadmodule "/usr/lib/ser/modules/registrar.so"
>loadmodule "/usr/lib/ser/modules/textops.so"
>
># Uncomment this if you want digest authentication
># mysql.so must be loaded !
>loadmodule "/usr/lib/ser/modules/auth.so"
>loadmodule "/usr/lib/ser/modules/auth_db.so"
>
>#esta linea la agrego para cargar el modulo de presencia.
>loadmodule "/usr/lib/ser/modules/pa.so"
>
>
># ----------------- setting module-specific parameters ---------------
>
># -- usrloc params --
>
>#modparam("usrloc", "db_mode", 0)
>modparam("usrloc", "db_mode",   2)
>modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser" )
>
>
># Uncomment this if you want to use SQL database 
># for persistent storage and comment the previous line
>modparam("usrloc", "db_mode", 2)
>
># -- auth params --
># Uncomment if you are using auth module
>#
>modparam("auth_db", "calculate_ha1", yes)
>#
># If you set "calculate_ha1" parameter to yes (which true in this 
>config), 
># uncomment also the following parameter)
>#
>modparam("auth_db", "password_column", "password")
>
># -- rr params --
># add value to ;lr param to make some broken UAs happy
>modparam("rr", "enable_full_lr", 1)
>
># -- pa params --
>modparam("pa","default_expires", 3600)
>modparam("pa","use_db",1)
>modparam("pa","db_url","mysql://ser:heslo@localhost/ser")
>
>
>
># -------------------------  request routing logic -------------------
>
># main routing logic
>
>route{
>
>	# initial sanity checks -- messages with
>	# max_forwards==0, or excessively long requests
>	if (!mf_process_maxfwd_header("10")) {
>		sl_send_reply("483","Too Many Hops");
>		break;
>	};
>	if (msg:len >=  2048 ) {
>		sl_send_reply("513", "Message too big");
>		break;
>	};
>	
>
>	# we record-route all messages -- to make sure that
>	# subsequent messages will go through our proxy; that's
>	# particularly good if upstream and downstream entities
>	# use different transport protocol
>	if (!method=="REGISTER") record_route();	
>
>	# subsequent messages withing a dialog should take the
>	# path determined by record-routing
>	if (loose_route()) {
>		# mark routing logic in request
>		append_hf("P-hint: rr-enforced\r\n"); 
>		route(1);
>		break;
>	};
>
>
>	if (!uri==myself) {
>		# mark routing logic in request
>		append_hf("P-hint: outbound\r\n"); 
>		route(1);
>		break;
>	};
>
>
>	# if the request is for other domain use UsrLoc
>	# (in case, it does not work, use the following command
>	# with proper names and addresses in it)
>	if (uri==myself) {
>
>		if (method=="REGISTER") {
>
>                        # Uncomment this if you want to use digest 
>authentication
>			if (!www_authorize("p2t.com", "subscriber")) {
>				www_challenge("p2t.com", "0");
>				break;
>			};
>
>			save("location");
>			break;
>		};
>		
>		if (method=="SUBSCRIBE" || method=="PUBLISH") {
>                        if (t_newtran()) {
>                                handle_subscription("registrar");
>				break;
>                        };
>                };        
>
>		lookup("aliases");
>		if (!uri==myself) {
>			append_hf("P-hint: outbound alias\r\n"); 
>			route(1);
>			break;
>		};
>
>		# native SIP destinations are handled using our USRLOC DB
>		if (!lookup("location")) {
>			sl_send_reply("404", "Not Found");
>			break;
>		};
>	};
>	append_hf("P-hint: usrloc applied\r\n"); 
>	route(1);
>}
>
>route[1] 
>{
>	# send it out now; use stateful forwarding as it works reliably
>	# even for UDP2TCP
>	if (!t_relay()) {
>		sl_reply_error();
>	};
>}
>
>
>
>
>Do you have any idea of what's happening???
>Thanks again...
>Gustavo.
>
>_______________________________________________
>Serusers mailing list
>serusers at lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
>
>  
>