[Serusers] Received Accounting-Request packet from 127.0.0.1 with invalid signature!
e ansah
ekansah at hotmail.com
Tue Mar 7 22:06:32 CET 2006
Hello All,
I really need you help, as I'm a virgin SER user.
I'm trying to setup radius accounting with SER and I'm getting the following
error:
Received Accounting-Request packet from 127.0.0.1 with invalid signature!
(Shared secret is incorrect.)
I've been able to setup radiusclient-ng to log accounting requests to
Freeradius installed on the same server. When I do the following, Freeradius
logs accounting requests:
radclient -f digest localhost acct testing123
However, when I try to get SER to log radius accounting, providing the "acc"
module the same client's configuration file, I get the error in Freeradius:
Received Accounting-Request packet from 127.0.0.1 with invalid signature!
(Shared secret is incorrect.)
Is there a way to log the password module acc retrieves from
radiusclient-ng?
I'm really at a loss. Here's output from calling radiusd:
=================================
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /etc/raddb/proxy.conf
Config: including file: /etc/raddb/clients.conf
Config: including file: /etc/raddb/snmp.conf
Config: including file: /etc/raddb/eap.conf
Config: including file: /etc/raddb/sql.conf
main: prefix = "/usr"
main: localstatedir = "/var"
main: logdir = "/var/log/radius"
main: libdir = "/usr/lib64"
main: radacctdir = "/var/log/radius/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/radius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/var/run/radiusd/radiusd.pid"
main: user = "radiusd"
main: group = "radiusd"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = yes
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/lib64
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = no
mschap: passwd = "(null)"
mschap: authtype = "MS-CHAP"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded DIGEST
Module: Instantiated digest (digest)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "/etc/shadow"
unix: group = "(null)"
unix: radwtmp = "/var/log/radius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "md5"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/etc/raddb/huntgroups"
preprocess: hints = "/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
files: usersfile = "/etc/raddb/users"
files: acctusersfile = "/etc/raddb/acct_users"
files: preproxy_usersfile = "/etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile =
"/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Initializing the thread pool...
thread: start_servers = 5
thread: max_servers = 32
thread: min_spare_servers = 3
thread: max_spare_servers = 10
thread: max_requests_per_server = 0
thread: cleanup_delay = 5
Thread spawned new child 1. Total threads in pool: 1
Thread spawned new child 2. Total threads in pool: 2
Thread 2 waiting to be assigned a request
Thread 1 waiting to be assigned a request
Thread spawned new child 3. Total threads in pool: 3
Thread 3 waiting to be assigned a request
Thread spawned new child 4. Total threads in pool: 4
Thread spawned new child 5. Total threads in pool: 5
Thread pool initialized
Listening on authentication *:1812
Listening on accounting *:1813
Listening on proxy *:1814
Ready to process requests.
Thread 4 waiting to be assigned a request
Thread 5 waiting to be assigned a request
Here are also snippets from ser.cfg
=============================
modparam("auth_db|permissions|uri_db|usrloc", "db_url",
"mysql://ser:mypass@localhost/ser")
modparam("auth_db", "calculate_ha1", 1)
modparam("auth_db", "password_column", "password")
modparam("nathelper", "rtpproxy_disable", 1)
modparam("nathelper", "natping_interval", 0)
modparam("mediaproxy","natping_interval", 30)
modparam("mediaproxy","mediaproxy_socket", "/var/run/mediaproxy.sock")
modparam("mediaproxy","sip_asymmetrics","/usr/local/etc/ser/sip-clients")
modparam("mediaproxy","rtp_asymmetrics","/usr/local/etc/ser/rtp-clients")
modparam("usrloc", "db_mode", 2)
modparam("registrar", "nat_flag", 6)
modparam("rr", "enable_full_lr", 1)
modparam("tm", "fr_inv_timer", 27)
modparam("tm", "fr_inv_timer_avp", "inv_timeout")
modparam("permissions", "db_mode", 1)
modparam("permissions", "trusted_table", "trusted")
# -- acc params for radius--
modparam("acc", "radius_config",
"/usr/local/etc/radiusclient-ng/radiusclient.conf")
modparam("acc", "radius_missed_flag", 2)
modparam("acc", "radius_flag", 1)
modparam("auth_radius", "radius_config",
"/usr/local/etc/radiusclient-ng/radiusclient.conf")
route {
# -----------------------------------------------------------------
# Sanity Check Section
# -----------------------------------------------------------------
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483", "Too Many Hops");
break;
};
if (msg:len > max_len) {
sl_send_reply("513", "Message Overflow");
break;
};
# mark all transactions for accounting
setflag(1);
[...]
Thanks in advance!
_________________________________________________________________
Don’t just search. Find. Check out the new MSN Search!
http://search.msn.click-url.com/go/onm00200636ave/direct/01/
More information about the sr-users
mailing list