[Users] openser with TLS

Joao Pereira joao.pereira at fccn.pt
Thu Mar 23 12:37:51 CET 2006


Yes, with "fork=no" I found the problem:

Segmentation fault (core dumped)

:P


Bogdan-Andrei Iancu wrote:

> Hi Joao,
>
> try yo start openser in foreground - set fork=no and log_stderror=yes 
> in your config. Maybe you will get a hint.
>
> regards,
> bogdan
>
> Joao Pereira wrote:
>
>> Yes, I did "ps fax" and there was no OpenSER.
>> How can I find the error? Even with a higher debug level, there are 
>> no errors in the stdout:
>> (debug level = 8)
>>
>> Listening on
>> Aliases:
>>             *: mex.fccn.pt:*
>>             *: XXX.XXX.XXX.XXX:*
>>
>> 0(22568) fm_malloc_init: F_OPTIMIZE=16384, /ROUNDTO=2048
>> 0(22568) fm_malloc_init: F_HASH_SIZE=2067, fm_block size=16548
>> 0(22568) fm_malloc_init(0xf4eb1000, 33554432), start=0xf4eb1000
>> 0(22568) shm_mem_init: success
>> 0(0) core dump limits set to 4294967295
>> 0(0) DEBUG: init_mod: postgres
>> postgres - initializing
>> 0(0) DEBUG: init_mod: sl_module
>> stateless - initializing
>> 0(0) DEBUG: register_fifo_cmd: new command (sl_stats) registered
>> 0(0) unixsock_register_cmd: New command (sl_stats) registered
>> 0(0) DEBUG: MD5 calculated: 1d0376a2244771bba12e9da5f03652d9
>> 0(0) DEBUG: init_mod: tm
>> 0(0) TM - (size of cell=2832, sip_msg=768) initializing...
>> 0(0) Call-ID initialization: '2ffddfe3'
>> 0(0) DEBUG: register_fifo_cmd: new command (t_uac_dlg) registered
>> 0(0) DEBUG: register_fifo_cmd: new command (t_uac_cancel) registered
>> 0(0) DEBUG: register_fifo_cmd: new command (t_hash) registered
>> 0(0) DEBUG: register_fifo_cmd: new command (t_reply) registered
>> 0(0) unixsock_register_cmd: New command (t_uac_dlg) registered
>> 0(0) unixsock_register_cmd: New command (t_uac_cancel) registered
>> 0(0) unixsock_register_cmd: New command (t_hash) registered
>> 0(0) unixsock_register_cmd: New command (t_reply) registered
>> [root at mex openser-1.0.1-tls]#  0(0) DEBUG: lock_initialize: lock 
>> initialization started
>> 0(0) DEBUG: register_fifo_cmd: new command (t_stats) registered
>> 0(0) unixsock_register_cmd: New command (t_stats) registered
>>
>>
>> Could be a problem in the certificates?
>> Joao Pereira
>>
>> Daniel-Constantin Mierla wrote:
>>
>>> Hello,
>>>
>>> did you check with "ps auxw | grep openser"? Wasn't there any 
>>> openser process running. From the logs looks like openser started ok 
>>> (tm module initialized succesfully - is it tm you last module in the 
>>> loadmodule list?).
>>>
>>> Cheers,
>>> Daniel
>>>
>>>
>>> On 03/22/06 14:21, Joao Pereira wrote:
>>>
>>>> Hello to all
>>>> Im trying to put OpenSER to work with TLS.
>>>> I created the certificates, and configured openser.cfg. ("openser 
>>>> -c" shows no errors)
>>>> But when I start OpenSER, there are no errors, but the server 
>>>> doesn't start:
>>>> It says this (with debug level 4) :
>>>>
>>>> Listening on
>>>> Aliases:
>>>>             *: mex.fccn.pt:*
>>>>             *: XXX.XXX.XXX.XXX:*
>>>>
>>>> 0(22549) fm_malloc_init: F_OPTIMIZE=16384, /ROUNDTO=2048
>>>> 0(22549) fm_malloc_init: F_HASH_SIZE=2067, fm_block size=16548
>>>> 0(22549) fm_malloc_init(0xf4eb1000, 33554432), start=0xf4eb1000
>>>> 0(22549) shm_mem_init: success
>>>> 0(0) core dump limits set to 4294967295
>>>> 0(0) DEBUG: init_mod: postgres
>>>> postgres - initializing
>>>> 0(0) DEBUG: init_mod: sl_module
>>>> stateless - initializing
>>>> 0(0) DEBUG: register_fifo_cmd: new command (sl_stats) registered
>>>> 0(0) unixsock_register_cmd: New command (sl_stats) registered
>>>> 0(0) DEBUG: MD5 calculated: 1d0376a2244771bba12e9da5f03652d9
>>>> 0(0) DEBUG: init_mod: tm
>>>> 0(0) TM - (size of cell=2832, sip_msg=768) initializing...
>>>> 0(0) Call-ID initialization: '6efffbed'
>>>> 0(0) DEBUG: register_fifo_cmd: new command (t_uac_dlg) registered
>>>> 0(0) DEBUG: register_fifo_cmd: new command (t_uac_cancel) registered
>>>> 0(0) DEBUG: register_fifo_cmd: new command (t_hash) registered
>>>> 0(0) DEBUG: register_fifo_cmd: new command (t_reply) registered
>>>> 0(0) unixsock_register_cmd: New command (t_uac_dlg) registered
>>>> 0(0) unixsock_register_cmd: New command (t_uac_cancel) registered
>>>> 0(0) unixsock_register_cmd: New command (t_hash) registered
>>>> 0(0) unixsock_register_cmd: New command (t_reply) registered
>>>> [root at mex openser-1.0.1-tls]#  0(0) DEBUG: lock_initialize: lock 
>>>> initialization started
>>>> 0(0) DEBUG: register_fifo_cmd: new command (t_stats) registered
>>>> 0(0) unixsock_register_cmd: New command (t_stats) registered
>>>>
>>>>
>>>> and nothing happens... OpenSER isnt runnig :(
>>>> -------------------------------------------------------------------------------------------------------------- 
>>>>
>>>>
>>>> this is a part of my openser.cfg:
>>>>
>>>> listen = tls:XXX.XXX.XXX.XXX
>>>>
>>>> tls_port_no = 5062
>>>> tls_method=SSLv23
>>>>
>>>> tls_certificate="/services/openser/openser-1.0.1-tls/tls/tools/rootCA/cacert.pem" 
>>>>
>>>> tls_private_key="/services/openser/openser-1.0.1-tls/tls/tools/rootCA/private/cakey.pem" 
>>>>
>>>> tls_ca_list="/services/openser/openser-1.0.1-tls/tls/tools/rootCA/certs/01.pem" 
>>>>
>>>>
>>>> tls_ciphers_list="NULL-SHA:NULL-MD5:AES256-SHA:AES128-SHA"
>>>>
>>>> tls_verify = 1
>>>> tls_require_certificate = 1
>>>> tls_handshake_timeout=119    # number of seconds
>>>> tls_send_timeout=121         # number of seconds
>>>>
>>>>
>>>> If you know whats the problem, please tell me :)
>>>> Thanks
>>>> Joao Pereira
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at openser.org
>>>> http://openser.org/cgi-bin/mailman/listinfo/users
>>>>
>>
>>
>> _______________________________________________
>> Users mailing list
>> Users at openser.org
>> http://openser.org/cgi-bin/mailman/listinfo/users
>>
>





More information about the sr-users mailing list