[Users] OpenSER with freeRadius

[Edson]

Hi Ed,

Please, what is the output of "openser -c <config-file>"?

If they doesn't display much information, it can be due to a broken config
file.

Regards,

Edson.

> -----Original Message-----
> From: users-bounces at openser.org [mailto:users-bounces at openser.org] On
> Behalf Of Bogdan-Andrei Iancu
> Sent: quinta-feira, 9 de março de 2006 07:13
> To: efelt at caflobvi.com
> Cc: Jaime Work; users at openser.org
> Subject: Re: [Users] OpenSER with freeRadius
> 
> Hi Ed,
> 
> please note that there is not log attached :).
> 
> to get a higher debug level, changed in your cfg script the debug value
> (9 for ex). The cfg value has priority over the parameters.
> 
> regards,
> bogdan
> 
> C. Ed Felt wrote:
> 
> > Fellow OpenSER users:
> >
> > We have been using SER at our VoIP company for a few years now and
> > have been running in to security issues.  We are pleased to see
> > someone has taken improving SER seriously and are trying to move to
> > OpenSER but are having problems with the implementation we need:
> > OpenSER with Radius Accounting and Radius Authentication (with
> > freeradius and MySQL).
> >
> > I compiled the latest stable version of openser on an FC1 Linux PC
> > with the needed modules added for Radius Authentication and
> > Accounting.  I am also using the latest version of freeradius.
> >
> > I have spent plenty of time in the email archives and documentation
> > before asking you for help.
> > I seemed to have everything installed correctly after adding the line
> > 'modparam("auth_radius", "radius_config",
> > "/usr/local/etc/radiusclient-ng/radiusclient.conf")' to the default
> > openser config file.  All the radius modules seem to load now and
> > openser doesn't exit with any errors.  But when I start openser and
> > check "ps -eaf | grep openser" it isn't running so I assume.  Here are
> > the last few lines of /var/log/messages:
> >
> >
> > I tried adding verbosity to the debug "-ddddd" but didn't get any more
> > information than the logs above.
> > I have also all ready included the needed dictionary file from openser
> > for freeradius in the freeradius dictionary config.
> >
> > Here is my current config under modules loading for auth (only change
> > to default config besides modparam above):
> > # Uncomment this if you want digest authentication
> > # mysql.so must be loaded !
> > loadmodule "/usr/local/lib/openser/modules/auth.so"
> > #loadmodule "/usr/local/lib/openser/modules/auth_db.so"
> > loadmodule "/usr/local/lib/openser/modules/auth_radius.so"
> > #loadmodule "/usr/local/lib/openser/modules/group_radius.so"
> > #loadmodule "/usr/local/lib/openser/modules/uri_radius.so"
> >
> > Please let me know what else I can try to get this working.  Some kind
> > of walk thru for the freeradius configuration would be helpful as well
> > (freeradius with MySQL).
> >
> > --
> >
> > *Thanks,*
> >
> > *C. Ed Felt Caflo Network Engineer/Programmer*
> > <http://www.caflo.com/>
> > (801) 766-8433 (home)
> > (801) 420-8879 (cell)
> > 74999 (h.323)
> > 74777 (sip)
> > edeefelt at hotmail.com <mailto://edeefelt@hotmail>
> > efelt at caflobvi.com <mailto://efelt@caflobvi.com>
> > *chat: *edeefelt(aim), edeefelt (yahoo), edeefelt at hotmail.com (msn),
> > v_2chafe at hotmail.com (msn)
> > http://www.thefelts.net <http://www.thefelts.net/>
> >
> >------------------------------------------------------------------------
> >
> >_______________________________________________
> >Users mailing list
> >Users at openser.org
> >http://openser.org/cgi-bin/mailman/listinfo/users
> >
> >
> 
> 
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users