[Serusers] ERROR: bad config file (1 errors)

Fri Jun 23 12:31:05 CEST 2006

hi olivier,
    in fact I have downloaded ser-0.9.6_linux_i386.tar.tar from iptel.org.

    then I have put the ser-0.9.6_linux_i386.tar.tar file in root(/)
directory and executed following command

    [root at oracle2 /]# tar -xvzf ser-0.9.6_linux_i386.tar.tar

    do still need to recompile it ? .....I think complation had to be done
in case I had the source code.

regards
Mukesh

  _____  

From: olivier.taylor [mailto:olivier.taylor at gmail.com] 
Sent: Friday, June 23, 2006 3:16 PM
To: mukesh
Cc: olivier.taylor at phonext.com; serusers at lists.iptel.org
Subject: Re: [Serusers] ERROR: bad config file (1 errors)

it seems that you didn't compile ser with mysql support.

go to the makefile et have a look at 

exclude_modules?= 
delete the mysql entry and recompile

Olivier

mukesh a écrit : 

hi olivier,

below is the log
-----------------------------------log starts
here--------------------------------------------
Jun 23 14:51:48 oracle2 ser: ERROR: load_module: could not open module
</usr/local/lib/ser/modules/mysql.so>: libmysqlclient.so.12: cannot open
shared object file: No such file or directory
Jun 23 14:51:48 oracle2 ser: parse error (37,13-14): failed to load module
-----------------------------------log ends
here--------------------------------------------

and line no. 37 is 
loadmodule "/usr/local/lib/ser/modules/mysql.so"

please suggest some solution.

regards
Mukesh

  _____  

From: olivier.taylor [mailto:olivier.taylor at gmail.com] 
Sent: Friday, June 23, 2006 12:45 PM
To: mukesh
Cc: olivier.taylor at phonext.com; serusers at lists.iptel.org
Subject: Re: [Serusers] ERROR: bad config file (1 errors)

yes, sure :)

/var/log/messages

you will find the informations you need concerning that error, at least, the
line of your cfg where the error occurs.

Olivier

mukesh a écrit : 

Thanks you olivier.

Can you be little more specific, where this message file is located ? 

Regards

Mukesh 

-----Original Message-----

From: olivier.taylor [mailto:olivier.taylor at gmail.com] 

Sent: Thursday, June 22, 2006 9:55 PM

To: mukesh

Cc: serusers at lists.iptel.org

Subject: Re: [Serusers] ERROR: bad config file (1 errors)

see the message file, you will find there the line wich is not correct on

your ser.cfg

Olivier

mukesh a écrit :

Hi I am getting "ERROR: bad config file (1 errors)" while truing to 

execute the SER.

And I could not figure out whats wrong with this line loadmodule 

"/usr/local/lib/ser/modules/mysql.so"

If I comment it then everything is file.

Following is my ser.cfg file

---------------------------------ser.cfg 

star------------------------------

#

# $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ # # simple 

quick-start config script #

# ----------- global configuration parameters ------------------------

debug=3         # debug level (cmd line: -dddddddddd)

fork=yes

log_stderror=no	# (cmd line: -E)

listen=192.87.41.149 #this address has been changed

# hostname matching an alias will satisfy the condition uri==myself".

alias=sip.myserver.com

/* Uncomment these lines to enter debugging mode fork=no 

log_stderror=yes */

#check_via=no	# (cmd. line: -v)

dns=no           # (cmd. line: -r)

rev_dns=no      # (cmd. line: -R)

port=5060

children=4

fifo="/tmp/ser_fifo"

fifo_db_url="mysql://ser:heslo@localhost/ser"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database loadmodule 

"/usr/local/lib/ser/modules/mysql.so"

loadmodule "/usr/local/lib/ser/modules/sl.so"

loadmodule "/usr/local/lib/ser/modules/tm.so"

loadmodule "/usr/local/lib/ser/modules/rr.so"

loadmodule "/usr/local/lib/ser/modules/maxfwd.so"

loadmodule "/usr/local/lib/ser/modules/usrloc.so"

loadmodule "/usr/local/lib/ser/modules/registrar.so"

loadmodule "/usr/local/lib/ser/modules/textops.so"

loadmodule "/usr/local/lib/ser/modules/uri_db.so" #added by mukesh

# Uncomment this if you want digest authentication # mysql.so must be 

loaded !

loadmodule "/usr/local/lib/ser/modules/auth.so"

loadmodule "/usr/local/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") #added 

by mukesh

modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to use SQL database # for persistent 

storage and comment the previous line modparam("usrloc", "db_mode", 2)

# -- auth params --

# Uncomment if you are using auth module # modparam("auth_db", 

"calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes 

(which true in this config), # uncomment also the following parameter) 

# modparam("auth_db", "password_column", "password")

# -- rr params --

# add value to ;lr param to make some broken UAs happy #modparam("rr", 

"enable_full_lr", 1)

# -------------------------  request routing logic -------------------

# main routing logic

route{

	# initial sanity checks -- messages with

	# max_forwards==0, or excessively long requests

	if (!mf_process_maxfwd_header("10")) {

		sl_send_reply("483","Too Many Hops");

		break;

	};

	if (msg:len >=  2048 ) {

		sl_send_reply("513", "Message too big");

		break;

	};

	# we record-route all messages -- to make sure that

	# subsequent messages will go through our proxy; that's

	# particularly good if upstream and downstream entities

	# use different transport protocol

	if (!method=="REGISTER") record_route();	

	# subsequent messages withing a dialog should take the

	# path determined by record-routing

	if (loose_route()) {

		# mark routing logic in request

		append_hf("P-hint: rr-enforced\r\n"); 

		route(1);

		break;

	};

	if (!uri==myself) {

		# mark routing logic in request

		append_hf("P-hint: outbound\r\n"); 

		route(1);

		break;

	};

	# if the request is for other domain use UsrLoc

	# (in case, it does not work, use the following command

	# with proper names and addresses in it)

	if (uri==myself) {

		if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication

			if (!www_authorize("sip.myserver.com",

"subscriber")) {

				www_challenge("ser.hungama.com", "0");

				break;

			};

			save("location");

			break;

		};

		lookup("aliases");

		if (!uri==myself) {

			append_hf("P-hint: outbound alias\r\n"); 

			route(1);

			break;

		};

		# native SIP destinations are handled using our USRLOC DB

		if (!lookup("location")) {

			sl_send_reply("404", "Not Found");

			break;

		};

	};

	append_hf("P-hint: usrloc applied\r\n"); 

	route(1);

}

route[1]

{

	# send it out now; use stateful forwarding as it works reliably

	# even for UDP2TCP

	if (!t_relay()) {

		sl_reply_error();

	};

}

---------------------------------ser.cfg 

ends------------------------------

Any help/suggestion is highly appreciated.

Regards

Mukesh

_______________________________________________

Serusers mailing list

Serusers at lists.iptel.org

http://lists.iptel.org/mailman/listinfo/serusers

_______________________________________________

Serusers mailing list

Serusers at lists.iptel.org

http://lists.iptel.org/mailman/listinfo/serusers

  _____  

_______________________________________________

Serusers mailing list

Serusers at lists.iptel.org

http://lists.iptel.org/mailman/listinfo/serusers

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20060623/2aea7563/attachment.htm>