[Serusers] first posting, got a few problems..

[nick]

To explain my situation, I've got a dual opteron 246 system with 1gig of 
ram and 2 80gig disks in raid1 (software raid), I'm running CentOS 4.3 
x86_64 with kernel  2.6.9-34.ELsmp I'm running ser 0.9.6-6 (the -6 may 
just be an artifact from the fedora core rpm.. I dunno) (compiled from 
ser-0.9.6_src.tar.gz)


Since no one seems to makes rpms for redhat or centOS  (the same thing 
obviously) I went and made my own. I grabbed a fedora core 6 src rpm, 
and modified the specfile to my own liking (basically I took out the 
stuff related to postgres), the compile went fine, as far as I can tell, 
no errors were big enough to stop the compilation at least, and the rpms 
installed just fine. All the modules are in the right place, and my 
ser.cfg seems to be correct (I don't get any more errors during 
startup), however, I do get a segfault :(

here's the attached output from /log/messages

Jun 23 12:20:18 sipserver ser: Listening on
Jun 23 12:20:18 sipserver ser:              udp: 192.168.1.93 
[192.168.1.93]:5060
Jun 23 12:20:18 sipserver ser:              tcp: 192.168.1.93 
[192.168.1.93]:5060
Jun 23 12:20:18 sipserver ser: Aliases:
Jun 23 12:20:18 sipserver ser:              tcp: pc-00093:5060
Jun 23 12:20:18 sipserver ser:              udp: pc-00093:5060
Jun 23 12:20:18 sipserver ser:
Jun 23 12:20:18 sipserver kernel: ser[3682]: segfault at 
0000000000000000 rip 0000002a9589ef92 rsp 0000007fbffff850 error 4
Jun 23 12:20:18 sipserver ser: ser startup succeeded

Obviously ser isn't running, does anyone have any idea where I can start 
looking to find out what dies/died/went wrong with the compile?

Thanks,

Nick