[Serusers] ERROR: bad config file (1 errors)

[Andrey Kouprianov]

I think i mentioned /var/log/messages... That's the file

On 6/23/06, mukesh <mukesh at hungama.com> wrote:
> Thanks you olivier.
>
> Can you be little more specific, where this message file is located ?
>
> Regards
> Mukesh
>
> -----Original Message-----
> From: olivier.taylor [mailto:olivier.taylor at gmail.com]
> Sent: Thursday, June 22, 2006 9:55 PM
> To: mukesh
> Cc: serusers at lists.iptel.org
> Subject: Re: [Serusers] ERROR: bad config file (1 errors)
>
> see the message file, you will find there the line wich is not correct on
> your ser.cfg
>
> Olivier
>
> mukesh a écrit :
> > Hi I am getting "ERROR: bad config file (1 errors)" while truing to
> > execute the SER.
> >
> > And I could not figure out whats wrong with this line loadmodule
> > "/usr/local/lib/ser/modules/mysql.so"
> >
> > If I comment it then everything is file.
> >
> >
> > Following is my ser.cfg file
> > ---------------------------------ser.cfg
> > star------------------------------
> > #
> > # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ # # simple
> > quick-start config script #
> >
> > # ----------- global configuration parameters ------------------------
> >
> > debug=3         # debug level (cmd line: -dddddddddd)
> > fork=yes
> > log_stderror=no       # (cmd line: -E)
> >
> > listen=192.87.41.149 #this address has been changed
> >
> >
> >
> > # hostname matching an alias will satisfy the condition uri==myself".
> > alias=sip.myserver.com
> >
> > /* Uncomment these lines to enter debugging mode fork=no
> > log_stderror=yes */
> >
> > #check_via=no # (cmd. line: -v)
> > dns=no           # (cmd. line: -r)
> > rev_dns=no      # (cmd. line: -R)
> > port=5060
> > children=4
> > fifo="/tmp/ser_fifo"
> > fifo_db_url="mysql://ser:heslo@localhost/ser"
> >
> > # ------------------ module loading ----------------------------------
> >
> > # Uncomment this if you want to use SQL database loadmodule
> > "/usr/local/lib/ser/modules/mysql.so"
> > loadmodule "/usr/local/lib/ser/modules/sl.so"
> > loadmodule "/usr/local/lib/ser/modules/tm.so"
> > loadmodule "/usr/local/lib/ser/modules/rr.so"
> > loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> > loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> > loadmodule "/usr/local/lib/ser/modules/registrar.so"
> > loadmodule "/usr/local/lib/ser/modules/textops.so"
> > loadmodule "/usr/local/lib/ser/modules/uri_db.so" #added by mukesh
> >
> > # Uncomment this if you want digest authentication # mysql.so must be
> > loaded !
> > loadmodule "/usr/local/lib/ser/modules/auth.so"
> > loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> >
> > # ----------------- setting module-specific parameters ---------------
> >
> > # -- usrloc params --
> > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") #added
> > by mukesh
> > modparam("usrloc", "db_mode",   0)
> >
> > # Uncomment this if you want to use SQL database # for persistent
> > storage and comment the previous line modparam("usrloc", "db_mode", 2)
> >
> > # -- auth params --
> > # Uncomment if you are using auth module # modparam("auth_db",
> > "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes
> > (which true in this config), # uncomment also the following parameter)
> > # modparam("auth_db", "password_column", "password")
> >
> > # -- rr params --
> > # add value to ;lr param to make some broken UAs happy #modparam("rr",
> > "enable_full_lr", 1)
> >
> > # -------------------------  request routing logic -------------------
> >
> > # main routing logic
> >
> > route{
> >
> >       # initial sanity checks -- messages with
> >       # max_forwards==0, or excessively long requests
> >       if (!mf_process_maxfwd_header("10")) {
> >               sl_send_reply("483","Too Many Hops");
> >               break;
> >       };
> >       if (msg:len >=  2048 ) {
> >               sl_send_reply("513", "Message too big");
> >               break;
> >       };
> >
> >
> >       # we record-route all messages -- to make sure that
> >       # subsequent messages will go through our proxy; that's
> >       # particularly good if upstream and downstream entities
> >       # use different transport protocol
> >       if (!method=="REGISTER") record_route();
> >
> >       # subsequent messages withing a dialog should take the
> >       # path determined by record-routing
> >       if (loose_route()) {
> >               # mark routing logic in request
> >               append_hf("P-hint: rr-enforced\r\n");
> >               route(1);
> >               break;
> >       };
> >
> >       if (!uri==myself) {
> >               # mark routing logic in request
> >               append_hf("P-hint: outbound\r\n");
> >               route(1);
> >               break;
> >       };
> >
> >       # if the request is for other domain use UsrLoc
> >       # (in case, it does not work, use the following command
> >       # with proper names and addresses in it)
> >       if (uri==myself) {
> >
> >               if (method=="REGISTER") {
> >
> > # Uncomment this if you want to use digest authentication
> >                       if (!www_authorize("sip.myserver.com",
> > "subscriber")) {
> >                               www_challenge("ser.hungama.com", "0");
> >                               break;
> >                       };
> >
> >                       save("location");
> >                       break;
> >               };
> >
> >               lookup("aliases");
> >               if (!uri==myself) {
> >                       append_hf("P-hint: outbound alias\r\n");
> >                       route(1);
> >                       break;
> >               };
> >
> >               # native SIP destinations are handled using our USRLOC DB
> >               if (!lookup("location")) {
> >                       sl_send_reply("404", "Not Found");
> >                       break;
> >               };
> >       };
> >       append_hf("P-hint: usrloc applied\r\n");
> >       route(1);
> > }
> >
> > route[1]
> > {
> >       # send it out now; use stateful forwarding as it works reliably
> >       # even for UDP2TCP
> >       if (!t_relay()) {
> >               sl_reply_error();
> >       };
> > }
> >
> > ---------------------------------ser.cfg
> > ends------------------------------
> >
> > Any help/suggestion is highly appreciated.
> >
> > Regards
> > Mukesh
> >
> >
> > _______________________________________________
> > Serusers mailing list
> > Serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
> >
> >
>
>
> _______________________________________________
> Serusers mailing list
> Serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>