[Serusers] ERROR: bad config file (1 errors)

[olivier.taylor]

see the message file, you will find there the line wich is not correct 
on your ser.cfg

Olivier

mukesh a écrit :
> Hi I am getting "ERROR: bad config file (1 errors)" while truing to execute
> the SER.
>
> And I could not figure out whats wrong with this line
> loadmodule "/usr/local/lib/ser/modules/mysql.so"
>
> If I comment it then everything is file.
>
>
> Following is my ser.cfg file
> ---------------------------------ser.cfg star------------------------------
> #
> # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $
> #
> # simple quick-start config script
> #
>
> # ----------- global configuration parameters ------------------------
>
> debug=3         # debug level (cmd line: -dddddddddd)
> fork=yes
> log_stderror=no	# (cmd line: -E)
>
> listen=192.87.41.149 #this address has been changed
>
>
>
> # hostname matching an alias will satisfy the condition uri==myself".
> alias=sip.myserver.com
>
> /* Uncomment these lines to enter debugging mode 
> fork=no
> log_stderror=yes
> */
>
> #check_via=no	# (cmd. line: -v)
> dns=no           # (cmd. line: -r)
> rev_dns=no      # (cmd. line: -R)
> port=5060
> children=4
> fifo="/tmp/ser_fifo"
> fifo_db_url="mysql://ser:heslo@localhost/ser"
>
> # ------------------ module loading ----------------------------------
>
> # Uncomment this if you want to use SQL database
> loadmodule "/usr/local/lib/ser/modules/mysql.so"
> loadmodule "/usr/local/lib/ser/modules/sl.so"
> loadmodule "/usr/local/lib/ser/modules/tm.so"
> loadmodule "/usr/local/lib/ser/modules/rr.so"
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> loadmodule "/usr/local/lib/ser/modules/registrar.so"
> loadmodule "/usr/local/lib/ser/modules/textops.so"
> loadmodule "/usr/local/lib/ser/modules/uri_db.so" #added by mukesh
>
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> loadmodule "/usr/local/lib/ser/modules/auth.so"
> loadmodule "/usr/local/lib/ser/modules/auth_db.so"
>
> # ----------------- setting module-specific parameters ---------------
>
> # -- usrloc params --
> modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") #added by
> mukesh
> modparam("usrloc", "db_mode",   0)
>
> # Uncomment this if you want to use SQL database 
> # for persistent storage and comment the previous line
> modparam("usrloc", "db_mode", 2)
>
> # -- auth params --
> # Uncomment if you are using auth module
> #
> modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which true in this config), 
> # uncomment also the following parameter)
> #
> modparam("auth_db", "password_column", "password")
>
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> #modparam("rr", "enable_full_lr", 1)
>
> # -------------------------  request routing logic -------------------
>
> # main routing logic
>
> route{
>
> 	# initial sanity checks -- messages with
> 	# max_forwards==0, or excessively long requests
> 	if (!mf_process_maxfwd_header("10")) {
> 		sl_send_reply("483","Too Many Hops");
> 		break;
> 	};
> 	if (msg:len >=  2048 ) {
> 		sl_send_reply("513", "Message too big");
> 		break;
> 	};
> 	
>
> 	# we record-route all messages -- to make sure that
> 	# subsequent messages will go through our proxy; that's
> 	# particularly good if upstream and downstream entities
> 	# use different transport protocol
> 	if (!method=="REGISTER") record_route();	
>
> 	# subsequent messages withing a dialog should take the
> 	# path determined by record-routing
> 	if (loose_route()) {
> 		# mark routing logic in request
> 		append_hf("P-hint: rr-enforced\r\n"); 
> 		route(1);
> 		break;
> 	};
>
> 	if (!uri==myself) {
> 		# mark routing logic in request
> 		append_hf("P-hint: outbound\r\n"); 
> 		route(1);
> 		break;
> 	};
>
> 	# if the request is for other domain use UsrLoc
> 	# (in case, it does not work, use the following command
> 	# with proper names and addresses in it)
> 	if (uri==myself) {
>
> 		if (method=="REGISTER") {
>
> # Uncomment this if you want to use digest authentication
> 			if (!www_authorize("sip.myserver.com",
> "subscriber")) {
> 				www_challenge("ser.hungama.com", "0");
> 				break;
> 			};
>
> 			save("location");
> 			break;
> 		};
>
> 		lookup("aliases");
> 		if (!uri==myself) {
> 			append_hf("P-hint: outbound alias\r\n"); 
> 			route(1);
> 			break;
> 		};
>
> 		# native SIP destinations are handled using our USRLOC DB
> 		if (!lookup("location")) {
> 			sl_send_reply("404", "Not Found");
> 			break;
> 		};
> 	};
> 	append_hf("P-hint: usrloc applied\r\n"); 
> 	route(1);
> }
>
> route[1] 
> {
> 	# send it out now; use stateful forwarding as it works reliably
> 	# even for UDP2TCP
> 	if (!t_relay()) {
> 		sl_reply_error();
> 	};
> }
>
> ---------------------------------ser.cfg ends------------------------------
>
> Any help/suggestion is highly appreciated.
>
> Regards
> Mukesh
>
>
> _______________________________________________
> Serusers mailing list
> Serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
>