[Serusers] query about acc module

[Aman Sachdeva]

sir,
i am install ser sucessfully and  my two user connect and  they can talk
easilly using xlite(softphone),but i have faced one problem that i could not
store the information about call information in acc table of ser database.
i store the user location information in the database but not call
inforation.i load all the module which is needed to accounting table such
as(acc &tm).

i am sending my configuration file.

 #
# $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $
#
# simple quick-start config script
#

# ----------- global configuration parameters ------------------------

#debug=3         # debug level (*cmd* line: -dddddddddd)
#fork=yes
#log_stderror=no	# (*cmd* line: -E)

/* Uncomment these lines to enter debugging *mode*
fork=no
log_stderror=yes
*/

check_via=no	# (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"
#SER_SQL_URI="mysql:*//ser:heslo at localhost/ser"*
# ------------------ module *loading* ----------------------------------

# Uncomment this if you want to *use* SQL database
loadmodule "/usr/local/ser-0.9.6/modules/mysql/mysql.so"

loadmodule "/usr/local/ser-0.9.6/modules/sl/sl.so"
loadmodule "/usr/local/ser-0.9.6/modules/tm/tm.so"
loadmodule "/usr/local/ser-0.9.6/modules/rr/rr.so"
loadmodule "/usr/local/ser-0.9.6/modules/maxfwd/maxfwd.so"
loadmodule "/usr/local/ser-0.9.6/modules/usrloc/usrloc.so"
loadmodule "/usr/local/ser-0.9.6/modules/registrar/registrar.so"
loadmodule "/usr/local/ser-0.9.6/modules/textops/textops.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/ser-0.9.6/modules/auth/auth.so"
loadmodule "/usr/local/ser-0.9.6/modules/auth_db/auth_db.so"
loadmodule "/usr/local/ser-0.9.6/modules/acc/acc.so"
# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to *use* SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you *set* "calculate_ha1" parameter to yes (which true *in* this config),
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "*password**")*

# -- rr params --
# add value to ;lr param to make some *broken* UAs happy
modparam("rr", "enable_full_lr", 1)

# -- acc params --
# *set* the reporting *log* level
modparam("acc", "log_level", 1)
# number of flag, which will be used for accounting; if a message is
# labeled with this flag, its completion *status* will be reported
modparam("acc", "log_flag", 1 )

modparam("usrloc|acc|auth_db|group|msilo|uri","db_url","mysql:*//ser:heslo at localhost/ser")*


# -------------------------  request routing logic -------------------

# *main* routing logic

route{

	# initial sanity checks -- messages with
	# max_forwards==0, or excessively long requests
	if (!mf_process_maxfwd_header("10")) {
		sl_send_reply("483","Too Many Hops");
		break;
	};
	if (*msg*:len >=  2048 ) {
		sl_send_reply("513", "Message too big");
		break;
	};
	

	# we record-route all messages -- to make sure that
	# subsequent messages will go through our proxy; that's
	# particularly good if upstream and downstream *entities*
	# *use* different transport protocol
	if (!method=="REGISTER") record_route();	
 	setflag(1);
	# subsequent messages withing a dialog should take the
	# *path* determined by record-routing
	if (loose_route()) {
		# mark routing logic *in* request
		append_hf("P-hint: rr-enforced\r\n");
		route(1);
		break;
	};

	if (!uri==myself) {
		# mark routing logic *in* request
		append_hf("P-hint: outbound\r\n");
		route(1);
		break;
	};

	# if the request is for other domain *use* UsrLoc
	# (*in* case, it does not work, use the following command
	# with proper names and addresses *in* it)
	if (uri==myself) {

		if (method=="REGISTER") {

# Uncomment this if you want to *use* digest authentication
			if (!www_authorize("192.168.1.7", "subscriber")) {
				www_challenge("192.168.1.7", "0");
				break;
			};
			setflag(1);
			*save*(*"location"*);
			record_route();
			break;
		};

		lookup("*alias*es");
		if (!uri==myself) {
			append_hf("P-hint: outbound *alias*\r\n");
			route(1);
			break;
		};

		# native SIP destinations are handled using our USRLOC DB
		if (!lookup("location")) {
			sl_send_reply("404", "Not Found");
			break;
		};
	};
	setflag(1);
	append_hf("P-hint: usrloc applied\r\n");
	record_route();
	route(1);
}

route[1]
{
	# send it out now; *use* stateful forwarding as it works reliably
	# even for UDP2TCP
	if (!t_relay()) {
		sl_reply_error();
	};
}







i am waiting for ur replly

Regards
aman sachdeva
sachdeva.aman at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20060622/914eb6e9/attachment.htm>