[Serusers] Re: mediaproxy problem

[Andrey Kouprianov]

Thank you Hakan!! That's great news! I still cant get my hands free to
deal with this issue. However, I looked up my FreeBSD ports and python
mysqldb support lib is there. :) I'll try to run mediaproxy asap and
let the list know about the outcome.

Regards,

Andrey.

On 6/20/06, Hakan YASTI <hakanyasti at gmail.com> wrote:
> Hi Andrey,
>
> It has worked. After I installed
> py24-MySQLdb-1.2.1.p2     Access a MySQL database through Python
> it is working now.
> Thanks for your kind interest.
> Best Regards,
> Hakan.
>
>
> ----- Original Message -----
> From: "Andrey Kouprianov" <andrey.kouprianov at gmail.com>
> To: <serusers at iptel.org>
> Sent: Sunday, June 18, 2006 2:58 PM
> Subject: Re: [Serusers] Re: mediaproxy problem
>
>
> > Will try!! :)
> >
> > Thanx a lot!
> >
> > On 6/18/06, rusl <rusl at jpfortune.org> wrote:
> >>
> >> You need to have the python " MySQLdb" module installed.
> >>
> >> On Sunday 18. June 2006 11:45, Andrey Kouprianov wrote:
> >> > Yup. Me too. I hope to get some comments on this... :)
> >> >
> >> > Anyone?
> >> >
> >> > On 6/17/06, Hakan YASTI <hakanyasti at gmail.com> wrote:
> >> > > Hi Andrey,
> >> > >
> >> > > I have the same problem with proxy dispatcher. Have got a solution
> >> > > for
> >> > > your problem. I couldn't see any solution for your problem.
> >> > >
> >> > > Hope to hera soon.
> >> > >
> >> > > Best Regards,
> >> > > Hakan.
> >> > >
> >> > >
> >> > >
> >> > >
> >> > > Hi,
> >> >
> >> > I have tried to install mediaproxy 1.7.2. So, i did. Configuration
> >> >
> >> > > was
> >> >
> >> > about the same as 1.4.2, however, "mediaproxy start", just
> >> >
> >> > > started
> >> >
> >> > mediaproxy.py, but not proxydispatcher.py. Version 1.4.2 started
> >> >
> >> > > them
> >> >
> >> > both w/o any problem. Trying to start proxydispatcher.py
> >> >
> >> > > independently
> >> >
> >> > did not give any results. /var/run/proxydispatcher.sock is
> >> >
> >> > > simply not
> >> >
> >> > there anymore. There are no logs or whatsoever, that I could show
> >> >
> >> > > you,
> >> >
> >> > because I did not find any. Anyway, here's the config
> >> >
> >> > > (NOTE:
> >> >
> >> > mediaproxy's running on the same machine as SER):
> >> >
> >> > [Dispatcher]
> >> > start
> >> >
> >> > > = yes
> >> >
> >> > socket = /var/run/proxydispatcher.sock
> >> > listen = <my IP address>
> >> > group
> >> >
> >> > > = wheel
> >> >
> >> > defaultProxy = /var/run/mediaproxy.sock
> >> >
> >> > [MediaProxy]
> >> > start =
> >> >
> >> > > yes
> >> >
> >> > socket = /var/run/mediaproxy.sock
> >> > group = wheel
> >> > listen = <my IP
> >> >
> >> > > address>
> >> >
> >> > allow = <my IP address>, 127.0.0.1
> >> > proxyIP = <my IP
> >> >
> >> > > address>
> >> >
> >> > portRange = 60000:65000
> >> > TOS = 0xb8
> >> > idleTimeout = 60
> >> > holdTimeout =
> >> >
> >> > > 3600
> >> >
> >> > forceClose = 10800
> >> >
> >> > [Accounting]
> >> > dbaccounting = off
> >> >
> >> > //<my IP address>
> >> >
> >> > > is IP of SER/mediaproxy machine
> >> >
> >> > // the rest is irrelevant
> >> >
> >> > Please, also note
> >> >
> >> > > that I dont have a DNS SRV entry for media proxy.
> >> >
> >> > Could that cause the
> >> >
> >> > > problem?
> >> >
> >> > One way or another, I had to downgrade back to 1.4.2. Any
> >> >
> >> > > suggestions?
> >> >
> >> > Thanx in advance.
> >> >
> >> > Andrey.
> >> >
> >> > _______________________________________________
> >> > Serusers mailing list
> >> > Serusers at lists.iptel.org
> >> > http://lists.iptel.org/mailman/listinfo/serusers
> >> _______________________________________________
> >> Serusers mailing list
> >> Serusers at lists.iptel.org
> >> http://lists.iptel.org/mailman/listinfo/serusers
> >>
> > _______________________________________________
> > Serusers mailing list
> > Serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
>
>