[Serusers] RE: Ser.cfg

[Sam Lee]

Looks okay to me
You should put in Authorization user as well. Just use aruna will do.
Remember to put in your sip proxy address.

-----Original Message-----
From: S.A.S. Lorensuhewa [mailto:aruna at cc.ruh.ac.lk] 
Sent: Friday, June 02, 2006 3:43 PM
To: Sam Lee
Cc: S.A.S. Lorensuhewa; serusers at lists.iptel.org
Subject: Re: Ser.cfg

Dear Lee,

How the client (X-Lite) locate the Sip server? 

 X-Lite Configuration is give below 


1. Sip Proxy - Default setting

    Enable: yes
    Display name: Aruna
    User Name: aruna at 192.248.48.12
    Authorization user:
    Password: arunaxyz
    Dmain: ruh.ac.lk 

2. Network Setting 

   Auto detect IP: yes
   Listen on IP: ?????
   Use x-NAT .... SIP/RTP ports: Never
   Listen Sip port: 5060
   Listen RTP port: 8000
   ...
   Primary DNS: 

Can you please check these things and correct me if any wrong or need
adtional info. 

But I didn't put any DNS entry as I used 

     export SIP_DOMAIN="192.248.48.12" 

Aruna 


Sam Lee writes: 

> Hi Aruna,
> 
> The domain don't need to be a 'real' domain. It is NOT a Internet 
> domain, it is just an identifier to group all your sip client
together.
> Just make sure that your domain matches those sip accounts that you 
> are trying to authenticate.
> In this case, you can even put sip.com for your domain (if you like ;>

> ).
> So you will do a export SIP_DOMAIN="sip.com" 
> 
> Got it ? 
> 
> Sam
> 
> -----Original Message-----
> From: S.A.S. Lorensuhewa [mailto:aruna at cc.ruh.ac.lk]
> Sent: Friday, June 02, 2006 3:20 PM
> To: Sam Lee
> Cc: S.A.S. Lorensuhewa; serusers at lists.iptel.org
> Subject: Re: Ser.cfg
> 
> Dear Lee and Others,
> 
> My server hostname is Orange and domain is ruh.ac.lk. In that case I 
> need to to put ruh.ac.lk in this entry. Do I need to put DNS entry 
> With SRV to resolve when Clients need?
> 
> In the initial setting in the /etc/profile I put following entry for 
> SIP_DOMAIN
> 
>     export SIP_DOMAIN="192.248.48.12"  
> 
> Now I think this need to be "ruh.ac.lk" (or "Ornage.ruh.ac.lk").  
> 
> Can you help me in this problem.  
> 
> Regards
> 
> Aruna
> 
> 
> Sam Lee writes:  
> 
>> XX = your sip domain
>> YY = "subscriber"  
>> 
>> So if your sip domain is abc.com
>> It should read like this
>> Www_authorize("abc.com","subcriber")
>> 
>> -----Original Message-----
>> From: serusers-bounces at lists.iptel.org 
>> [mailto:serusers-bounces at lists.iptel.org] On Behalf Of S.A.S.
>> Lorensuhewa
>> Sent: Friday, June 02, 2006 1:58 PM
>> To: serusers at lists.iptel.org
>> Subject: [Serusers] Ser.cfg
>> 
>> Dear All,
>> 
>> I have problem of registering from UA's.   
>> 
>> So I am going through all  the setting in the ser.cfg. Can somebody 
>> tell me what should be in the www_authorize(" XX","YY ") function in 
>> the route section.
>> 
>> XX ?
>> YY ?   
>> 
>> Aruna. 
>> _______________________________________________
>> Serusers mailing list
>> Serusers at lists.iptel.org
>> http://lists.iptel.org/mailman/listinfo/serusers
>   
> 
> 
>  ----------------------------------------------------------
> S. A. S. Lorensuhewa
> Head, Department of Computer Science
> University of Ruhuna, Matara, Sri Lanka
> Telephone: 0094 (0)41 2227019
> Fax: 0094 (0)41 2222683
> Email: lorensuhewa at cc.ruh.ac.lk,  aruna at cc.ruh.ac.lk
> 
 


 ----------------------------------------------------------
S. A. S. Lorensuhewa
Head, Department of Computer Science
University of Ruhuna, Matara, Sri Lanka
Telephone: 0094 (0)41 2227019
Fax: 0094 (0)41 2222683
Email: lorensuhewa at cc.ruh.ac.lk,  aruna at cc.ruh.ac.lk