[Users] SIP Clients Can't REGISTER

[Daniel-Constantin Mierla]

Hello,

On 06/19/06 14:38, Hamid Ali Asgari wrote:
> Hi,
> Thanks for the reply.
> I commented out the entry you mentioned:
>
> #101 at mydomain.com Auth-Type := Accept, Sip-Group == "suspended", 
> #Service-Type == "Group-Check"
>
> What happens now is that the radius will check for a group named SUSPENDED
> and will reject because it won't match the 101 user:
>
> >From RADIUS debug:
>     users: Matched entry DEFAULT at line 152
>     users: Matched entry DEFAULT at line 255
> -----------------------------------------------------------
> Users:152: DEFAULT Auth-Type = System
>         Fall-Through = 1
> Users:255: DEFAULT Auth-Type := Reject, Service-Type == "Group-Check"
>
> Any thoughts?
>   

this is ok, it is the response that the user is not in the suspended 
group. The processing should go further in openser configuration script. 
Do you encounter other issues with calls/registrations?

Cheers,
Daniel


> Hamid
>
>
>
>
> -----Original Message-----
> From: Daniel-Constantin Mierla [mailto:daniel at voice-system.ro] 
> Sent: Monday, June 19, 2006 12:54 PM
> To: Hamid Ali Asgari
> Cc: 'Edson'; users at openser.org
> Subject: Re: [Users] SIP Clients Can't REGISTER
>
> If look carefully in the configuration file of the tutorial, it checks 
> for users belonging to "suspended" group. As you have in 'users' file:
>
> 101 at mydomain.com Auth-Type := Accept, Sip-Group == "suspended", 
> Service-Type == "Group-Check"
>
> Reply-Message = "Authorized"
>
> means that user 101 is in suspended group and it is not allowed to 
> register or initiate calls. So remove this line for your 'users' file.
>
> Also, when you test, just watch the network traffic on you sip server, 
> it will reveal the reply code so you can spot easily which statement was 
> hit in the config file: ngrep -d any port 5060
>
> Cheers,
> Daniel
>
>
>
>
> On 06/18/06 12:23, Hamid Ali Asgari wrote:
>   
>> Hi,
>>
>> I get the following:
>>
>> [root at localhost radiusclient-ng]# radiusclient -f 
>> /usr/local/etc/radiusclient-ng/radiusclient.conf 
>> 'User-Name=101 at mydomain.com' 'Password=101';echo $?
>>
>> Reply-Message = 'Authenticated'
>>
>> 1
>>
>> I guess the radiusclient is working fine since I am receiving the 
>> RADIUS packets on the freeradius debugs.
>>
>> I suspect the following entries in the debug:
>>
>> rad_recv: Access-Request packet from host 127.0.0.1:32901, id=197, 
>> length=64
>>
>> User-Name = "101 at mydomain"
>>
>> Sip-Group = "*suspended*"
>>
>> Service-Type = Group-Check
>>
>> NAS-Port = 0
>>
>> NAS-IP-Address = 127.0.0.1
>>
>> Why is openser setting the group to SUSPENDED???? Since there is no 
>> group named _suspended_ on the radius that may be the reason the 
>> radius is rejecting:
>>
>> RADIUS Users file:
>>
>> ### --- avps ---
>>
>> 101 at mydomain.com Auth-Type := Accept, Service-Type == "SIP-Callee-AVPs"
>>
>> Sip-Avp += "#3#1",
>>
>> Sip-Avp += "#4:08:00",
>>
>> Sip-Avp += "#5:16:00",
>>
>> Sip-Avp += "#6:Mon,Wed,Thu,Fri"
>>
>> 102 at mydomain.com Auth-Type := Accept, Service-Type == "SIP-Callee-AVPs"
>>
>> Sip-Avp += "#3#1",
>>
>> Sip-Avp += "#4:08:00",
>>
>> Sip-Avp += "#5:16:00",
>>
>> Sip-Avp += "#6:Mon,Wed,Thu,Free"
>>
>> DEFAULT Auth-Type := Accept, Service-Type == "SIP-Callee-AVPs"
>>
>> ### --- group checking ---
>>
>> ### --- user 101 ---
>>
>> 101 at mydomain.com Auth-Type := Accept, Sip-Group == "voip", 
>> Service-Type == "Group-Check"
>>
>> Reply-Message = "Authorized"
>>
>> 101 at mydomain.com Auth-Type := Accept, Sip-Group == "suspended", 
>> Service-Type == "Group-Check"
>>
>> Reply-Message = "Authorized"
>>
>> 101 at mydomain.com Auth-Type := Accept, Sip-Group == "pstn", 
>> Service-Type == "Group-Check"
>>
>> Reply-Message = "Authorized"
>>
>> ### --- user 102 ---
>>
>> 102 at mydomain.com Auth-Type := Accept, Sip-Group == "voip", 
>> Service-Type == "Group-Check"
>>
>> Reply-Message = "Authorized"
>>
>> DEFAULT Auth-Type := Reject, Service-Type == "Group-Check"
>>
>> ### --- user authentication ---
>>
>> 101 at mydomain.com Auth-Type := Digest, User-Password == "101"
>>
>> Reply-Message = "Authenticated",
>>
>> Sip-Avp += "rpid:101",
>>
>> Sip-Avp += "#2:192.168.10.17",
>>
>> # Sip-Avp += "#2:192.168.2.11"
>>
>> 102 at mydomain.com Auth-Type := Digest, User-Password == "102"
>>
>> Reply-Message = "Authenticated",
>>
>> Sip-Avp += "rpid:102",
>>
>> # Sip-Avp += "#2:192.168.2.12"
>>
>> ------------------------------------------------------------------------
>>
>> *From:* Edson [mailto:4lists at gmail.com]
>> *Sent:* Thursday, June 15, 2006 4:19 PM
>> *To:* 'Hamid Ali Asgari'; users at openser.org
>> *Subject:* RE: [Users] SIP Clients Can't REGISTER
>>
>> Take a look on the user credentials on Radius DB. Radius is rejecting 
>> the authentication, so there should be some mismatch between Your 
>> login credentials and what Radius has in its DB.
>>
>> Try to run this command and see what's the result (linux version):
>>
>> radiusclient -f <conf-dir-of-radiusclient-ng>/radiusclient.conf -p 123 
>> 'User-Name=some at valid.user' 'Password=Guess';echo $?
>>
>> It should return:
>>
>> Reply-Message = 'Authenticated'
>>
>> Edson.
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Users mailing list
>> Users at openser.org
>> http://openser.org/cgi-bin/mailman/listinfo/users
>>   
>>     
>
>
>