[Users] please help me...........................................!!!!!!!!!!!!!!!!!!!!!!!!!!!11

raviprakash sunkara sunkara.raviprakash.feb14 at gmail.com
Sat Jun 3 13:37:18 CEST 2006


Hi,

Please help  me in this.
" udp_rcv_loop: probing packet received from 192.168.2.21 50195 ": means

And Integrate the Radius+ mysql with Openser.
In logined and call are made.
acct_type isfailed...
In Radacct table od Radius

acctstoptime ,acctSessionTime,connectinfo_start,conecctinfo_stop , these
entities are insert as null, But AcctStartTime is inserting.



Below one is openser.cfg file

please help me



#*************************************************************************************************
modparam("usrloc", "db_mode", 2)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "calculate_ha1", yes)
modparam("usrloc|acc|auth_db|group|msilo", "db_url", "
mysql://openser:openserrw@localhost/openser")
########333333
modparam("acc","log_level",1)
modparam("acc","log_flag",1)
modparam("acc","log_missed_flag",2)
modparam("acc", "log_fmt", "cdfimorstup")
modparam("acc", "failed_transaction_flag",3)
modparam("acc", "report_cancels", 1)
modparam("acc","report_ack",0)
modparam("acc", "db_flag", 1)
modparam("acc", "db_missed_flag", 2)
modparam("acc","radius_flag",1)
modparam("acc","radius_missed_flag",2)
modparam("acc","service_type",16)
modparam("acc","radius_config","/usr/local/etc/radiusclient-ng/radiusclient.conf")
##########33
modparam("nathelper","natping_interval",30)
modparam("nathelper","ping_nated_only",1)
modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock")
#################33
modparam("rr", "enable_full_lr", 1)
###############################################
route    {
    # initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
        if (!mf_process_maxfwd_header("13")) {
            sl_send_reply("483","Too Many Hops........................!");
            exit;
        };
        if ( msg:len > max_len ) {
        sl_send_reply("513", "Message too big");
        exit;
        };

# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
    record_route();
# loose-route processing
    if (loose_route()) {
        t_relay();
        setflag(1);
        exit;
    };


# account completed transactions via syslog
    setflag(1);
    setflag(2);
    if(uri==myself)
    {
        if(method=="REGISTER")
            {
                if(!radius_www_authorize("192.168.2.55"))
                    {
                        www_challenge("192.168.2.55","1");
                        exit;
                    };
                save("location");
                if (m_dump())
                    {
                        log("MSILO: offline messages dumped - if they
were\n");
                    }else{
                        log("MSILO: no offline messages dumped\n");
                    };

                exit;
            };
        if(method=="INVITE"|| method=="ACK")
            {
                acc_rad_request("Start");
                record_route();
                force_rtp_proxy();
                #setflag(1);
                t_on_reply("1");
            };
        if (method=="BYE") {
            record_route();
            };


        if (method=="MESSAGE") {
            log(1, "MESSAGE\n");
            setflag(1); /* set for accounting (the same value as in
log_flag!) */
            };

        if (method=="BYE" || method=="CANCEL") {
            #log (1, "BYE or CANCEL\n");
            #setflag(1);

            acc_rad_request("Stop");
            setflag(1);

        };
        if(!lookup("location"))
            {
                sl_send_reply("404","Woo......... NOt found");
            };
        };
        lookup("aliases");
        setflag(2);
        if(!t_relay())
            {
                sl_reply_error();
            };
    }
    onreply_route[1]
        {
            if(status=~"[0-9][0-9][0-9]")
            {
                force_rtp_proxy();
            };
        }

-- 
Thanks and Regards with cheers
Sunkara Ravi Prakash (Voip Developer)
Hyperion Technology
www.hyperion-tech.com
<b>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20060603/2d93d7c8/attachment.htm>


More information about the sr-users mailing list