[Serusers] Account module Help
ravi reddy
mravikreddy at gmail.com
Wed Jul 5 09:53:45 CEST 2006
Thank you Mr.GREGER V. Teigre
yesterday i tried in almost all places by keeping the flags at
last i found two places one in loose route and another before loose route
section but for both
methods iam getting another problem :- that is in radius database in radacct
table iam getting two entries for single call it show like this -->
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
radaccid| username | AcctstartTime |
AcctStopTime | calledstationid |
AcctSessionTime|
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
| 20 | 32331001 at 81.21.34.37 | 2006-07-05 10:44:09 | 2006-07-05
10:45:24 | sip:22223333 at 81.21.34.37 | 0 |
| 21 | 32331001 at 81.21.34.37 | 2006-07-05 10:44:09 | 2006-07-05
10:45:24 | sip:22223333 at 81.21.34.37 | 0 |
-___________________________________________________________________________________________
so this is the problem i have had now how can i get only a single radacctid
for a single call
please help me Thanks in Advance
Regards
Ravi.
On 7/5/06, Greger V. Teigre <greger at teigre.com> wrote:
>
> You probably haven't set the accounting flag in your loose_route
> handling. Do a test pretty early in your ser.cfg main route (before
> if(loose_route()) and set the appropriate flags.
> g-)
>
>
> ravi reddy wrote:
>
> Thanks For your Response Mr. Greger V. Teigre
>
> I did it ,by checking the dictionaries by seeing your
> messages in 2004 archives ,
>
> but here i got a problem is that if i set "radius flag" in ser.cfg near
> call invite then i am only getting AccStartTime but not AccStop Time
>
> If i set flags near (cancel or Bye) iam getting only account stop
> time and the acct start time is not showing ,
>
> if i set two places even then iam getting only one time
>
>
> +----------------------+---------------------+---------------------+--------------------------+--------------------------+
>
> | username | acctstarttime | acctstoptime |
> callingstationid | calledstationid |
> +----------------------+---------------------+---------------------+--------------------------+--------------------------+
>
> | 32331001 at 81.21.34.37 | 2006-07-04 18:45:50 | 2006-07-04 18:45:50 |
> sip:32331001 at 81.21.34.37 | sip:22223333 at 81.21.34.37 |
> | 32331001 at 81.21.34.37 | 2006-07-04 18:36:29 | 2006-07-04 18:36:29 |
> sip:32331001 at 81.21.34.37 | sip:22223333 at 81.21.34.37 |
> | 32331001 at 81.21.34.37 | 2006-07-04 18:17:35 | 2006-07-04 18:17:35 |
> sip:32331001 at 81.21.34.37 | sip:22223333 at 81.21.34.37 |
> | 32331001 at 81.21.34.37 | 2006-07-04 18:32:50 | 2006-07-04 18:32:50 |
> sip:32331001 at 81.21.34.37 | sip:22223333 at 81.21.34.37 |
>
> +----------------------+---------------------+---------------------+--------------------------+--------------------------+
>
>
> so how i can get out of this trouble please help me ;
>
>
> Thank you
> regards
> Ravi.
>
>
>
>
> On 7/4/06, Greger V. Teigre <greger at teigre.com> wrote:
> >
> > I suggest you figure out your dictionary first (ref. your other post).
> > Without the attributes in place, you get nowhere.
> > Remember that there are several elements to radius functionality in SER:
> > - standalone radius server
> > - dictionary file for radius server
> > - SER radius modules compiled and linked against radiusclient-ng
> > (library)
> > - the radiusclient.conf file defining the setup for the radius client
> > (used by SER radius modules)
> > - dictionary file for radiusclient-ng
> >
> > The attributes used are defined in SER modules. All attributes must be
> > found in the radiusclient.conf file (so that the radiusclient can
> > understand the attributes defined in the modules).
> > Then the radiusserver needs to understand all the attributes (using it's
> > own dictionary).
> >
> > It looks like this:
> > ser.cfg radiusauth or setflag (acc_flag) => calls radius module =>
> > linked against radiusclient-ng.so => reads radiusclient.conf and
> > dictionary => sends requests on udp 1812 and 1813 => radius server listens
> > on ports and handles request responding back to radiusclent, which returns
> > data (or just ok) to the module
> >
> > g-)
> >
> >
> > ravi reddy wrote:
> >
> > Mr. Greger V.Teigre
> >
> > Thanks for your response , when i tried changing line as
> > radius_log_flag the SER is showing there is no module like Radius_log_flag
> > in acc module but when i keep like radius_flag its showing o.k
> > but here my doubt is are the accounting messages will log in to
> > radius???
> > my config file is accepting the radius_missed_flag...
> > is this setting will log the messages in radacct????
> >
> >
> > Are you using FreeRadius for accounting ???
> >
> > waiting for your reply
> >
> > Regards
> > Ravi.
> >
> >
> >
> > On 7/4/06, Greger V. Teigre <greger at teigre.com > wrote:
> > >
> > > "To enable RADIUS accounting simply use radius_log_flag and
> > > radius_log_missed_flag parameters instead of log_flag and log_missed_flag.
> > > Mark transactions that should be logged with flags configured in the
> > > parameters."
> > >
> > > This means that you use modparam to set the flag values for these two
> > > and then use setflag(yourflag) where you want radius accounting to happen.
> > > g-)
> > >
> > > ravi reddy wrote:
> > > Hi SER Users ,
> > >
> > > I tried to install SER with basic configurations and
> > > also with onsip config file with these SER is working pretty good ,Now i
> > > want to test accounting on radius server i installed Radius server with sql
> > > module and it is listening on 1813 for accounting , i am using
> > > radiusclient-ng-0.5.2 and i append dictionary.ser to main dictionary
> > > file. every thing is o.k
> > >
> > > Now , how can I get the accounting details in
> > > radius server is there any specific configuration to do that ?
> > > in ser.cfg i make some changes as shown in SER_RADIUS HOW TO's but i
> > > dont understand the way to move ........... :-(
> > >
> > > so any body can please tell me an out line scenario how to send
> > > account packets to radius server so that i will work on that ;
> > >
> > > Thanks in Advance
> > >
> > > Regards'
> > > Ravi.
> > >
> > > ------------------------------
> > >
> > > _______________________________________________
> > > Serusers mailing list
> > > Serusers at lists.iptel.orghttp://lists.iptel.org/mailman/listinfo/serusers
> > >
> > >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20060705/f3c73eed/attachment.htm>
More information about the sr-users
mailing list